# Generated from ltmain.m4sh.
# ltmain.sh (GNU libtool) 2.2.6b
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License,
# if you distribute this file as part of a program or library that
# is built using GNU Libtool, you may include this file under the
# same distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU Libtool; see the file COPYING. If not, a copy
# can be downloaded from http://www.gnu.org/licenses/gpl.html,
# or obtained by writing to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
# Usage: $progname [OPTION]... [MODE-ARG]...
#
# Provide generalized library-building support services.
#
# --config show all configuration variables
# --debug enable verbose shell tracing
# -n, --dry-run display commands without modifying any files
# --features display basic configuration information and exit
# --mode=MODE use operation mode MODE
# --preserve-dup-deps don't remove duplicate dependency libraries
# --quiet, --silent don't print informational messages
# --tag=TAG use configuration variables from tag TAG
# -v, --verbose print informational messages (default)
# --version print version information
# -h, --help print short or long help message
#
# MODE must be one of the following:
#
# clean remove files from the build directory
# compile compile a source file into a libtool object
# execute automatically set library path, then run a program
# finish complete the installation of libtool libraries
# install install libraries or executables
# link create a library or an executable
# uninstall remove libraries from an installed directory
#
# MODE-ARGS vary depending on the MODE.
# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
#
# When reporting a bug, please describe a test case to reproduce it and
# include the following information:
#
# host-triplet: $host
# shell: $SHELL
# compiler: $LTCC
# compiler flags: $LTCFLAGS
# linker: $LD (gnu? $with_gnu_ld)
# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2
# automake: $automake_version
# autoconf: $autoconf_version
#
# Report bugs to <bug-libtool@gnu.org>.
PROGRAM=ltmain.sh
PACKAGE=libtool
VERSION="2.2.6b Debian-2.2.6b-2"
TIMESTAMP=""
package_revision=1.3017
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
# NLS nuisances: We save the old values to restore during execute mode.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
lt_user_locale=
lt_safe_locale=
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${$lt_var+set}\" = set; then
save_$lt_var=\$$lt_var
$lt_var=C
export $lt_var
lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
fi"
done
$lt_unset CDPATH
: ${CP="cp -f"}
: ${ECHO="echo"}
: ${EGREP="/bin/grep -E"}
: ${FGREP="/bin/grep -F"}
: ${GREP="/bin/grep"}
: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
: ${SED="/bin/sed"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
: ${Xsed="$SED -e 1s/^X//"}
# Global variables:
EXIT_SUCCESS=0
EXIT_FAILURE=1
EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
exit_status=$EXIT_SUCCESS
# Make sure IFS has a sensible default
lt_nl='
'
IFS=" $lt_nl"
dirname="s,/[^/]*$,,"
basename="s,^.*/,,"
# func_dirname_and_basename file append nondir_replacement
# perform func_basename and func_dirname in a single function
# call:
# dirname: Compute the dirname of FILE. If nonempty,
# add APPEND to the result, otherwise set result
# to NONDIR_REPLACEMENT.
# value returned in "$func_dirname_result"
# basename: Compute filename of FILE.
# value retuned in "$func_basename_result"
# Implementation must be kept synchronized with func_dirname
# and func_basename. For efficiency, we do not delegate to
# those functions but instead duplicate the functionality here.
func_dirname_and_basename ()
{
# Extract subdirectory from the argument.
func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
if test "X$func_dirname_result" = "X${1}"; then
func_dirname_result="${3}"
else
func_dirname_result="$func_dirname_result${2}"
fi
func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
}
# Generated shell functions inserted here.
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath="$0"
# The name of this program:
# In the unlikely event $progname began with a '-', it would play havoc with
# func_echo (imagine progname=-n), so we prepend ./ in that case:
func_dirname_and_basename "$progpath"
progname=$func_basename_result
case $progname in
-*) progname=./$progname ;;
esac
# Make sure we have an absolute path for reexecution:
case $progpath in
[\\/]*|[A-Za-z]:\\*) ;;
*[\\/]*)
progdir=$func_dirname_result
progdir=`cd "$progdir" && pwd`
progpath="$progdir/$progname"
;;
*)
save_IFS="$IFS"
IFS=:
for progdir in $PATH; do
IFS="$save_IFS"
test -x "$progdir/$progname" && break
done
IFS="$save_IFS"
test -n "$progdir" || progdir=`pwd`
progpath="$progdir/$progname"
;;
esac
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\(["`\\]\)/\\\1/g'
# Re-`\' parameter expansions in output of double_quote_subst that were
# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
# in input to double_quote_subst, that '$' was protected from expansion.
# Since each input `\' is now two `\'s, look for any number of runs of
# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
bs='\\'
bs2='\\\\'
bs4='\\\\\\\\'
dollar='\$'
sed_double_backslash="\
s/$bs4/&\\
/g
s/^$bs2$dollar/$bs&/
s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
s/\n//g"
# Standard options:
opt_dry_run=false
opt_help=false
opt_quiet=false
opt_verbose=false
opt_warning=:
# func_echo arg...
# Echo program name prefixed message, along with the current mode
# name if it has been set yet.
func_echo ()
{
$ECHO "$progname${mode+: }$mode: $*"
}
# func_verbose arg...
# Echo program name prefixed message in verbose mode only.
func_verbose ()
{
$opt_verbose && func_echo ${1+"$@"}
# A bug in bash halts the script if the last line of a function
# fails when set -e is in force, so we need another command to
# work around that:
:
}
# func_error arg...
# Echo program name prefixed message to standard error.
func_error ()
{
$ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
}
# func_warning arg...
# Echo program name prefixed warning message to standard error.
func_warning ()
{
$opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
# bash bug again:
:
}
# func_fatal_error arg...
# Echo program name prefixed message to standard error, and exit.
func_fatal_error ()
{
func_error ${1+"$@"}
exit $EXIT_FAILURE
}
# func_fatal_help arg...
# Echo program name prefixed message to standard error, followed by
# a help hint, and exit.
func_fatal_help ()
{
func_error ${1+"$@"}
func_fatal_error "$help"
}
help="Try \`$progname --help' for more information." ## default
# func_grep expression filename
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
$GREP "$1" "$2" >/dev/null 2>&1
}
# func_mkdir_p directory-path
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
my_directory_path="$1"
my_dir_list=
if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
# Protect directory names starting with `-'
case $my_directory_path in
-*) my_directory_path="./$my_directory_path" ;;
esac
# While some portion of DIR does not yet exist...
while test ! -d "$my_directory_path"; do
# ...make a list in topmost first order. Use a colon delimited
# list incase some portion of path contains whitespace.
my_dir_list="$my_directory_path:$my_dir_list"
# If the last portion added has no slash in it, the list is done
case $my_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
done
my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
save_mkdir_p_IFS="$IFS"; IFS=':'
for my_dir in $my_dir_list; do
IFS="$save_mkdir_p_IFS"
# mkdir can fail with a `File exist' error if two processes
# try to create one of the directories concurrently. Don't
# stop in that case!
$MKDIR "$my_dir" 2>/dev/null || :
done
IFS="$save_mkdir_p_IFS"
# Bail out if we (or some other process) failed to create a directory.
test -d "$my_directory_path" || \
func_fatal_error "Failed to create \`$1'"
fi
}
# func_mktempdir [string]
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
# given, STRING is the basename for that directory.
func_mktempdir ()
{
my_template="${TMPDIR-/tmp}/${1-$progname}"
if test "$opt_dry_run" = ":"; then
# Return a directory name, but don't create it in dry-run mode
my_tmpdir="${my_template}-$$"
else
# If mktemp works, use that first and foremost
my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
if test ! -d "$my_tmpdir"; then
# Failing that, at least try and use $RANDOM to avoid a race
my_tmpdir="${my_template}-${RANDOM-0}$$"
save_mktempdir_umask=`umask`
umask 0077
$MKDIR "$my_tmpdir"
umask $save_mktempdir_umask
fi
# If we're not in dry-run mode, bomb out on failure
test -d "$my_tmpdir" || \
func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
fi
$ECHO "X$my_tmpdir" | $Xsed
}
# func_quote_for_eval arg
# Aesthetically quote ARG to be evaled later.
# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
# is double-quoted, suitable for a subsequent eval, whereas
# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
# which are still active within double quotes backslashified.
func_quote_for_eval ()
{
case $1 in
*[\\\`\"\$]*)
func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
*)
func_quote_for_eval_unquoted_result="$1" ;;
esac
case $func_quote_for_eval_unquoted_result in
# Double-quote args containing shell metacharacters to delay
# word splitting, command substitution and and variable
# expansion for a subsequent eval.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
;;
*)
func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
esac
}
# func_quote_for_expand arg
# Aesthetically quote ARG to be evaled later; same as above,
# but do not quote variable references.
func_quote_for_expand ()
{
case $1 in
*[\\\`\"]*)
my_arg=`$ECHO "X$1" | $Xsed \
-e "$double_quote_subst" -e "$sed_double_backslash"` ;;
*)
my_arg="$1" ;;
esac
case $my_arg in
# Double-quote args containing shell metacharacters to delay
# word splitting and command substitution for a subsequent eval.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
my_arg="\"$my_arg\""
;;
esac
func_quote_for_expand_result="$my_arg"
}
# func_show_eval cmd [fail_exp]
# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.
func_show_eval ()
{
my_cmd="$1"
my_fail_exp="${2-:}"
${opt_silent-false} || {
func_quote_for_expand "$my_cmd"
eval "func_echo $func_quote_for_expand_result"
}
if ${opt_dry_run-false}; then :; else
eval "$my_cmd"
my_status=$?
if test "$my_status" -eq 0; then :; else
eval "(exit $my_status); $my_fail_exp"
fi
fi
}
# func_show_eval_locale cmd [fail_exp]
# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it. Use the saved locale for evaluation.
func_show_eval_locale ()
{
my_cmd="$1"
my_fail_exp="${2-:}"
${opt_silent-false} || {
func_quote_for_expand "$my_cmd"
eval "func_echo $func_quote_for_expand_result"
}
if ${opt_dry_run-false}; then :; else
eval "$lt_user_locale
$my_cmd"
my_status=$?
eval "$lt_safe_locale"
if test "$my_status" -eq 0; then :; else
eval "(exit $my_status); $my_fail_exp"
fi
fi
}
# func_version
# Echo version message to standard output and exit.
func_version ()
{
$SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
s/^# //
s/^# *$//
s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
p
}' < "$progpath"
exit $?
}
# func_usage
# Echo short help message to standard output and exit.
func_usage ()
{
$SED -n '/^# Usage:/,/# -h/ {
s/^# //
s/^# *$//
s/\$progname/'$progname'/
p
}' < "$progpath"
$ECHO
$ECHO "run \`$progname --help | more' for full usage"
exit $?
}
# func_help
# Echo long help message to standard output and exit.
func_help ()
{
$SED -n '/^# Usage:/,/# Report bugs to/ {
s/^# //
s/^# *$//
s*\$progname*'$progname'*
s*\$host*'"$host"'*
s*\$SHELL*'"$SHELL"'*
s*\$LTCC*'"$LTCC"'*
s*\$LTCFLAGS*'"$LTCFLAGS"'*
s*\$LD*'"$LD"'*
s/\$with_gnu_ld/'"$with_gnu_ld"'/
s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
p
}' < "$progpath"
exit $?
}
# func_missing_arg argname
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
func_error "missing argument for $1"
exit_cmd=exit
}
exit_cmd=:
# Check that we have a working $ECHO.
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
# Yippee, $ECHO works!
:
else
# Restart under the correct shell, and then maybe $ECHO will work.
exec $SHELL "$progpath" --no-reexec ${1+"$@"}
fi
if test "X$1" = X--fallback-echo; then
# used as fallback echo
shift
cat <<EOF
$*
EOF
exit $EXIT_SUCCESS
fi
magic="%%%MAGIC variable%%%"
magic_exe="%%%MAGIC EXE variable%%%"
# Global variables.
# $mode is unset
nonopt=
execute_dlfiles=
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
extracted_archives=
extracted_serial=0
opt_dry_run=false
opt_duplicate_deps=false
opt_silent=false
opt_debug=:
# If this variable is set in any of the actions, the command in it
# will be execed at the end. This prevents here-documents from being
# left over by shells.
exec_cmd=
# func_fatal_configuration arg...
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
func_error ${1+"$@"}
func_error "See the $PACKAGE documentation for more information."
func_fatal_error "Fatal configuration error."
}
# func_config
# Display the configuration for all the tags in this script.
func_config ()
{
re_begincf='^# ### BEGIN LIBTOOL'
re_endcf='^# ### END LIBTOOL'
# Default configuration.
$SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
# Now print the configurations for the tags.
for tagname in $taglist; do
$SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
done
exit $?
}
# func_features
# Display the features supported by this script.
func_features ()
{
$ECHO "host: $host"
if test "$build_libtool_libs" = yes; then
$ECHO "enable shared libraries"
else
$ECHO "disable shared libraries"
fi
if test "$build_old_libs" = yes; then
$ECHO "enable static libraries"
else
$ECHO "disable static libraries"
fi
exit $?
}
# func_enable_tag tagname
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
# Global variable:
tagname="$1"
re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
sed_extractcf="/$re_begincf/,/$re_endcf/p"
# Validate tagname.
case $tagname in
*[!-_A-Za-z0-9,/]*)
func_fatal_error "invalid tag name: $tagname"
;;
esac
# Don't test for the "default" C tag, as we know it's
# there but not specially marked.
case $tagname in
CC) ;;
*)
if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
taglist="$taglist $tagname"
# Evaluate the configuration. Be careful to quote the path
# and the sed script, to avoid splitting on whitespace, but
# also don't use non-portable quotes within backquotes within
# quotes we have to do it in 2 steps:
extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
eval "$extractedcf"
else
func_error "ignoring unknown tag $tagname"
fi
;;
esac
}
# Parse options once, thoroughly. This comes as soon as possible in
# the script to make things like `libtool --version' happen quickly.
{
# Shorthand for --mode=foo, only valid as the first argument
case $1 in
clean|clea|cle|cl)
shift; set dummy --mode clean ${1+"$@"}; shift
;;
compile|compil|compi|comp|com|co|c)
shift; set dummy --mode compile ${1+"$@"}; shift
;;
execute|execut|execu|exec|exe|ex|e)
shift; set dummy --mode execute ${1+"$@"}; shift
;;
finish|finis|fini|fin|fi|f)
shift; set dummy --mode finish ${1+"$@"}; shift
;;
install|instal|insta|inst|ins|in|i)
shift; set dummy --mode install ${1+"$@"}; shift
;;
link|lin|li|l)
shift; set dummy --mode link ${1+"$@"}; shift
;;
uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
shift; set dummy --mode uninstall ${1+"$@"}; shift
;;
esac
# Parse non-mode specific arguments:
while test "$#" -gt 0; do
opt="$1"
shift
case $opt in
--config) func_config ;;
--debug) preserve_args="$preserve_args $opt"
func_echo "enabling shell trace mode"
opt_debug='set -x'
$opt_debug
;;
-dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
execute_dlfiles="$execute_dlfiles $1"
shift
;;
--dry-run | -n) opt_dry_run=: ;;
--features) func_features ;;
--finish) mode="finish" ;;
--mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
case $1 in
# Valid mode arguments:
clean) ;;
compile) ;;
execute) ;;
finish) ;;
install) ;;
link) ;;
relink) ;;
uninstall) ;;
# Catch anything else as an error
*) func_error "invalid argument for $opt"
exit_cmd=exit
break
;;
esac
mode="$1"
shift
;;
--preserve-dup-deps)
opt_duplicate_deps=: ;;
--quiet|--silent) preserve_args="$preserve_args $opt"
opt_silent=:
;;
--verbose| -v) preserve_args="$preserve_args $opt"
opt_silent=false
;;
--tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
preserve_args="$preserve_args $opt $1"
func_enable_tag "$1" # tagname is set here
shift
;;
# Separate optargs to long options:
-dlopen=*|--mode=*|--tag=*)
func_opt_split "$opt"
set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
shift
;;
-\?|-h) func_usage ;;
--help) opt_help=: ;;
--version) func_version ;;
-*) func_fatal_help "unrecognized option \`$opt'" ;;
*) nonopt="$opt"
break
;;
esac
done
case $host in
*cygwin* | *mingw* | *pw32* | *cegcc*)
# don't eliminate duplications in $postdeps and $predeps
opt_duplicate_compiler_generated_deps=:
;;
*)
opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
;;
esac
# Having warned about all mis-specified options, bail out if
# anything was wrong.
$exit_cmd $EXIT_FAILURE
}
# func_check_version_match
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
if test "$package_revision" != "$macro_revision"; then
if test "$VERSION" != "$macro_version"; then
if test -z "$macro_version"; then
cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
else
cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
fi
else
cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
fi
exit $EXIT_MISMATCH
fi
}
## ----------- ##
## Main. ##
## ----------- ##
$opt_help || {
# Sanity checks first:
func_check_version_match
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
func_fatal_configuration "not configured to build any kind of library"
fi
test -z "$mode" && func_fatal_error "error: you must specify a MODE."
# Darwin sucks
eval std_shrext=\"$shrext_cmds\"
# Only execute mode is allowed to have -dlopen flags.
if test -n "$execute_dlfiles" && test "$mode" != execute; then
func_error "unrecognized option \`-dlopen'"
$ECHO "$help" 1>&2
exit $EXIT_FAILURE
fi
# Change the help message to a mode-specific one.
generic_help="$help"
help="Try \`$progname --help --mode=$mode' for more information."
}
# func_lalib_p file
# True iff FILE is a libtool `.la' library or `.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
test -f "$1" &&
$SED -e 4q "$1" 2>/dev/null \
| $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
}
# func_lalib_unsafe_p file
# True iff FILE is a libtool `.la' library or `.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs. To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
# fatal anyway. Works if `file' does not exist.
func_lalib_unsafe_p ()
{
lalib_p=no
if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
for lalib_p_l in 1 2 3 4
do
read lalib_p_line
case "$lalib_p_line" in
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
exec 0<&5 5<&-
fi
test "$lalib_p" = yes
}
# func_ltwrapper_script_p file
# True iff FILE is a libtool wrapper script
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_script_p ()
{
func_lalib_p "$1"
}
# func_ltwrapper_executable_p file
# True iff FILE is a libtool wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_executable_p ()
{
func_ltwrapper_exec_suffix=
case $1 in
*.exe) ;;
*) func_ltwrapper_exec_suffix=.exe ;;
esac
$GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
}
# func_ltwrapper_scriptname file
# Assumes file is an ltwrapper_executable
# uses $file to determine the appropriate filename for a
# temporary ltwrapper_script.
func_ltwrapper_scriptname ()
{
func_ltwrapper_scriptname_result=""
if func_ltwrapper_executable_p "$1"; then
func_dirname_and_basename "$1" "" "."
func_stripname '' '.exe' "$func_basename_result"
func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
fi
}
# func_ltwrapper_p file
# True iff FILE is a libtool wrapper script or wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_p ()
{
func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
}
# func_execute_cmds commands fail_cmd
# Execute tilde-delimited COMMANDS.
# If FAIL_CMD is given, eval that upon failure.
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
$opt_debug
save_ifs=$IFS; IFS='~'
for cmd in $1; do
IFS=$save_ifs
eval cmd=\"$cmd\"
func_show_eval "$cmd" "${2-:}"
done
IFS=$save_ifs
}
# func_source file
# Source FILE, adding directory component if necessary.
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
# `FILE.' does not work on cygwin managed mounts.
func_source ()
{
$opt_debug
case $1 in
*/* | *\\*) . "$1" ;;
*) . "./$1" ;;
esac
}
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
$opt_debug
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
func_quote_for_eval "$arg"
CC_quoted="$CC_quoted $func_quote_for_eval_result"
done
case $@ in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
" $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
for z in $available_tags; do
if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
func_quote_for_eval "$arg"
CC_quoted="$CC_quoted $func_quote_for_eval_result"
done
case "$@ " in
" $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
tagname=$z
break
;;
esac
fi
done
# If $tagname still isn't set, then no tagged configuration
# was found and let the user know that the "--tag" command
# line option must be used.
if test -z "$tagname"; then
func_echo "unable to infer tagged configuration"
func_fatal_error "specify a tag with \`--tag'"
# else
# func_verbose "using $tagname tagged configuration"
fi
;;
esac
fi
}
# func_write_libtool_object output_name pic_name nonpic_name
# Create a libtool object file (analogous to a ".la" file),
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
write_libobj=${1}
if test "$build_libtool_libs" = yes; then
write_lobj=\'${2}\'
else
write_lobj=none
fi
if test "$build_old_libs" = yes; then
write_oldobj=\'${3}\'
else
write_oldobj=none
fi
$opt_dry_run || {
cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# Name of the PIC object.
pic_object=$write_lobj
# Name of the non-PIC object
non_pic_object=$write_oldobj
EOF
$MV "${write_libobj}T" "${write_libobj}"
}
}
# func_mode_compile arg...
func_mode_compile ()
{
$opt_debug
# Get the compilation command and the source file.
base_compile=
srcfile="$nonopt" # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
libobj=
later=
pie_flag=
for arg
do
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
lastarg="$arg"
arg_mode=normal
;;
target )
libobj="$arg"
arg_mode=normal
continue
;;
normal )
# Accept any command-line options.
case $arg in
-o)
test -n "$libobj" && \
func_fatal_error "you cannot specify \`-o' more than once"
arg_mode=target
continue
;;
-pie | -fpie | -fPIE)
pie_flag="$pie_flag $arg"
continue
;;
-shared | -static | -prefer-pic | -prefer-non-pic)
later="$later $arg"
continue
;;
-no-suppress)
suppress_opt=no
continue
;;
-Xcompiler)
arg_mode=arg # the next one goes into the "base_compile" arg list
continue # The current "srcfile" will either be retained or
;; # replaced later. I would guess that would be a bug.
-Wc,*)
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
lastarg=
save_ifs="$IFS"; IFS=','
for arg in $args; do
IFS="$save_ifs"
func_quote_for_eval "$arg"
lastarg="$lastarg $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
# Add the arguments to base_compile.
base_compile="$base_compile $lastarg"
continue
;;
*)
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
lastarg="$srcfile"
srcfile="$arg"
;;
esac # case $arg
;;
esac # case $arg_mode
# Aesthetically quote the previous argument.
func_quote_for_eval "$lastarg"
base_compile="$base_compile $func_quote_for_eval_result"
done # for arg
case $arg_mode in
arg)
func_fatal_error "you must specify an argument for -Xcompile"
;;
target)
func_fatal_error "you must specify a target with \`-o'"
;;
*)
# Get the name of the library object.
test -z "$libobj" && {
func_basename "$srcfile"
libobj="$func_basename_result"
}
;;
esac
# Recognize several different file suffixes.
# If the user specifies -o file.o, it is replaced with file.lo
case $libobj in
*.[cCFSifmso] | \
*.ada | *.adb | *.ads | *.asm | \
*.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
*.[fF][09]? | *.for | *.java | *.obj | *.sx)
func_xform "$libobj"
libobj=$func_xform_result
;;
esac
case $libobj in
*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
func_fatal_error "cannot determine name of library object from \`$libobj'"
;;
esac
func_infer_tag $base_compile
for arg in $later; do
case $arg in
-shared)
test "$build_libtool_libs" != yes && \
func_fatal_configuration "can not build a shared library"
build_old_libs=no
continue
;;
-static)
build_libtool_libs=no
build_old_libs=yes
continue
;;
-prefer-pic)
pic_mode=yes
continue
;;
-prefer-non-pic)
pic_mode=no
continue
;;
esac
done
func_quote_for_eval "$libobj"
test "X$libobj" != "X$func_quote_for_eval_result" \
&& $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
&& func_warning "libobj name \`$libobj' may not contain shell special characters."
func_dirname_and_basename "$obj" "/" ""
objname="$func_basename_result"
xdir="$func_dirname_result"
lobj=${xdir}$objdir/$objname
test -z "$base_compile" && \
func_fatal_help "you must specify a compilation command"
# Delete any leftover library objects.
if test "$build_old_libs" = yes; then
removelist="$obj $lobj $libobj ${libobj}T"
else
removelist="$lobj $libobj ${libobj}T"
fi
# On Cygwin there's no "real" PIC flag so we must build both object types
case $host_os in
cygwin* | mingw* | pw32* | os2* | cegcc*)
pic_mode=default
;;
esac
if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
# Calculate the filename of the output object if compiler does
# not support -o with -c
if test "$compiler_c_o" = no; then
output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
else
output_obj=
need_locks=no
lockfile=
fi
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
if test "$need_locks" = yes; then
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
elif test "$need_locks" = warn; then
if test -f "$lockfile"; then
$ECHO "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
removelist="$removelist $output_obj"
$ECHO "$srcfile" > "$lockfile"
fi
$opt_dry_run || $RM $removelist
removelist="$removelist $lockfile"
trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
func_quote_for_eval "$srcfile"
qsrcfile=$func_quote_for_eval_result
# Only build a PIC object if we are building libtool libraries.
if test "$build_libtool_libs" = yes; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
if test "$pic_mode" != no; then
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
command="$base_compile $qsrcfile"
fi
func_mkdir_p "$xdir$objdir"
if test -z "$output_obj"; then
# Place PIC objects in $objdir
command="$command -o $lobj"
fi
func_show_eval_locale "$command" \
'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
if test "$need_locks" = warn &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
but it should contain:
$srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
# Just move the object if needed, then go on to compile the next one
if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
func_show_eval '$MV "$output_obj" "$lobj"' \
'error=$?; $opt_dry_run || $RM $removelist; exit $error'
fi
# Allow error messages only from the first compilation.
if test "$suppress_opt" = yes; then
suppress_output=' >/dev/null 2>&1'
fi
fi
# Only build a position-dependent object if we build old libraries.
if test "$build_old_libs" = yes; then
if test "$pic_mode" != yes; then
# Don't build PIC code
command="$base_compile $qsrcfile$pie_flag"
else
command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
fi
# Suppress compiler output if we already did a PIC compilation.
command="$command$suppress_output"
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
if test "$need_locks" = warn &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
but it should contain:
$srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
# Just move the object if needed
if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
func_show_eval '$MV "$output_obj" "$obj"' \
'error=$?; $opt_dry_run || $RM $removelist; exit $error'
fi
fi
$opt_dry_run || {
func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
# Unlock the critical section if it was locked
if test "$need_locks" != no; then
removelist=$lockfile
$RM "$lockfile"
fi
}
exit $EXIT_SUCCESS
}
$opt_help || {
test "$mode" = compile && func_mode_compile ${1+"$@"}
}
func_mode_help ()
{
# We need to display help for each of the modes.
case $mode in
"")
# Generic help is extracted from the usage comments
# at the start of this file.
func_help
;;
clean)
$ECHO \
"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
Remove files from the build directory.
RM is the name of the program to use to delete files associated with each FILE
(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
to RM.
If FILE is a libtool library, object or program, all the files associated
with it are deleted. Otherwise, only FILE itself is deleted using RM."
;;
compile)
$ECHO \
"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
Compile a source file into a libtool library object.
This mode accepts the following additional options:
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
-no-suppress do not suppress compiler output for multiple passes
-prefer-pic try to building PIC objects only
-prefer-non-pic try to building non-PIC objects only
-shared do not build a \`.o' file suitable for static linking
-static only build a \`.o' file suitable for static linking
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
from the given SOURCEFILE.
The output file name is determined by removing the directory component from
SOURCEFILE, then substituting the C source code suffix \`.c' with the
library object suffix, \`.lo'."
;;
execute)
$ECHO \
"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
Automatically set library path, then run a program.
This mode accepts the following additional options:
-dlopen FILE add the directory containing FILE to the library path
This mode sets the library path environment variable according to \`-dlopen'
flags.
If any of the ARGS are libtool executable wrappers, then they are translated
into their corresponding uninstalled binary, and any of their required library
directories are added to the library path.
Then, COMMAND is executed, with ARGS as arguments."
;;
finish)
$ECHO \
"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
Complete the installation of libtool libraries.
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
the \`--dry-run' option if you just want to see what would be executed."
;;
install)
$ECHO \
"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
Install executables or libraries.
INSTALL-COMMAND is the installation command. The first component should be
either the \`install' or \`cp' program.
The following components of INSTALL-COMMAND are treated specially:
-inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
;;
link)
$ECHO \
"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
Link object files or libraries together to form another library, or to
create an executable program.
LINK-COMMAND is a command using the C compiler that you would use to create
a program from several object files.
The following components of LINK-COMMAND are treated specially:
-all-static do not do any dynamic linking at all
-avoid-version do not add a version suffix if possible
-dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
-no-fast-install disable the fast-install mode
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
-objectlist FILE Use a list of object files found in FILE to specify objects
-precious-files-regex REGEX
don't remove output files matching REGEX
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
-shared only do dynamic linking of libtool libraries
-shrext SUFFIX override the standard shared library file extension
-static do not do any dynamic linking of uninstalled libtool libraries
-static-libtool-libs
do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
specify library version info [each variable defaults to 0]
-weak LIBNAME declare that the target provides the LIBNAME interface
All other options (arguments beginning with \`-') are ignored.
Every other argument is treated as a filename. Files ending in \`.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
only library objects (\`.lo' files) may be specified, and \`-rpath' is
required, except when creating a convenience library.
If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
using \`ar' and \`ranlib', or on Windows using \`lib'.
If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
is created, otherwise an executable program is created."
;;
uninstall)
$ECHO \
"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
Otherwise, only FILE itself is deleted using RM."
;;
*)
func_fatal_help "invalid operation mode \`$mode'"
;;
esac
$ECHO
$ECHO "Try \`$progname --help' for more information about other modes."
exit $?
}
# Now that we've collected a possible --mode arg, show help if necessary
$opt_help && func_mode_help
# func_mode_execute arg...
func_mode_execute ()
{
$opt_debug
# The first argument is the command name.
cmd="$nonopt"
test -z "$cmd" && \
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
for file in $execute_dlfiles; do
test -f "$file" \
|| func_fatal_help "\`$file' is not a file"
dir=
case $file in
*.la)
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "\`$lib' is not a valid libtool archive"
# Read the libtool library.
dlname=
library_names=
func_source "$file"
# Skip this library if it cannot be dlopened.
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && \
func_warning "\`$file' was not linked with \`-export-dynamic'"
continue
fi
func_dirname "$file" "" "."
dir="$func_dirname_result"
if test -f "$dir/$objdir/$dlname"; then
dir="$dir/$objdir"
else
if test ! -f "$dir/$dlname"; then
func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
fi
fi
;;
*.lo)
# Just add the directory containing the .lo file.
func_dirname "$file" "" "."
dir="$func_dirname_result"
;;
*)
func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
test -n "$absdir" && dir="$absdir"
# Now add the directory to shlibpath_var.
if eval "test -z \"\$$shlibpath_var\""; then
eval "$shlibpath_var=\"\$dir\""
else
eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
fi
done
# This variable tells wrapper scripts just to set shlibpath_var
# rather than running their programs.
libtool_execute_magic="$magic"
# Check if any of the arguments is a wrapper script.
args=
for file
do
case $file in
-*) ;;
*)
# Do a test to see if this is really a libtool program.
if func_ltwrapper_script_p "$file"; then
func_source "$file"
# Transform arg to wrapped name.
file="$progdir/$program"
elif func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
func_source "$func_ltwrapper_scriptname_result"
# Transform arg to wrapped name.
file="$progdir/$program"
fi
;;
esac
# Quote arguments (to preserve shell metacharacters).
func_quote_for_eval "$file"
args="$args $func_quote_for_eval_result"
done
if test "X$opt_dry_run" = Xfalse; then
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
fi
# Restore saved environment variables
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${save_$lt_var+set}\" = set; then
$lt_var=\$save_$lt_var; export $lt_var
else
$lt_unset $lt_var
fi"
done
# Now prepare to actually exec the command.
exec_cmd="\$cmd$args"
else
# Display what would be done.
if test -n "$shlibpath_var"; then
eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
$ECHO "export $shlibpath_var"
fi
$ECHO "$cmd$args"
exit $EXIT_SUCCESS
fi
}
test "$mode" = execute && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
$opt_debug
libdirs="$nonopt"
admincmds=
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
for dir
do
libdirs="$libdirs $dir"
done
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
'"$cmd"'"'
fi
if test -n "$finish_eval"; then
# Do the single finish_eval.
eval cmds=\"$finish_eval\"
$opt_dry_run || eval "$cmds" || admincmds="$admincmds
$cmds"
fi
done
fi
# Exit here if they wanted silent mode.
$opt_silent && exit $EXIT_SUCCESS
$ECHO "X----------------------------------------------------------------------" | $Xsed
$ECHO "Libraries have been installed in:"
for libdir in $libdirs; do
$ECHO " $libdir"
done
$ECHO
$ECHO "If you ever happen to want to link against installed libraries"
$ECHO "in a given directory, LIBDIR, you must either use libtool, and"
$ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
$ECHO "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
$ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
$ECHO " during execution"
fi
if test -n "$runpath_var"; then
$ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
$ECHO " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
$ECHO " - use the \`$flag' linker flag"
fi
if test -n "$admincmds"; then
$ECHO " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
$ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
fi
$ECHO
$ECHO "See any operating system documentation about shared libraries for"
case $host in
solaris2.[6789]|solaris2.1[0-9])
$ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
$ECHO "pages."
;;
*)
$ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
;;
esac
$ECHO "X----------------------------------------------------------------------" | $Xsed
exit $EXIT_SUCCESS
}
test "$mode" = finish && func_mode_finish ${1+"$@"}
# func_mode_install arg...
func_mode_install ()
{
$opt_debug
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
$ECHO "X$nonopt" | $GREP shtool >/dev/null; then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
arg=$1
shift
else
install_prog=
arg=$nonopt
fi
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
func_quote_for_eval "$arg"
install_prog="$install_prog$func_quote_for_eval_result"
# We need to accept at least all the BSD install flags.
dest=
files=
opts=
prev=
install_type=
isdir=no
stripme=
for arg
do
if test -n "$dest"; then
files="$files $dest"
dest=$arg
continue
fi
case $arg in
-d) isdir=yes ;;
-f)
case " $install_prog " in
*[\\\ /]cp\ *) ;;
*) prev=$arg ;;
esac
;;
-g | -m | -o)
prev=$arg
;;
-s)
stripme=" -s"
continue
;;
-*)
;;
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
prev=
else
dest=$arg
continue
fi
;;
esac
# Aesthetically quote the argument.
func_quote_for_eval "$arg"
install_prog="$install_prog $func_quote_for_eval_result"
done
test -z "$install_prog" && \
func_fatal_help "you must specify an install program"
test -n "$prev" && \
func_fatal_help "the \`$prev' option requires an argument"
if test -z "$files"; then
if test -z "$dest"; then
func_fatal_help "no file or destination specified"
else
func_fatal_help "you must specify a destination"
fi
fi
# Strip any trailing slash from the destination.
func_stripname '' '/' "$dest"
dest=$func_stripname_result
# Check to see that the destination is a directory.
test -d "$dest" && isdir=yes
if test "$isdir" = yes; then
destdir="$dest"
destname=
else
func_dirname_and_basename "$dest" "" "."
destdir="$func_dirname_result"
destname="$func_basename_result"
# Not a directory, so check to see that there is only one file specified.
set dummy $files; shift
test "$#" -gt 1 && \
func_fatal_help "\`$dest' is not a directory"
fi
case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
for file in $files; do
case $file in
*.lo) ;;
*)
func_fatal_help "\`$destdir' must be an absolute directory name"
;;
esac
done
;;
esac
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
libtool_install_magic="$magic"
staticlibs=
future_libdirs=
current_libdirs=
for file in $files; do
# Do each installation.
case $file in
*.$libext)
# Do the static libraries later.
staticlibs="$staticlibs $file"
;;
*.la)
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "\`$file' is not a valid libtool archive"
library_names=
old_library=
relink_command=
func_source "$file"
# Add the libdir to current_libdirs if it is the destination.
if test "X$destdir" = "X$libdir"; then
case "$current_libdirs " in
*" $libdir "*) ;;
*) current_libdirs="$current_libdirs $libdir" ;;
esac
else
# Note the libdir as a future libdir.
case "$future_libdirs " in
*" $libdir "*) ;;
*) future_libdirs="$future_libdirs $libdir" ;;
esac
fi
func_dirname "$file" "/" ""
dir="$func_dirname_result"
dir="$dir$objdir"
if test -n "$relink_command"; then
# Determine the prefix the user has applied to our future dir.
inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
# Don't allow the user to place us outside of our expected
# location b/c this prevents finding dependent libraries that
# are installed to the same prefix.
# At present, this check doesn't affect windows .dll's that
# are installed into $libdir/../bin (currently, that works fine)
# but it's something to keep an eye on.
test "$inst_prefix_dir" = "$destdir" && \
func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
else
relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
fi
func_warning "relinking \`$file'"
func_show_eval "$relink_command" \
'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
fi
# See the names of the shared library.
set dummy $library_names; shift
if test -n "$1"; then
realname="$1"
shift
srcname="$realname"
test -n "$relink_command" && srcname="$realname"T
# Install the shared library and build the symlinks.
func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
'exit $?'
tstripme="$stripme"
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
case $realname in
*.dll.a)
tstripme=""
;;
esac
;;
esac
if test -n "$tstripme" && test -n "$striplib"; then
func_show_eval "$striplib $destdir/$realname" 'exit $?'
fi
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
# Try `ln -sf' first, because the `ln' binary might depend on
# the symlink we replace! Solaris /bin/ln does not understand -f,
# so we also need to try rm && ln -s.
for linkname
do
test "$linkname" != "$realname" \
&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
done
fi
# Do each command in the postinstall commands.
lib="$destdir/$realname"
func_execute_cmds "$postinstall_cmds" 'exit $?'
fi
# Install the pseudo-library for information purposes.
func_basename "$file"
name="$func_basename_result"
instname="$dir/$name"i
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
;;
*.lo)
# Install (i.e. copy) a libtool object.
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
destfile="$destdir/$destname"
else
func_basename "$file"
destfile="$func_basename_result"
destfile="$destdir/$destfile"
fi
# Deduce the name of the destination old-style object file.
case $destfile in
*.lo)
func_lo2o "$destfile"
staticdest=$func_lo2o_result
;;
*.$objext)
staticdest="$destfile"
destfile=
;;
*)
func_fatal_help "cannot copy a libtool object to \`$destfile'"
;;
esac
# Install the libtool object if requested.
test -n "$destfile" && \
func_show_eval "$install_prog $file $destfile" 'exit $?'
# Install the old object if enabled.
if test "$build_old_libs" = yes; then
# Deduce the name of the old-style object file.
func_lo2o "$file"
staticobj=$func_lo2o_result
func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
fi
exit $EXIT_SUCCESS
;;
*)
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
destfile="$destdir/$destname"
else
func_basename "$file"
destfile="$func_basename_result"
destfile="$destdir/$destfile"
fi
# If the file is missing, and there is a .exe on the end, strip it
# because it is most likely a libtool script we actually want to
# install
stripped_ext=""
case $file in
*.exe)
if test ! -f "$file"; then
func_stripname '' '.exe' "$file"
file=$func_stripname_result
stripped_ext=".exe"
fi
;;
esac
# Do a test to see if this is really a libtool program.
case $host in
*cygwin* | *mingw*)
if func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
wrapper=$func_ltwrapper_scriptname_result
else
func_stripname '' '.exe' "$file"
wrapper=$func_stripname_result
fi
;;
*)
wrapper=$file
;;
esac
if func_ltwrapper_script_p "$wrapper"; then
notinst_deplibs=
relink_command=
func_source "$wrapper"
# Check the variables that should have been set.
test -z "$generated_by_libtool_version" && \
func_fatal_error "invalid libtool wrapper script \`$wrapper'"
finalize=yes
for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
func_source "$lib"
fi
libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
if test -n "$libdir" && test ! -f "$libfile"; then
func_warning "\`$lib' has not been installed in \`$libdir'"
finalize=no
fi
done
relink_command=
func_source "$wrapper"
outputname=
if test "$fast_install" = no && test -n "$relink_command"; then
$opt_dry_run || {
if test "$finalize" = yes; then
tmpdir=`func_mktempdir`
func_basename "$file$stripped_ext"
file="$func_basename_result"
outputname="$tmpdir/$file"
# Replace the output file specification.
relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
$opt_silent || {
func_quote_for_expand "$relink_command"
eval "func_echo $func_quote_for_expand_result"
}
if eval "$relink_command"; then :
else
func_error "error: relink \`$file' with the above command before installing it"
$opt_dry_run || ${RM}r "$tmpdir"
continue
fi
file="$outputname"
else
func_warning "cannot relink \`$file'"
fi
}
else
# Install the binary that we compiled earlier.
file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
fi
fi
# remove .exe since cygwin /usr/bin/install will append another
# one anyway
case $install_prog,$host in
*/usr/bin/install*,*cygwin*)
case $file:$destfile in
*.exe:*.exe)
# this is ok
;;
*.exe:*)
destfile=$destfile.exe
;;
*:*.exe)
func_stripname '' '.exe' "$destfile"
destfile=$func_stripname_result
;;
esac
;;
esac
func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
$opt_dry_run || if test -n "$outputname"; then
${RM}r "$tmpdir"
fi
;;
esac
done
for file in $staticlibs; do
func_basename "$file"
name="$func_basename_result"
# Set up the ranlib parameters.
oldlib="$destdir/$name"
func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
if test -n "$stripme" && test -n "$old_striplib"; then
func_show_eval "$old_striplib $oldlib" 'exit $?'
fi
# Do each command in the postinstall commands.
func_execute_cmds "$old_postinstall_cmds" 'exit $?'
done
test -n "$future_libdirs" && \
func_warning "remember to run \`$progname --finish$future_libdirs'"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
$opt_dry_run && current_libdirs=" -n$current_libdirs"
exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
}
test "$mode" = install && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
# Extract symbols from dlprefiles and create ${outputname}S.o with
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
$opt_debug
my_outputname="$1"
my_originator="$2"
my_pic_p="${3-no}"
my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
my_dlsyms=
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
my_dlsyms="${my_outputname}S.c"
else
func_error "not configured to extract global symbols from dlpreopened files"
fi
fi
if test -n "$my_dlsyms"; then
case $my_dlsyms in
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
nlist="$output_objdir/${my_outputname}.nm"
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
# Parse the name list into a source file.
func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
#ifdef __cplusplus
extern \"C\" {
#endif
/* External symbol declarations for the compiler. */\
"
if test "$dlself" = yes; then
func_verbose "generating symbol list for \`$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
for progfile in $progfiles; do
func_verbose "extracting global C symbols from \`$progfile'"
$opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
done
if test -n "$exclude_expsyms"; then
$opt_dry_run || {
eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
}
fi
if test -n "$export_symbols_regex"; then
$opt_dry_run || {
eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
}
fi
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
export_symbols="$output_objdir/$outputname.exp"
$opt_dry_run || {
$RM $export_symbols
eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
;;
esac
}
else
$opt_dry_run || {
eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
*cygwin | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
;;
esac
}
fi
fi
for dlprefile in $dlprefiles; do
func_verbose "extracting global C symbols from \`$dlprefile'"
func_basename "$dlprefile"
name="$func_basename_result"
$opt_dry_run || {
eval '$ECHO ": $name " >> "$nlist"'
eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
}
done
$opt_dry_run || {
# Make sure we have at least an empty file.
test -f "$nlist" || : > "$nlist"
if test -n "$exclude_expsyms"; then
$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
$MV "$nlist"T "$nlist"
fi
# Try sorting and uniquifying the output.
if $GREP -v "^: " < "$nlist" |
if sort -k 3 </dev/null >/dev/null 2>&1; then
sort -k 3
else
sort +2
fi |
uniq > "$nlist"S; then
:
else
$GREP -v "^: " < "$nlist" > "$nlist"S
fi
if test -f "$nlist"S; then
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
else
$ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
$ECHO >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
typedef struct {
const char *name;
void *address;
} lt_dlsymlist;
"
case $host in
*cygwin* | *mingw* | *cegcc* )
$ECHO >> "$output_objdir/$my_dlsyms" "\
/* DATA imports from DLLs on WIN32 con't be const, because
runtime relocations are performed -- see ld's documentation
on pseudo-relocs. */"
lt_dlsym_const= ;;
*osf5*)
echo >> "$output_objdir/$my_dlsyms" "\
/* This system does not cope well with relocations in const data */"
lt_dlsym_const= ;;
*)
lt_dlsym_const=const ;;
esac
$ECHO >> "$output_objdir/$my_dlsyms" "\
extern $lt_dlsym_const lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[];
$lt_dlsym_const lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
{\
{ \"$my_originator\", (void *) 0 },"
case $need_lib_prefix in
no)
eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
;;
*)
eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
;;
esac
$ECHO >> "$output_objdir/$my_dlsyms" "\
{0, (void *) 0}
};
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
return lt_${my_prefix}_LTX_preloaded_symbols;
}
#endif
#ifdef __cplusplus
}
#endif\
"
} # !$opt_dry_run
pic_flag_for_symtable=
case "$compile_command " in
*" -static "*) ;;
*)
case $host in
# compiling the symbol table file with pic_flag works around
# a FreeBSD bug that causes programs to crash when -lm is
# linked before any other PIC object. But we must not use
# pic_flag when linking with -static. The problem exists in
# FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
*-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
*-*-hpux*)
pic_flag_for_symtable=" $pic_flag" ;;
*)
if test "X$my_pic_p" != Xno; then
pic_flag_for_symtable=" $pic_flag"
fi
;;
esac
;;
esac
symtab_cflags=
for arg in $LTCFLAGS; do
case $arg in
-pie | -fpie | -fPIE) ;;
*) symtab_cflags="$symtab_cflags $arg" ;;
esac
done
# Now compile the dynamic symbol file.
func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
# Clean up the generated files.
func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
# Transform the symbol file into the correct name.
symfileobj="$output_objdir/${my_outputname}S.$objext"
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
else
compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
fi
;;
*)
compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
;;
esac
;;
*)
func_fatal_error "unknown suffix for \`$my_dlsyms'"
;;
esac
else
# We keep going just in case the user didn't refer to
# lt_preloaded_symbols. The linker will fail if global_symbol_pipe
# really was required.
# Nullify the symbol file.
compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
fi
}
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
func_win32_libid ()
{
$opt_debug
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
win32_libid_type="x86 archive import"
;;
*ar\ archive*) # could be an import, or static
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
$EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 |
$SED -n -e '
1,100{
/ I /{
s,.*,import,
p
q
}
}'`
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
esac
fi
;;
*DLL*)
win32_libid_type="x86 DLL"
;;
*executable*) # but shell scripts are "executable" too...
case $win32_fileres in
*MS\ Windows\ PE\ Intel*)
win32_libid_type="x86 DLL"
;;
esac
;;
esac
$ECHO "$win32_libid_type"
}
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
$opt_debug
f_ex_an_ar_dir="$1"; shift
f_ex_an_ar_oldlib="$1"
func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
:
else
func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
fi
}
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
$opt_debug
my_gentop="$1"; shift
my_oldlibs=${1+"$@"}
my_oldobjs=""
my_xlib=""
my_xabs=""
my_xdir=""
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
func_basename "$my_xlib"
my_xlib="$func_basename_result"
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
*" $my_xlib_u "*)
func_arith $extracted_serial + 1
extracted_serial=$func_arith_result
my_xlib_u=lt$extracted_serial-$my_xlib ;;
*) break ;;
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
my_xdir="$my_gentop/$my_xlib_u"
func_mkdir_p "$my_xdir"
case $host in
*-darwin*)
func_verbose "Extracting $my_xabs"
# Do not bother doing anything if just a dry run
$opt_dry_run || {
darwin_orig_dir=`pwd`
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
darwin_base_archive=`basename "$darwin_archive"`
darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
for darwin_arch in $darwin_arches ; do
func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
$LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
func_extract_an_archive "`pwd`" "${darwin_base_archive}"
cd "$darwin_curdir"
$RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
done # $darwin_arches
## Okay now we've a bunch of thin objects, gotta fatten them up :)
darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
$LIPO -create -output "$darwin_file" $darwin_files
done # $darwin_filelist
$RM -rf unfat-$$
cd "$darwin_orig_dir"
else
cd $darwin_orig_dir
func_extract_an_archive "$my_xdir" "$my_xabs"
fi # $darwin_arches
} # !$opt_dry_run
;;
*)
func_extract_an_archive "$my_xdir" "$my_xabs"
;;
esac
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
done
func_extract_archives_result="$my_oldobjs"
}
# func_emit_wrapper_part1 [arg=no]
#
# Emit the first part of a libtool wrapper script on stdout.
# For more information, see the description associated with
# func_emit_wrapper(), below.
func_emit_wrapper_part1 ()
{
func_emit_wrapper_part1_arg1=no
if test -n "$1" ; then
func_emit_wrapper_part1_arg1=$1
fi
$ECHO "\
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
#
# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
# Be Bourne compatible
if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
# is contrary to our usage. Disable this feature.
alias -g '\${1+\"\$@\"}'='\"\$@\"'
setopt NO_GLOB_SUBST
else
case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
relink_command=\"$relink_command\"
# This environment variable determines our operation mode.
if test \"\$libtool_install_magic\" = \"$magic\"; then
# install mode needs the following variables:
generated_by_libtool_version='$macro_version'
notinst_deplibs='$notinst_deplibs'
else
# When we are sourced in execute mode, \$file and \$ECHO are already set.
if test \"\$libtool_execute_magic\" != \"$magic\"; then
ECHO=\"$qecho\"
file=\"\$0\"
# Make sure echo works.
if test \"X\$1\" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
# Yippee, \$ECHO works!
:
else
# Restart under the correct shell, and then maybe \$ECHO will work.
exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
fi
fi\
"
$ECHO "\
# Find the directory that this script lives in.
thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
# Follow symbolic links until we get to the real thisdir.
file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
while test -n \"\$file\"; do
destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
case \"\$destdir\" in
[\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
*) thisdir=\"\$thisdir/\$destdir\" ;;
esac
fi
file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
done
"
}
# end: func_emit_wrapper_part1
# func_emit_wrapper_part2 [arg=no]
#
# Emit the second part of a libtool wrapper script on stdout.
# For more information, see the description associated with
# func_emit_wrapper(), below.
func_emit_wrapper_part2 ()
{
func_emit_wrapper_part2_arg1=no
if test -n "$1" ; then
func_emit_wrapper_part2_arg1=$1
fi
$ECHO "\
# Usually 'no', except on cygwin/mingw when embedded into
# the cwrapper.
WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
# special case for '.'
if test \"\$thisdir\" = \".\"; then
thisdir=\`pwd\`
fi
# remove .libs from thisdir
case \"\$thisdir\" in
*[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
$objdir ) thisdir=. ;;
esac
fi
# Try to get the absolute directory name.
absdir=\`cd \"\$thisdir\" && pwd\`
test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
if test "$fast_install" = yes; then
$ECHO "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" ||
{ file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
if test ! -d \"\$progdir\"; then
$MKDIR \"\$progdir\"
else
$RM \"\$progdir/\$file\"
fi"
$ECHO "\
# relink executable if necessary
if test -n \"\$relink_command\"; then
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
$ECHO \"\$relink_command_output\" >&2
$RM \"\$progdir/\$file\"
exit 1
fi
fi
$MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
{ $RM \"\$progdir/\$program\";
$MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
$RM \"\$progdir/\$file\"
fi"
else
$ECHO "\
program='$outputname'
progdir=\"\$thisdir/$objdir\"
"
fi
$ECHO "\
if test -f \"\$progdir/\$program\"; then"
# Export our shlibpath_var if we have one.
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
# Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
# Some systems cannot cope with colon-terminated $shlibpath_var
# The second colon is a workaround for a bug in BeOS R4 sed
$shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
export $shlibpath_var
"
fi
# fixup the dll searchpath if we need to.
if test -n "$dllsearchpath"; then
$ECHO "\
# Add the dll search path components to the executable PATH
PATH=$dllsearchpath:\$PATH
"
fi
$ECHO "\
if test \"\$libtool_execute_magic\" != \"$magic\"; then
# Run the actual program with our arguments.
"
case $host in
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2* | *-cegcc*)
$ECHO "\
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
;;
*)
$ECHO "\
exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
;;
esac
$ECHO "\
\$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
exit 1
fi
else
# The program doesn't exist.
\$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
fi
fi\
"
}
# end: func_emit_wrapper_part2
# func_emit_wrapper [arg=no]
#
# Emit a libtool wrapper script on stdout.
# Don't directly open a file because we may want to
# incorporate the script contents within a cygwin/mingw
# wrapper executable. Must ONLY be called from within
# func_mode_link because it depends on a number of variables
# set therein.
#
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
# variable will take. If 'yes', then the emitted script
# will assume that the directory in which it is stored is
# the $objdir directory. This is a cygwin/mingw-specific
# behavior.
func_emit_wrapper ()
{
func_emit_wrapper_arg1=no
if test -n "$1" ; then
func_emit_wrapper_arg1=$1
fi
# split this up so that func_emit_cwrapperexe_src
# can call each part independently.
func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
}
# func_to_host_path arg
#
# Convert paths to host format when used with build tools.
# Intended for use with "native" mingw (where libtool itself
# is running under the msys shell), or in the following cross-
# build environments:
# $build $host
# mingw (msys) mingw [e.g. native]
# cygwin mingw
# *nix + wine mingw
# where wine is equipped with the `winepath' executable.
# In the native mingw case, the (msys) shell automatically
# converts paths for any non-msys applications it launches,
# but that facility isn't available from inside the cwrapper.
# Similar accommodations are necessary for $host mingw and
# $build cygwin. Calling this function does no harm for other
# $host/$build combinations not listed above.
#
# ARG is the path (on $build) that should be converted to
# the proper representation for $host. The result is stored
# in $func_to_host_path_result.
func_to_host_path ()
{
func_to_host_path_result="$1"
if test -n "$1" ; then
case $host in
*mingw* )
lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
case $build in
*mingw* ) # actually, msys
# awkward: cmd appends spaces to result
lt_sed_strip_trailing_spaces="s/[ ]*\$//"
func_to_host_path_tmp1=`( cmd //c echo "$1" |\
$SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
$SED -e "$lt_sed_naive_backslashify"`
;;
*cygwin* )
func_to_host_path_tmp1=`cygpath -w "$1"`
func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
$SED -e "$lt_sed_naive_backslashify"`
;;
* )
# Unfortunately, winepath does not exit with a non-zero
# error code, so we are forced to check the contents of
# stdout. On the other hand, if the command is not
# found, the shell will set an exit code of 127 and print
# *an error message* to stdout. So we must check for both
# error code of zero AND non-empty stdout, which explains
# the odd construction:
func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
$SED -e "$lt_sed_naive_backslashify"`
else
# Allow warning below.
func_to_host_path_result=""
fi
;;
esac
if test -z "$func_to_host_path_result" ; then
func_error "Could not determine host path corresponding to"
func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback:
func_to_host_path_result="$1"
fi
;;
esac
fi
}
# end: func_to_host_path
# func_to_host_pathlist arg
#
# Convert pathlists to host format when used with build tools.
# See func_to_host_path(), above. This function supports the
# following $build/$host combinations (but does no harm for
# combinations not listed here):
# $build $host
# mingw (msys) mingw [e.g. native]
# cygwin mingw
# *nix + wine mingw
#
# Path separators are also converted from $build format to
# $host format. If ARG begins or ends with a path separator
# character, it is preserved (but converted to $host format)
# on output.
#
# ARG is a pathlist (on $build) that should be converted to
# the proper representation on $host. The result is stored
# in $func_to_host_pathlist_result.
func_to_host_pathlist ()
{
func_to_host_pathlist_result="$1"
if test -n "$1" ; then
case $host in
*mingw* )
lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
# Remove leading and trailing path separator characters from
# ARG. msys behavior is inconsistent here, cygpath turns them
# into '.;' and ';.', and winepath ignores them completely.
func_to_host_pathlist_tmp2="$1"
# Once set for this call, this variable should not be
# reassigned. It is used in tha fallback case.
func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
$SED -e 's|^:*||' -e 's|:*$||'`
case $build in
*mingw* ) # Actually, msys.
# Awkward: cmd appends spaces to result.
lt_sed_strip_trailing_spaces="s/[ ]*\$//"
func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
$SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
$SED -e "$lt_sed_naive_backslashify"`
;;
*cygwin* )
func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
$SED -e "$lt_sed_naive_backslashify"`
;;
* )
# unfortunately, winepath doesn't convert pathlists
func_to_host_pathlist_result=""
func_to_host_pathlist_oldIFS=$IFS
IFS=:
for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
IFS=$func_to_host_pathlist_oldIFS
if test -n "$func_to_host_pathlist_f" ; then
func_to_host_path "$func_to_host_pathlist_f"
if test -n "$func_to_host_path_result" ; then
if test -z "$func_to_host_pathlist_result" ; then
func_to_host_pathlist_result="$func_to_host_path_result"
else
func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
fi
fi
fi
IFS=:
done
IFS=$func_to_host_pathlist_oldIFS
;;
esac
if test -z "$func_to_host_pathlist_result" ; then
func_error "Could not determine the host path(s) corresponding to"
func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback. This may break if $1 contains DOS-style drive
# specifications. The fix is not to complicate the expression
# below, but for the user to provide a working wine installation
# with winepath so that path translation in the cross-to-mingw
# case works properly.
lt_replace_pathsep_nix_to_dos="s|:|;|g"
func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
$SED -e "$lt_replace_pathsep_nix_to_dos"`
fi
# Now, add the leading and trailing path separators back
case "$1" in
:* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
;;
esac
case "$1" in
*: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
;;
esac
;;
esac
fi
}
# end: func_to_host_pathlist
# func_emit_cwrapperexe_src
# emit the source code for a wrapper executable on stdout
# Must ONLY be called from within func_mode_link because
# it depends on a number of variable set therein.
func_emit_cwrapperexe_src ()
{
cat <<EOF
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
The $output program cannot be directly executed until all the libtool
libraries that it depends on are installed.
This wrapper executable should never be moved out of the build directory.
If it is, it will not operate correctly.
Currently, it simply execs the wrapper *script* "$SHELL $output",
but could eventually absorb all of the scripts functionality and
exec $objdir/$outputname directly.
*/
EOF
cat <<"EOF"
#include <stdio.h>
#include <stdlib.h>
#ifdef _MSC_VER
# include <direct.h>
# include <process.h>
# include <io.h>
# define setmode _setmode
#else
# include <unistd.h>
# include <stdint.h>
# ifdef __CYGWIN__
# include <io.h>
# define HAVE_SETENV
# ifdef __STRICT_ANSI__
char *realpath (const char *, char *);
int putenv (char *);
int setenv (const char *, const char *, int);
# endif
# endif
#endif
#include <malloc.h>
#include <stdarg.h>
#include <assert.h>
#include <string.h>
#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/stat.h>
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
#elif defined(MAXPATHLEN)
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
#endif
#ifndef S_IXOTH
# define S_IXOTH 0
#endif
#ifndef S_IXGRP
# define S_IXGRP 0
#endif
#ifdef _MSC_VER
# define S_IXUSR _S_IEXEC
# define stat _stat
# ifndef _INTPTR_T_DEFINED
# define intptr_t int
# endif
#endif
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
#endif
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
defined (__OS2__)
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
# define DIR_SEPARATOR_2 '\\'
# endif
# ifndef PATH_SEPARATOR_2
# define PATH_SEPARATOR_2 ';'
# endif
#endif
#ifndef DIR_SEPARATOR_2
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
#else /* DIR_SEPARATOR_2 */
# define IS_DIR_SEPARATOR(ch) \
(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */
#ifndef PATH_SEPARATOR_2
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
#else /* PATH_SEPARATOR_2 */
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
#endif /* PATH_SEPARATOR_2 */
#ifdef __CYGWIN__
# define FOPEN_WB "wb"
#endif
#ifndef FOPEN_WB
# define FOPEN_WB "w"
#endif
#ifndef _O_BINARY
# define _O_BINARY 0
#endif
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
#undef LTWRAPPER_DEBUGPRINTF
#if defined DEBUGWRAPPER
# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
static void
ltwrapper_debugprintf (const char *fmt, ...)
{
va_list args;
va_start (args, fmt);
(void) vfprintf (stderr, fmt, args);
va_end (args);
}
#else
# define LTWRAPPER_DEBUGPRINTF(args)
#endif
const char *program_name = NULL;
void *xmalloc (size_t num);
char *xstrdup (const char *string);
const char *base_name (const char *name);
char *find_executable (const char *wrapper);
char *chase_symlinks (const char *pathspec);
int make_executable (const char *path);
int check_executable (const char *path);
char *strendzap (char *str, const char *pat);
void lt_fatal (const char *message, ...);
void lt_setenv (const char *name, const char *value);
char *lt_extend_str (const char *orig_value, const char *add, int to_end);
void lt_opt_process_env_set (const char *arg);
void lt_opt_process_env_prepend (const char *arg);
void lt_opt_process_env_append (const char *arg);
int lt_split_name_value (const char *arg, char** name, char** value);
void lt_update_exe_path (const char *name, const char *value);
void lt_update_lib_path (const char *name, const char *value);
static const char *script_text_part1 =
EOF
func_emit_wrapper_part1 yes |
$SED -e 's/\([\\"]\)/\\\1/g' \
-e 's/^/ "/' -e 's/$/\\n"/'
echo ";"
cat <<EOF
static const char *script_text_part2 =
EOF
func_emit_wrapper_part2 yes |
$SED -e 's/\([\\"]\)/\\\1/g' \
-e 's/^/ "/' -e 's/$/\\n"/'
echo ";"
cat <<EOF
const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
func_to_host_pathlist "$temp_rpath"
cat <<EOF
const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
EOF
else
cat <<"EOF"
const char * LIB_PATH_VALUE = "";
EOF
fi
if test -n "$dllsearchpath"; then
func_to_host_pathlist "$dllsearchpath:"
cat <<EOF
const char * EXE_PATH_VARNAME = "PATH";
const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
EOF
else
cat <<"EOF"
const char * EXE_PATH_VARNAME = "";
const char * EXE_PATH_VALUE = "";
EOF
fi
if test "$fast_install" = yes; then
cat <<EOF
const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
EOF
else
cat <<EOF
const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
EOF
fi
cat <<"EOF"
#define LTWRAPPER_OPTION_PREFIX "--lt-"
#define LTWRAPPER_OPTION_PREFIX_LENGTH 5
static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set";
/* argument is putenv-style "foo=bar", value of foo is set to bar */
static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend";
/* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append";
/* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
int
main (int argc, char *argv[])
{
char **newargz;
int newargc;
char *tmp_pathspec;
char *actual_cwrapper_path;
char *actual_cwrapper_name;
char *target_name;
char *lt_argv_zero;
intptr_t rval = 127;
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
/* very simple arg parsing; don't want to rely on getopt */
for (i = 1; i < argc; i++)
{
if (strcmp (argv[i], dumpscript_opt) == 0)
{
EOF
case "$host" in
*mingw* | *cygwin* )
# make stdout use "unix" line endings
echo " setmode(1,_O_BINARY);"
;;
esac
cat <<"EOF"
printf ("%s", script_text_part1);
printf ("%s", script_text_part2);
return 0;
}
}
newargz = XMALLOC (char *, argc + 1);
tmp_pathspec = find_executable (argv[0]);
if (tmp_pathspec == NULL)
lt_fatal ("Couldn't find %s", argv[0]);
LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
tmp_pathspec));
actual_cwrapper_path = chase_symlinks (tmp_pathspec);
LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
actual_cwrapper_path));
XFREE (tmp_pathspec);
actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
strendzap (actual_cwrapper_path, actual_cwrapper_name);
/* wrapper name transforms */
strendzap (actual_cwrapper_name, ".exe");
tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
XFREE (actual_cwrapper_name);
actual_cwrapper_name = tmp_pathspec;
tmp_pathspec = 0;
/* target_name transforms -- use actual target program name; might have lt- prefix */
target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
strendzap (target_name, ".exe");
tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
XFREE (target_name);
target_name = tmp_pathspec;
tmp_pathspec = 0;
LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
target_name));
EOF
cat <<EOF
newargz[0] =
XMALLOC (char, (strlen (actual_cwrapper_path) +
strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
strcpy (newargz[0], actual_cwrapper_path);
strcat (newargz[0], "$objdir");
strcat (newargz[0], "/");
EOF
cat <<"EOF"
/* stop here, and copy so we don't have to do this twice */
tmp_pathspec = xstrdup (newargz[0]);
/* do NOT want the lt- prefix here, so use actual_cwrapper_name */
strcat (newargz[0], actual_cwrapper_name);
/* DO want the lt- prefix here if it exists, so use target_name */
lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
XFREE (tmp_pathspec);
tmp_pathspec = NULL;
EOF
case $host_os in
mingw*)
cat <<"EOF"
{
char* p;
while ((p = strchr (newargz[0], '\\')) != NULL)
{
*p = '/';
}
while ((p = strchr (lt_argv_zero, '\\')) != NULL)
{
*p = '/';
}
}
EOF
;;
esac
cat <<"EOF"
XFREE (target_name);
XFREE (actual_cwrapper_path);
XFREE (actual_cwrapper_name);
lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
lt_setenv ("DUALCASE", "1"); /* for MSK sh */
lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
newargc=0;
for (i = 1; i < argc; i++)
{
if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
{
if (argv[i][env_set_opt_len] == '=')
{
const char *p = argv[i] + env_set_opt_len + 1;
lt_opt_process_env_set (p);
}
else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
{
lt_opt_process_env_set (argv[++i]); /* don't copy */
}
else
lt_fatal ("%s missing required argument", env_set_opt);
continue;
}
if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
{
if (argv[i][env_prepend_opt_len] == '=')
{
const char *p = argv[i] + env_prepend_opt_len + 1;
lt_opt_process_env_prepend (p);
}
else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
{
lt_opt_process_env_prepend (argv[++i]); /* don't copy */
}
else
lt_fatal ("%s missing required argument", env_prepend_opt);
continue;
}
if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
{
if (argv[i][env_append_opt_len] == '=')
{
const char *p = argv[i] + env_append_opt_len + 1;
lt_opt_process_env_append (p);
}
else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
{
lt_opt_process_env_append (argv[++i]); /* don't copy */
}
else
lt_fatal ("%s missing required argument", env_append_opt);
continue;
}
if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
{
/* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
namespace, but it is not one of the ones we know about and
have already dealt with, above (inluding dump-script), then
report an error. Otherwise, targets might begin to believe
they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
namespace. The first time any user complains about this, we'll
need to make LTWRAPPER_OPTION_PREFIX a configure-time option
or a configure.ac-settable value.
*/
lt_fatal ("Unrecognized option in %s namespace: '%s'",
ltwrapper_option_prefix, argv[i]);
}
/* otherwise ... */
newargz[++newargc] = xstrdup (argv[i]);
}
newargz[++newargc] = NULL;
LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
for (i = 0; i < newargc; i++)
{
LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
}
EOF
case $host_os in
mingw*)
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
return 127;
}
return rval;
EOF
;;
*)
cat <<"EOF"
execv (lt_argv_zero, newargz);
return rval; /* =127, but avoids unused variable warning */
EOF
;;
esac
cat <<"EOF"
}
void *
xmalloc (size_t num)
{
void *p = (void *) malloc (num);
if (!p)
lt_fatal ("Memory exhausted");
return p;
}
char *
xstrdup (const char *string)
{
return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
string) : NULL;
}
const char *
base_name (const char *name)
{
const char *base;
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
/* Skip over the disk name in MSDOS pathnames. */
if (isalpha ((unsigned char) name[0]) && name[1] == ':')
name += 2;
#endif
for (base = name; *name; name++)
if (IS_DIR_SEPARATOR (*name))
base = name + 1;
return base;
}
int
check_executable (const char *path)
{
struct stat st;
LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
path ? (*path ? path : "EMPTY!") : "NULL!"));
if ((!path) || (!*path))
return 0;
if ((stat (path, &st) >= 0)
&& (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
return 1;
else
return 0;
}
int
make_executable (const char *path)
{
int rval = 0;
struct stat st;
LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
path ? (*path ? path : "EMPTY!") : "NULL!"));
if ((!path) || (!*path))
return 0;
if (stat (path, &st) >= 0)
{
rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
}
return rval;
}
/* Searches for the full path of the wrapper. Returns
newly allocated full path name if found, NULL otherwise
Does not chase symlinks, even on platforms that support them.
*/
char *
find_executable (const char *wrapper)
{
int has_slash = 0;
const char *p;
const char *p_next;
/* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
int tmp_len;
char *concat_name;
LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
if ((wrapper == NULL) || (*wrapper == '\0'))
return NULL;
/* Absolute path? */
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
{
concat_name = xstrdup (wrapper);
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
}
else
{
#endif
if (IS_DIR_SEPARATOR (wrapper[0]))
{
concat_name = xstrdup (wrapper);
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
}
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
}
#endif
for (p = wrapper; *p; p++)
if (*p == '/')
{
has_slash = 1;
break;
}
if (!has_slash)
{
/* no slashes; search PATH */
const char *path = getenv ("PATH");
if (path != NULL)
{
for (p = path; *p; p = p_next)
{
const char *q;
size_t p_len;
for (q = p; *q; q++)
if (IS_PATH_SEPARATOR (*q))
break;
p_len = q - p;
p_next = (*q == '\0' ? q : q + 1);
if (p_len == 0)
{
/* empty path: current directory */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal ("getcwd failed");
tmp_len = strlen (tmp);
concat_name =
XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
concat_name[tmp_len] = '/';
strcpy (concat_name + tmp_len + 1, wrapper);
}
else
{
concat_name =
XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, p, p_len);
concat_name[p_len] = '/';
strcpy (concat_name + p_len + 1, wrapper);
}
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
}
}
/* not found in PATH; assume curdir */
}
/* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal ("getcwd failed");
tmp_len = strlen (tmp);
concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
concat_name[tmp_len] = '/';
strcpy (concat_name + tmp_len + 1, wrapper);
if (check_executable (concat_name))
return concat_name;
XFREE (concat_name);
return NULL;
}
char *
chase_symlinks (const char *pathspec)
{
#ifndef S_ISLNK
return xstrdup (pathspec);
#else
char buf[LT_PATHMAX];
struct stat s;
char *tmp_pathspec = xstrdup (pathspec);
char *p;
int has_symlinks = 0;
while (strlen (tmp_pathspec) && !has_symlinks)
{
LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
tmp_pathspec));
if (lstat (tmp_pathspec, &s) == 0)
{
if (S_ISLNK (s.st_mode) != 0)
{
has_symlinks = 1;
break;
}
/* search backwards for last DIR_SEPARATOR */
p = tmp_pathspec + strlen (tmp_pathspec) - 1;
while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
p--;
if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
{
/* no more DIR_SEPARATORS left */
break;
}
*p = '\0';
}
else
{
char *errstr = strerror (errno);
lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
}
}
XFREE (tmp_pathspec);
if (!has_symlinks)
{
return xstrdup (pathspec);
}
tmp_pathspec = realpath (pathspec, buf);
if (tmp_pathspec == 0)
{
lt_fatal ("Could not follow symlinks for %s", pathspec);
}
return xstrdup (tmp_pathspec);
#endif
}
char *
strendzap (char *str, const char *pat)
{
size_t len, patlen;
assert (str != NULL);
assert (pat != NULL);
len = strlen (str);
patlen = strlen (pat);
if (patlen <= len)
{
str += len - patlen;
if (strcmp (str, pat) == 0)
*str = '\0';
}
return str;
}
static void
lt_error_core (int exit_status, const char *mode,
const char *message, va_list ap)
{
fprintf (stderr, "%s: %s: ", program_name, mode);
vfprintf (stderr, message, ap);
fprintf (stderr, ".\n");
if (exit_status >= 0)
exit (exit_status);
}
void
lt_fatal (const char *message, ...)
{
va_list ap;
va_start (ap, message);
lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
va_end (ap);
}
void
lt_setenv (const char *name, const char *value)
{
LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
(name ? name : "<NULL>"),
(value ? value : "<NULL>")));
{
#ifdef HAVE_SETENV
/* always make a copy, for consistency with !HAVE_SETENV */
char *str = xstrdup (value);
setenv (name, str, 1);
#else
int len = strlen (name) + 1 + strlen (value) + 1;
char *str = XMALLOC (char, len);
sprintf (str, "%s=%s", name, value);
if (putenv (str) != EXIT_SUCCESS)
{
XFREE (str);
}
#endif
}
}
char *
lt_extend_str (const char *orig_value, const char *add, int to_end)
{
char *new_value;
if (orig_value && *orig_value)
{
int orig_value_len = strlen (orig_value);
int add_len = strlen (add);
new_value = XMALLOC (char, add_len + orig_value_len + 1);
if (to_end)
{
strcpy (new_value, orig_value);
strcpy (new_value + orig_value_len, add);
}
else
{
strcpy (new_value, add);
strcpy (new_value + add_len, orig_value);
}
}
else
{
new_value = xstrdup (add);
}
return new_value;
}
int
lt_split_name_value (const char *arg, char** name, char** value)
{
const char *p;
int len;
if (!arg || !*arg)
return 1;
p = strchr (arg, (int)'=');
if (!p)
return 1;
*value = xstrdup (++p);
len = strlen (arg) - strlen (*value);
*name = XMALLOC (char, len);
strncpy (*name, arg, len-1);
(*name)[len - 1] = '\0';
return 0;
}
void
lt_opt_process_env_set (const char *arg)
{
char *name = NULL;
char *value = NULL;
if (lt_split_name_value (arg, &name, &value) != 0)
{
XFREE (name);
XFREE (value);
lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
}
lt_setenv (name, value);
XFREE (name);
XFREE (value);
}
void
lt_opt_process_env_prepend (const char *arg)
{
char *name = NULL;
char *value = NULL;
char *new_value = NULL;
if (lt_split_name_value (arg, &name, &value) != 0)
{
XFREE (name);
XFREE (value);
lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
}
new_value = lt_extend_str (getenv (name), value, 0);
lt_setenv (name, new_value);
XFREE (new_value);
XFREE (name);
XFREE (value);
}
void
lt_opt_process_env_append (const char *arg)
{
char *name = NULL;
char *value = NULL;
char *new_value = NULL;
if (lt_split_name_value (arg, &name, &value) != 0)
{
XFREE (name);
XFREE (value);
lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
}
new_value = lt_extend_str (getenv (name), value, 1);
lt_setenv (name, new_value);
XFREE (new_value);
XFREE (name);
XFREE (value);
}
void
lt_update_exe_path (const char *name, const char *value)
{
LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
(name ? name : "<NULL>"),
(value ? value : "<NULL>")));
if (name && *name && value && *value)
{
char *new_value = lt_extend_str (getenv (name), value, 0);
/* some systems can't cope with a ':'-terminated path #' */
int len = strlen (new_value);
while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
{
new_value[len-1] = '\0';
}
lt_setenv (name, new_value);
XFREE (new_value);
}
}
void
lt_update_lib_path (const char *name, const char *value)
{
LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
(name ? name : "<NULL>"),
(value ? value : "<NULL>")));
if (name && *name && value && *value)
{
char *new_value = lt_extend_str (getenv (name), value, 0);
lt_setenv (name, new_value);
XFREE (new_value);
}
}
EOF
}
# end: func_emit_cwrapperexe_src
# func_mode_link arg...
func_mode_link ()
{
$opt_debug
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
# which system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
# to make a dll which has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
allow_undefined=yes
;;
*)
allow_undefined=yes
;;
esac
libtool_args=$nonopt
base_compile="$nonopt $@"
compile_command=$nonopt
finalize_command=$nonopt
compile_rpath=
finalize_rpath=
compile_shlibpath=
finalize_shlibpath=
convenience=
old_convenience=
deplibs=
old_deplibs=
compiler_flags=
linker_flags=
dllsearchpath=
lib_search_path=`pwd`
inst_prefix_dir=
new_inherited_linker_flags=
avoid_version=no
dlfiles=
dlprefiles=
dlself=no
export_dynamic=no
export_symbols=
export_symbols_regex=
generated=
libobjs=
ltlibs=
module=no
no_install=no
objs=
non_pic_objects=
precious_files_regex=
prefer_static_libs=no
preload=no
prev=
prevarg=
release=
rpath=
xrpath=
perm_rpath=
temp_rpath=
thread_safe=no
vinfo=
vinfo_number=no
weak_libs=
single_module="${wl}-single_module"
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
for arg
do
case $arg in
-shared)
test "$build_libtool_libs" != yes && \
func_fatal_configuration "can not build a shared library"
build_old_libs=no
break
;;
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
func_warning "complete static linking is impossible in this configuration"
fi
if test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
;;
-static)
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=built
;;
-static-libtool-libs)
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
;;
esac
build_libtool_libs=no
build_old_libs=yes
break
;;
esac
done
# See if our shared archives depend on static archives.
test -n "$old_archive_from_new_cmds" && build_old_libs=yes
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
arg="$1"
shift
func_quote_for_eval "$arg"
qarg=$func_quote_for_eval_unquoted_result
func_append libtool_args " $func_quote_for_eval_result"
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
case $prev in
output)
func_append compile_command " @OUTPUT@"
func_append finalize_command " @OUTPUT@"
;;
esac
case $prev in
dlfiles|dlprefiles)
if test "$preload" = no; then
# Add the symbol object into the linking commands.
func_append compile_command " @SYMFILE@"
func_append finalize_command " @SYMFILE@"
preload=yes
fi
case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
if test "$dlself" = no; then
dlself=needless
export_dynamic=yes
fi
prev=
continue
;;
self)
if test "$prev" = dlprefiles; then
dlself=yes
elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
dlself=yes
else
dlself=needless
export_dynamic=yes
fi
prev=
continue
;;
*)
if test "$prev" = dlfiles; then
dlfiles="$dlfiles $arg"
else
dlprefiles="$dlprefiles $arg"
fi
prev=
continue
;;
esac
;;
expsyms)
export_symbols="$arg"
test -f "$arg" \
|| func_fatal_error "symbol file \`$arg' does not exist"
prev=
continue
;;
expsyms_regex)
export_symbols_regex="$arg"
prev=
continue
;;
framework)
case $host in
*-*-darwin*)
case "$deplibs " in
*" $qarg.ltframework "*) ;;
*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
;;
esac
;;
esac
prev=
continue
;;
inst_prefix)
inst_prefix_dir="$arg"
prev=
continue
;;
objectlist)
if test -f "$arg"; then
save_arg=$arg
moreargs=
for fil in `cat "$save_arg"`
do
# moreargs="$moreargs $fil"
arg=$fil
# A libtool-controlled object.
# Check to see that this really is a libtool object.
if func_lalib_unsafe_p "$arg"; then
pic_object=
non_pic_object=
# Read the .lo file
func_source "$arg"
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
test "$pic_object" = none &&
test "$non_pic_object" = none; then
func_fatal_error "cannot find name of object for \`$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
xdir="$func_dirname_result"
if test "$pic_object" != none; then
# Prepend the subdirectory the object is found in.
pic_object="$xdir$pic_object"
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
dlfiles="$dlfiles $pic_object"
prev=
continue
else
# If libtool objects are unsupported, then we need to preload.
prev=dlprefiles
fi
fi
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
dlprefiles="$dlprefiles $pic_object"
prev=
fi
# A PIC object.
func_append libobjs " $pic_object"
arg="$pic_object"
fi
# Non-PIC object.
if test "$non_pic_object" != none; then
# Prepend the subdirectory the object is found in.
non_pic_object="$xdir$non_pic_object"
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
non_pic_object="$pic_object"
func_append non_pic_objects " $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
xdir="$func_dirname_result"
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
non_pic_object=$xdir$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
func_fatal_error "\`$arg' is not a valid libtool object"
fi
fi
done
else
func_fatal_error "link input file \`$arg' does not exist"
fi
arg=$save_arg
prev=
continue
;;
precious_regex)
precious_files_regex="$arg"
prev=
continue
;;
release)
release="-$arg"
prev=
continue
;;
rpath | xrpath)
# We need an absolute path.
case $arg in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
func_fatal_error "only absolute run-paths are allowed"
;;
esac
if test "$prev" = rpath; then
case "$rpath " in
*" $arg "*) ;;
*) rpath="$rpath $arg" ;;
esac
else
case "$xrpath " in
*" $arg "*) ;;
*) xrpath="$xrpath $arg" ;;
esac
fi
prev=
continue
;;
shrext)
shrext_cmds="$arg"
prev=
continue
;;
weak)
weak_libs="$weak_libs $arg"
prev=
continue
;;
xcclinker)
linker_flags="$linker_flags $qarg"
compiler_flags="$compiler_flags $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xcompiler)
compiler_flags="$compiler_flags $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xlinker)
linker_flags="$linker_flags $qarg"
compiler_flags="$compiler_flags $wl$qarg"
prev=
func_append compile_command " $wl$qarg"
func_append finalize_command " $wl$qarg"
continue
;;
*)
eval "$prev=\"\$arg\""
prev=
continue
;;
esac
fi # test -n "$prev"
prevarg="$arg"
case $arg in
-all-static)
if test -n "$link_static_flag"; then
# See comment for -static flag below, for more details.
func_append compile_command " $link_static_flag"
func_append finalize_command " $link_static_flag"
fi
continue
;;
-allow-undefined)
# FIXME: remove this flag sometime in the future.
func_fatal_error "\`-allow-undefined' must not be used because it is the default"
;;
-avoid-version)
avoid_version=yes
continue
;;
-dlopen)
prev=dlfiles
continue
;;
-dlpreopen)
prev=dlprefiles
continue
;;
-export-dynamic)
export_dynamic=yes
continue
;;
-export-symbols | -export-symbols-regex)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
func_fatal_error "more than one -exported-symbols argument is not allowed"
fi
if test "X$arg" = "X-export-symbols"; then
prev=expsyms
else
prev=expsyms_regex
fi
continue
;;
-framework)
prev=framework
continue
;;
-inst-prefix-dir)
prev=inst_prefix
continue
;;
# The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
# so, if we see these flags be careful not to treat them like -L
-L[A-Z][A-Z]*:*)
case $with_gcc/$host in
no/*-*-irix* | /*-*-irix*)
func_append compile_command " $arg"
func_append finalize_command " $arg"
;;
esac
continue
;;
-L*)
func_stripname '-L' '' "$arg"
dir=$func_stripname_result
if test -z "$dir"; then
if test "$#" -gt 0; then
func_fatal_error "require no space between \`-L' and \`$1'"
else
func_fatal_error "need path for \`-L' option"
fi
fi
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
absdir=`cd "$dir" && pwd`
test -z "$absdir" && \
func_fatal_error "cannot determine absolute directory name of \`$dir'"
dir="$absdir"
;;
esac
case "$deplibs " in
*" -L$dir "*) ;;
*)
deplibs="$deplibs -L$dir"
lib_search_path="$lib_search_path $dir"
;;
esac
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
::) dllsearchpath=$dir;;
*) dllsearchpath="$dllsearchpath:$dir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
*) dllsearchpath="$dllsearchpath:$testbindir";;
esac
;;
esac
continue
;;
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
# These systems don't actually have a C or math library (as such)
continue
;;
*-*-os2*)
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
deplibs="$deplibs System.ltframework"
continue
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
test "X$arg" = "X-lc" && continue
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
test "X$arg" = "X-lc" && continue
;;
esac
elif test "X$arg" = "X-lc_r"; then
case $host in
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
esac
fi
deplibs="$deplibs $arg"
continue
;;
-module)
module=yes
continue
;;
# Tru64 UNIX uses -model [arg] to determine the layout of C++
# classes, name mangling, and exception handling.
# Darwin uses the -arch flag to determine output architecture.
-model|-arch|-isysroot)
compiler_flags="$compiler_flags $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
prev=xcompiler
continue
;;
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
compiler_flags="$compiler_flags $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
case "$new_inherited_linker_flags " in
*" $arg "*) ;;
* ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
esac
continue
;;
-multi_module)
single_module="${wl}-multi_module"
continue
;;
-no-fast-install)
fast_install=no
continue
;;
-no-install)
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
func_warning "\`-no-install' is ignored for $host"
func_warning "assuming \`-no-fast-install' instead"
fast_install=no
;;
*) no_install=yes ;;
esac
continue
;;
-no-undefined)
allow_undefined=no
continue
;;
-objectlist)
prev=objectlist
continue
;;
-o) prev=output ;;
-precious-files-regex)
prev=precious_regex
continue
;;
-release)
prev=release
continue
;;
-rpath)
prev=rpath
continue
;;
-R)
prev=xrpath
continue
;;
-R*)
func_stripname '-R' '' "$arg"
dir=$func_stripname_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
func_fatal_error "only absolute run-paths are allowed"
;;
esac
case "$xrpath " in
*" $dir "*) ;;
*) xrpath="$xrpath $dir" ;;
esac
continue
;;
-shared)
# The effects of -shared are defined in a previous loop.
continue
;;
-shrext)
prev=shrext
continue
;;
-static | -static-libtool-libs)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
# didn't have a PIC flag, but the assumption that the effects
# would be equivalent was wrong. It would break on at least
# Digital Unix and AIX.
continue
;;
-thread-safe)
thread_safe=yes
continue
;;
-version-info)
prev=vinfo
continue
;;
-version-number)
prev=vinfo
vinfo_number=yes
continue
;;
-weak)
prev=weak
continue
;;
-Wc,*)
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
arg=
save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
arg="$arg $wl$func_quote_for_eval_result"
compiler_flags="$compiler_flags $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
-Wl,*)
func_stripname '-Wl,' '' "$arg"
args=$func_stripname_result
arg=
save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
arg="$arg $wl$func_quote_for_eval_result"
compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
linker_flags="$linker_flags $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
-Xcompiler)
prev=xcompiler
continue
;;
-Xlinker)
prev=xlinker
continue
;;
-XCClinker)
prev=xcclinker
continue
;;
# -msg_* for osf cc
-msg_*)
func_quote_for_eval "$arg"
arg="$func_quote_for_eval_result"
;;
# -64, -mips[0-9] enable 64-bit mode on the SGI compiler
# -r[0-9][0-9]* specifies the processor on the SGI compiler
# -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
# +DA*, +DD* enable 64-bit mode on the HP compiler
# -q* pass through compiler args for the IBM compiler
# -m*, -t[45]*, -txscale* pass through architecture-specific
# compiler args for GCC
# -F/path gives path to uninstalled frameworks, gcc on darwin
# -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
# @file GCC response files
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
func_quote_for_eval "$arg"
arg="$func_quote_for_eval_result"
func_append compile_command " $arg"
func_append finalize_command " $arg"
compiler_flags="$compiler_flags $arg"
continue
;;
# Some other compiler flag.
-* | +*)
func_quote_for_eval "$arg"
arg="$func_quote_for_eval_result"
;;
*.$objext)
# A standard object.
objs="$objs $arg"
;;
*.lo)
# A libtool-controlled object.
# Check to see that this really is a libtool object.
if func_lalib_unsafe_p "$arg"; then
pic_object=
non_pic_object=
# Read the .lo file
func_source "$arg"
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
test "$pic_object" = none &&
test "$non_pic_object" = none; then
func_fatal_error "cannot find name of object for \`$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
xdir="$func_dirname_result"
if test "$pic_object" != none; then
# Prepend the subdirectory the object is found in.
pic_object="$xdir$pic_object"
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
dlfiles="$dlfiles $pic_object"
prev=
continue
else
# If libtool objects are unsupported, then we need to preload.
prev=dlprefiles
fi
fi
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
dlprefiles="$dlprefiles $pic_object"
prev=
fi
# A PIC object.
func_append libobjs " $pic_object"
arg="$pic_object"
fi
# Non-PIC object.
if test "$non_pic_object" != none; then
# Prepend the subdirectory the object is found in.
non_pic_object="$xdir$non_pic_object"
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
non_pic_object="$pic_object"
func_append non_pic_objects " $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
xdir="$func_dirname_result"
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
non_pic_object=$xdir$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
func_fatal_error "\`$arg' is not a valid libtool object"
fi
fi
;;
*.$libext)
# An archive.
deplibs="$deplibs $arg"
old_deplibs="$old_deplibs $arg"
continue
;;
*.la)
# A libtool-controlled library.
if test "$prev" = dlfiles; then
# This library was specified with -dlopen.
dlfiles="$dlfiles $arg"
prev=
elif test "$prev" = dlprefiles; then
# The library was specified with -dlpreopen.
dlprefiles="$dlprefiles $arg"
prev=
else
deplibs="$deplibs $arg"
fi
continue
;;
# Some other compiler argument.
*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
func_quote_for_eval "$arg"
arg="$func_quote_for_eval_result"
;;
esac # arg
# Now actually substitute the argument into the commands.
if test -n "$arg"; then
func_append compile_command " $arg"
func_append finalize_command " $arg"
fi
done # argument parsing loop
test -n "$prev" && \
func_fatal_help "the \`$prevarg' option requires an argument"
if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
func_append compile_command " $arg"
func_append finalize_command " $arg"
fi
oldlibs=
# calculate the name of the file, without its directory
func_basename "$output"
outputname="$func_basename_result"
libobjs_save="$libobjs"
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
else
shlib_search_path=
fi
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
func_dirname "$output" "/" ""
output_objdir="$func_dirname_result$objdir"
# Create the object directory.
func_mkdir_p "$output_objdir"
# Determine the type of output
case $output in
"")
func_fatal_help "you must specify an output file"
;;
*.$libext) linkmode=oldlib ;;
*.lo | *.$objext) linkmode=obj ;;
*.la) linkmode=lib ;;
*) linkmode=prog ;; # Anything else should be a program.
esac
specialdeplibs=
libs=
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
if $opt_duplicate_deps ; then
case "$libs " in
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
libs="$libs $deplib"
done
if test "$linkmode" = lib; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
# $postdeps and mark them as special (i.e., whose duplicates are
# not to be eliminated).
pre_post_deps=
if $opt_duplicate_compiler_generated_deps; then
for pre_post_dep in $predeps $postdeps; do
case "$pre_post_deps " in
*" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
esac
pre_post_deps="$pre_post_deps $pre_post_dep"
done
fi
pre_post_deps=
fi
deplibs=
newdependency_libs=
newlib_search_path=
need_relink=no # whether we're linking any uninstalled libtool libraries
notinst_deplibs= # not-installed libtool libraries
notinst_path= # paths that contain not-installed libtool libraries
case $linkmode in
lib)
passes="conv dlpreopen link"
for file in $dlfiles $dlprefiles; do
case $file in
*.la) ;;
*)
func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
;;
esac
done
;;
prog)
compile_deplibs=
finalize_deplibs=
alldeplibs=no
newdlfiles=
newdlprefiles=
passes="conv scan dlopen dlpreopen link"
;;
*) passes="conv"
;;
esac
for pass in $passes; do
# The preopen pass in lib mode reverses $deplibs; put it back here
# so that -L comes before libs that need it for instance...
if test "$linkmode,$pass" = "lib,link"; then
## FIXME: Find the place where the list is rebuilt in the wrong
## order, and fix it there properly
tmp_deplibs=
for deplib in $deplibs; do
tmp_deplibs="$deplib $tmp_deplibs"
done
deplibs="$tmp_deplibs"
fi
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan"; then
libs="$deplibs"
deplibs=
fi
if test "$linkmode" = prog; then
case $pass in
dlopen) libs="$dlfiles" ;;
dlpreopen) libs="$dlprefiles" ;;
link)
libs="$deplibs %DEPLIBS%"
test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
;;
esac
fi
if test "$linkmode,$pass" = "lib,dlpreopen"; then
# Collect and forward deplibs of preopened libtool libs
for lib in $dlprefiles; do
# Ignore non-libtool-libs
dependency_libs=
case $lib in
*.la) func_source "$lib" ;;
esac
# Collect preopened libtool deplibs, except any this library
# has declared as weak libs
for deplib in $dependency_libs; do
deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
case " $weak_libs " in
*" $deplib_base "*) ;;
*) deplibs="$deplibs $deplib" ;;
esac
done
done
libs="$dlprefiles"
fi
if test "$pass" = dlopen; then
# Collect dlpreopened libraries
save_deplibs="$deplibs"
deplibs=
fi
for deplib in $libs; do
lib=
found=no
case $deplib in
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
compiler_flags="$compiler_flags $deplib"
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
esac
fi
fi
continue
;;
-l*)
if test "$linkmode" != lib && test "$linkmode" != prog; then
func_warning "\`-l' is ignored for archives/objects"
continue
fi
func_stripname '-l' '' "$deplib"
name=$func_stripname_result
if test "$linkmode" = lib; then
searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
else
searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
fi
for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
lib="$searchdir/lib${name}${search_ext}"
if test -f "$lib"; then
if test "$search_ext" = ".la"; then
found=yes
else
found=no
fi
break 2
fi
done
done
if test "$found" != yes; then
# deplib doesn't seem to be a libtool library
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
fi
continue
else # deplib is a libtool library
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
# We need to do some special things here, and not later.
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $deplib "*)
if func_lalib_p "$lib"; then
library_names=
old_library=
func_source "$lib"
for l in $old_library $library_names; do
ll="$l"
done
if test "X$ll" = "X$old_library" ; then # only static version available
found=no
func_dirname "$lib" "" "."
ladir="$func_dirname_result"
lib=$ladir/$old_library
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
fi
;;
*) ;;
esac
fi
fi
;; # -l
*.ltframework)
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
esac
fi
fi
continue
;;
-L*)
case $linkmode in
lib)
deplibs="$deplib $deplibs"
test "$pass" = conv && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
newlib_search_path="$newlib_search_path $func_stripname_result"
;;
prog)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
if test "$pass" = scan; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
func_stripname '-L' '' "$deplib"
newlib_search_path="$newlib_search_path $func_stripname_result"
;;
*)
func_warning "\`-L' is ignored for archives/objects"
;;
esac # linkmode
continue
;; # -L
-R*)
if test "$pass" = link; then
func_stripname '-R' '' "$deplib"
dir=$func_stripname_result
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
*" $dir "*) ;;
*) xrpath="$xrpath $dir" ;;
esac
fi
deplibs="$deplib $deplibs"
continue
;;
*.la) lib="$deplib" ;;
*.$libext)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
case $linkmode in
lib)
# Linking convenience modules into shared libraries is allowed,
# but linking other static libraries is non-portable.
case " $dlpreconveniencelibs " in
*" $deplib "*) ;;
*)
valid_a_lib=no
case $deplibs_check_method in
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
valid_a_lib=yes
fi
;;
pass_all)
valid_a_lib=yes
;;
esac
if test "$valid_a_lib" != yes; then
$ECHO
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
$ECHO "*** I have the capability to make that library automatically link in when"
$ECHO "*** you link to this library. But I can only do this if you have a"
$ECHO "*** shared version of the library, which you do not appear to have"
$ECHO "*** because the file extensions .$libext of this argument makes me believe"
$ECHO "*** that it is just a static archive that I should not use here."
else
$ECHO
$ECHO "*** Warning: Linking the shared library $output against the"
$ECHO "*** static library $deplib is not portable!"
deplibs="$deplib $deplibs"
fi
;;
esac
continue
;;
prog)
if test "$pass" != link; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
continue
;;
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
elif test "$linkmode" = prog; then
if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
newdlprefiles="$newdlprefiles $deplib"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
newdlfiles="$newdlfiles $deplib"
fi
fi
continue
;;
%DEPLIBS%)
alldeplibs=yes
continue
;;
esac # case $deplib
if test "$found" = yes || test -f "$lib"; then :
else
func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
fi
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$lib" \
|| func_fatal_error "\`$lib' is not a valid libtool archive"
func_dirname "$lib" "" "."
ladir="$func_dirname_result"
dlname=
dlopen=
dlpreopen=
libdir=
library_names=
old_library=
inherited_linker_flags=
# If the library was installed with an old release of libtool,
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
avoidtemprpath=
# Read the .la file
func_source "$lib"
# Convert "-framework foo" to "foo.ltframework"
if test -n "$inherited_linker_flags"; then
tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
case " $new_inherited_linker_flags " in
*" $tmp_inherited_linker_flag "*) ;;
*) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
esac
done
fi
dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
fi
if test "$pass" = conv; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
func_fatal_error "cannot find name of link library for \`$lib'"
fi
# It is a libtool convenience library, so add in its objects.
convenience="$convenience $ladir/$objdir/$old_library"
old_convenience="$old_convenience $ladir/$objdir/$old_library"
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
if $opt_duplicate_deps ; then
case "$tmp_libs " in
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
tmp_libs="$tmp_libs $deplib"
done
elif test "$linkmode" != prog && test "$linkmode" != lib; then
func_fatal_error "\`$lib' is not a convenience library"
fi
continue
fi # $pass = conv
# Get the name of the library we link against.
linklib=
for l in $old_library $library_names; do
linklib="$l"
done
if test -z "$linklib"; then
func_fatal_error "cannot find name of link library for \`$lib'"
fi
# This library was specified with -dlopen.
if test "$pass" = dlopen; then
if test -z "$libdir"; then
func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
fi
if test -z "$dlname" ||
test "$dlopen_support" != yes ||
test "$build_libtool_libs" = no; then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# bomb out in the load deplibs phase.
dlprefiles="$dlprefiles $lib $dependency_libs"
else
newdlfiles="$newdlfiles $lib"
fi
continue
fi # $pass = dlopen
# We need an absolute path.
case $ladir in
[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
func_warning "cannot determine absolute directory name of \`$ladir'"
func_warning "passing it literally to the linker, although it might fail"
abs_ladir="$ladir"
fi
;;
esac
func_basename "$lib"
laname="$func_basename_result"
# Find the relevant object directory and library name.
if test "X$installed" = Xyes; then
if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
func_warning "library \`$lib' was moved."
dir="$ladir"
absdir="$abs_ladir"
libdir="$abs_ladir"
else
dir="$libdir"
absdir="$libdir"
fi
test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
dir="$ladir"
absdir="$abs_ladir"
# Remove this search path later
notinst_path="$notinst_path $abs_ladir"
else
dir="$ladir/$objdir"
absdir="$abs_ladir/$objdir"
# Remove this search path later
notinst_path="$notinst_path $abs_ladir"
fi
fi # $installed = yes
func_stripname 'lib' '.la' "$laname"
name=$func_stripname_result
# This library was specified with -dlpreopen.
if test "$pass" = dlpreopen; then
if test -z "$libdir" && test "$linkmode" = prog; then
func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
fi
# Prefer using a static library (so that no silly _DYNAMIC symbols
# are required to link).
if test -n "$old_library"; then
newdlprefiles="$newdlprefiles $dir/$old_library"
# Keep a list of preopened convenience libraries to check
# that they are being used correctly in the link pass.
test -z "$libdir" && \
dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
# Otherwise, use the dlname, so that lt_dlopen finds it.
elif test -n "$dlname"; then
newdlprefiles="$newdlprefiles $dir/$dlname"
else
newdlprefiles="$newdlprefiles $dir/$linklib"
fi
fi # $pass = dlpreopen
if test -z "$libdir"; then
# Link the convenience library
if test "$linkmode" = lib; then
deplibs="$dir/$old_library $deplibs"
elif test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
deplibs="$lib $deplibs" # used for prog,scan pass
fi
continue
fi
if test "$linkmode" = prog && test "$pass" != link; then
newlib_search_path="$newlib_search_path $ladir"
deplibs="$lib $deplibs"
linkalldeplibs=no
if test "$link_all_deplibs" != no || test -z "$library_names" ||
test "$build_libtool_libs" = no; then
linkalldeplibs=yes
fi
tmp_libs=
for deplib in $dependency_libs; do
case $deplib in
-L*) func_stripname '-L' '' "$deplib"
newlib_search_path="$newlib_search_path $func_stripname_result"
;;
esac
# Need to link against all dependency_libs?
if test "$linkalldeplibs" = yes; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
if $opt_duplicate_deps ; then
case "$tmp_libs " in
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
tmp_libs="$tmp_libs $deplib"
done # for deplib
continue
fi # $linkmode = prog...
if test "$linkmode,$pass" = "prog,link"; then
if test -n "$library_names" &&
{ { test "$prefer_static_libs" = no ||
test "$prefer_static_libs,$installed" = "built,yes"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
case "$temp_rpath:" in
*"$absdir:"*) ;;
*) temp_rpath="$temp_rpath$absdir:" ;;
esac
fi
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
case " $sys_lib_dlsearch_path " in
*" $absdir "*) ;;
*)
case "$compile_rpath " in
*" $absdir "*) ;;
*) compile_rpath="$compile_rpath $absdir"
esac
;;
esac
case " $sys_lib_dlsearch_path " in
*" $libdir "*) ;;
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir"
esac
;;
esac
fi # $linkmode,$pass = prog,link...
if test "$alldeplibs" = yes &&
{ test "$deplibs_check_method" = pass_all ||
{ test "$build_libtool_libs" = yes &&
test -n "$library_names"; }; }; then
# We only need to search for static libraries
continue
fi
fi
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
if test "$use_static_libs" = built && test "$installed" = yes; then
use_static_libs=no
fi
if test -n "$library_names" &&
{ test "$use_static_libs" = no || test -z "$old_library"; }; then
case $host in
*cygwin* | *mingw* | *cegcc*)
# No point in relinking DLLs because paths are not encoded
notinst_deplibs="$notinst_deplibs $lib"
need_relink=no
;;
*)
if test "$installed" = no; then
notinst_deplibs="$notinst_deplibs $lib"
need_relink=yes
fi
;;
esac
# This is a shared library
# Warn about portability, can't link against -module's on some
# systems (darwin). Don't bleat about dlopened modules though!
dlopenmodule=""
for dlpremoduletest in $dlprefiles; do
if test "X$dlpremoduletest" = "X$lib"; then
dlopenmodule="$dlpremoduletest"
break
fi
done
if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
$ECHO
if test "$linkmode" = prog; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
$ECHO "*** Warning: Linking the shared library $output against the loadable module"
fi
$ECHO "*** $linklib is not portable!"
fi
if test "$linkmode" = lib &&
test "$hardcode_into_libs" = yes; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
case " $sys_lib_dlsearch_path " in
*" $absdir "*) ;;
*)
case "$compile_rpath " in
*" $absdir "*) ;;
*) compile_rpath="$compile_rpath $absdir"
esac
;;
esac
case " $sys_lib_dlsearch_path " in
*" $libdir "*) ;;
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir"
esac
;;
esac
fi
if test -n "$old_archive_from_expsyms_cmds"; then
# figure out the soname
set dummy $library_names
shift
realname="$1"
shift
libname=`eval "\\$ECHO \"$libname_spec\""`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
soname="$dlname"
elif test -n "$soname_spec"; then
# bleh windows
case $host in
*cygwin* | mingw* | *cegcc*)
func_arith $current - $age
major=$func_arith_result
versuffix="-$major"
;;
esac
eval soname=\"$soname_spec\"
else
soname="$realname"
fi
# Make a new name for the extract_expsyms_cmds to use
soroot="$soname"
func_basename "$soroot"
soname="$func_basename_result"
func_stripname 'lib' '.dll' "$soname"
newlib=libimp-$func_stripname_result.a
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
func_verbose "extracting exported symbol list from \`$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
func_verbose "generating import library for \`$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
dir=$output_objdir
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
if test "$linkmode" = prog || test "$mode" != relink; then
add_shlibpath=
add_dir=
add=
lib_linked=yes
case $hardcode_action in
immediate | unsupported)
if test "$hardcode_direct" = no; then
add="$dir/$linklib"
case $host in
*-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
*-*-sysv4*uw2*) add_dir="-L$dir" ;;
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
*-*-unixware7*) add_dir="-L$dir" ;;
*-*-darwin* )
# if the lib is a (non-dlopened) module then we can not
# link against it, someone is ignoring the earlier warnings
if /usr/bin/file -L $add 2> /dev/null |
$GREP ": [^:]* bundle" >/dev/null ; then
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
$ECHO
$ECHO "*** And there doesn't seem to be a static archive available"
$ECHO "*** The link will probably fail, sorry"
else
add="$dir/$old_library"
fi
elif test -n "$old_library"; then
add="$dir/$old_library"
fi
fi
esac
elif test "$hardcode_minus_L" = no; then
case $host in
*-*-sunos*) add_shlibpath="$dir" ;;
esac
add_dir="-L$dir"
add="-l$name"
elif test "$hardcode_shlibpath_var" = no; then
add_shlibpath="$dir"
add="-l$name"
else
lib_linked=no
fi
;;
relink)
if test "$hardcode_direct" = yes &&
test "$hardcode_direct_absolute" = no; then
add="$dir/$linklib"
elif test "$hardcode_minus_L" = yes; then
add_dir="-L$dir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
esac
fi
add="-l$name"
elif test "$hardcode_shlibpath_var" = yes; then
add_shlibpath="$dir"
add="-l$name"
else
lib_linked=no
fi
;;
*) lib_linked=no ;;
esac
if test "$lib_linked" != yes; then
func_fatal_configuration "unsupported hardcode properties"
fi
if test -n "$add_shlibpath"; then
case :$compile_shlibpath: in
*":$add_shlibpath:"*) ;;
*) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
esac
fi
if test "$linkmode" = prog; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
if test "$hardcode_direct" != yes &&
test "$hardcode_minus_L" != yes &&
test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
esac
fi
fi
fi
if test "$linkmode" = prog || test "$mode" = relink; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
if test "$hardcode_direct" = yes &&
test "$hardcode_direct_absolute" = no; then
add="$libdir/$linklib"
elif test "$hardcode_minus_L" = yes; then
add_dir="-L$libdir"
add="-l$name"
elif test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
esac
add="-l$name"
elif test "$hardcode_automatic" = yes; then
if test -n "$inst_prefix_dir" &&
test -f "$inst_prefix_dir$libdir/$linklib" ; then
add="$inst_prefix_dir$libdir/$linklib"
else
add="$libdir/$linklib"
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
add_dir="-L$libdir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
esac
fi
add="-l$name"
fi
if test "$linkmode" = prog; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
fi
fi
elif test "$linkmode" = prog; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
if test "$hardcode_direct" != unsupported; then
test -n "$old_library" && linklib="$old_library"
compile_deplibs="$dir/$linklib $compile_deplibs"
finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
compile_deplibs="-l$name -L$dir $compile_deplibs"
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
elif test "$build_libtool_libs" = yes; then
# Not a shared library
if test "$deplibs_check_method" != pass_all; then
# We're trying link a shared library against a static one
# but the system doesn't support it.
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
$ECHO
$ECHO "*** Warning: This system can not link to static lib archive $lib."
$ECHO "*** I have the capability to make that library automatically link in when"
$ECHO "*** you link to this library. But I can only do this if you have a"
$ECHO "*** shared version of the library, which you do not appear to have."
if test "$module" = yes; then
$ECHO "*** But as you try to build a module library, libtool will still create "
$ECHO "*** a static module, that should work as long as the dlopening application"
$ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
$ECHO
$ECHO "*** However, this would only work if libtool was able to extract symbol"
$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
$ECHO "*** not find such a program. So, this module is probably useless."
$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
fi
else
deplibs="$dir/$old_library $deplibs"
link_static=yes
fi
fi # link shared/static library?
if test "$linkmode" = lib; then
if test -n "$dependency_libs" &&
{ test "$hardcode_into_libs" != yes ||
test "$build_old_libs" = yes ||
test "$link_static" = yes; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
case $libdir in
-R*) func_stripname '-R' '' "$libdir"
temp_xrpath=$func_stripname_result
case " $xrpath " in
*" $temp_xrpath "*) ;;
*) xrpath="$xrpath $temp_xrpath";;
esac;;
*) temp_deplibs="$temp_deplibs $libdir";;
esac
done
dependency_libs="$temp_deplibs"
fi
newlib_search_path="$newlib_search_path $absdir"
# Link against this library
test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
newdependency_libs="$deplib $newdependency_libs"
if $opt_duplicate_deps ; then
case "$tmp_libs " in
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
tmp_libs="$tmp_libs $deplib"
done
if test "$link_all_deplibs" != no; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
path=
case $deplib in
-L*) path="$deplib" ;;
*.la)
func_dirname "$deplib" "" "."
dir="$func_dirname_result"
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
func_warning "cannot determine absolute directory name of \`$dir'"
absdir="$dir"
fi
;;
esac
if $GREP "^installed=no" $deplib > /dev/null; then
case $host in
*-*-darwin*)
depdepl=
eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
if test -n "$deplibrary_names" ; then
for tmp in $deplibrary_names ; do
depdepl=$tmp
done
if test -f "$absdir/$objdir/$depdepl" ; then
depdepl="$absdir/$objdir/$depdepl"
darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
if test -z "$darwin_install_name"; then
darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
path=
fi
fi
;;
*)
path="-L$absdir/$objdir"
;;
esac
else
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
func_fatal_error "\`$deplib' is not a valid libtool archive"
test "$absdir" != "$libdir" && \
func_warning "\`$deplib' seems to be moved"
path="-L$absdir"
fi
;;
esac
case " $deplibs " in
*" $path "*) ;;
*) deplibs="$path $deplibs" ;;
esac
done
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
if test "$pass" = link; then
if test "$linkmode" = "prog"; then
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
dependency_libs="$newdependency_libs"
if test "$pass" = dlpreopen; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
if test "$pass" != dlopen; then
if test "$pass" != conv; then
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
case "$lib_search_path " in
*" $dir "*) ;;
*) lib_search_path="$lib_search_path $dir" ;;
esac
done
newlib_search_path=
fi
if test "$linkmode,$pass" != "prog,link"; then
vars="deplibs"
else
vars="compile_deplibs finalize_deplibs"
fi
for var in $vars dependency_libs; do
# Add libraries to $var in reverse order
eval tmp_libs=\"\$$var\"
new_libs=
for deplib in $tmp_libs; do
# FIXME: Pedantically, this is the right thing to do, so
# that some nasty dependency loop isn't accidentally
# broken:
#new_libs="$deplib $new_libs"
# Pragmatically, this seems to cause very few problems in
# practice:
case $deplib in
-L*) new_libs="$deplib $new_libs" ;;
-R*) ;;
*)
# And here is the reason: when a library appears more
# than once as an explicit dependence of a library, or
# is implicitly linked in more than once by the
# compiler, it is considered special, and multiple
# occurrences thereof are not removed. Compare this
# with having the same library being listed as a
# dependency of multiple other libraries: in this case,
# we know (pedantically, we assume) the library does not
# need to be listed more than once, so we keep only the
# last copy. This is not always right, but it is rare
# enough that we require users that really mean to play
# such unportable linking tricks to link the library
# using -Wl,-lname, so that libtool does not consider it
# for duplicate removal.
case " $specialdeplibs " in
*" $deplib "*) new_libs="$deplib $new_libs" ;;
*)
case " $new_libs " in
*" $deplib "*) ;;
*) new_libs="$deplib $new_libs" ;;
esac
;;
esac
;;
esac
done
tmp_libs=
for deplib in $new_libs; do
case $deplib in
-L*)
case " $tmp_libs " in
*" $deplib "*) ;;
*) tmp_libs="$tmp_libs $deplib" ;;
esac
;;
*) tmp_libs="$tmp_libs $deplib" ;;
esac
done
eval $var=\"$tmp_libs\"
done # for var
fi
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
tmp_libs=
for i in $dependency_libs ; do
case " $predeps $postdeps $compiler_lib_search_path " in
*" $i "*)
i=""
;;
esac
if test -n "$i" ; then
tmp_libs="$tmp_libs $i"
fi
done
dependency_libs=$tmp_libs
done # for pass
if test "$linkmode" = prog; then
dlfiles="$newdlfiles"
fi
if test "$linkmode" = prog || test "$linkmode" = lib; then
dlprefiles="$newdlprefiles"
fi
case $linkmode in
oldlib)
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
func_warning "\`-dlopen' is ignored for archives"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
func_warning "\`-l' and \`-L' are ignored for archives" ;;
esac
test -n "$rpath" && \
func_warning "\`-rpath' is ignored for archives"
test -n "$xrpath" && \
func_warning "\`-R' is ignored for archives"
test -n "$vinfo" && \
func_warning "\`-version-info/-version-number' is ignored for archives"
test -n "$release" && \
func_warning "\`-release' is ignored for archives"
test -n "$export_symbols$export_symbols_regex" && \
func_warning "\`-export-symbols' is ignored for archives"
# Now set the variables for building old libraries.
build_libtool_libs=no
oldlibs="$output"
objs="$objs$old_deplibs"
;;
lib)
# Make sure we only generate libraries of the form `libNAME.la'.
case $outputname in
lib*)
func_stripname 'lib' '.la' "$outputname"
name=$func_stripname_result
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
;;
*)
test "$module" = no && \
func_fatal_help "libtool library \`$output' must begin with \`lib'"
if test "$need_lib_prefix" != no; then
# Add the "lib" prefix for modules if required
func_stripname '' '.la' "$outputname"
name=$func_stripname_result
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
else
func_stripname '' '.la' "$outputname"
libname=$func_stripname_result
fi
;;
esac
if test -n "$objs"; then
if test "$deplibs_check_method" != pass_all; then
func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
else
$ECHO
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
$ECHO "*** objects $objs is not portable!"
libobjs="$libobjs $objs"
fi
fi
test "$dlself" != no && \
func_warning "\`-dlopen self' is ignored for libtool libraries"
set dummy $rpath
shift
test "$#" -gt 1 && \
func_warning "ignoring multiple \`-rpath's for a libtool library"
install_libdir="$1"
oldlibs=
if test -z "$rpath"; then
if test "$build_libtool_libs" = yes; then
# Building a libtool convenience library.
# Some compilers have problems with a `.al' extension so
# convenience libraries should have the same extension an
# archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
build_libtool_libs=convenience
build_old_libs=yes
fi
test -n "$vinfo" && \
func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
test -n "$release" && \
func_warning "\`-release' is ignored for convenience libraries"
else
# Parse the version information argument.
save_ifs="$IFS"; IFS=':'
set dummy $vinfo 0 0 0
shift
IFS="$save_ifs"
test -n "$7" && \
func_fatal_help "too many parameters to \`-version-info'"
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
# to make the code below a bit more comprehensible
case $vinfo_number in
yes)
number_major="$1"
number_minor="$2"
number_revision="$3"
#
# There are really only two kinds -- those that
# use the current revision as the major version
# and those that subtract age and use age as
# a minor version. But, then there is irix
# which has an extra 1 added just for fun
#
case $version_type in
darwin|linux|osf|windows|none)
func_arith $number_major + $number_minor
current=$func_arith_result
age="$number_minor"
revision="$number_revision"
;;
freebsd-aout|freebsd-elf|sunos)
current="$number_major"
revision="$number_minor"
age="0"
;;
irix|nonstopux)
func_arith $number_major + $number_minor
current=$func_arith_result
age="$number_minor"
revision="$number_minor"
lt_irix_increment=no
;;
*)
func_fatal_configuration "$modename: unknown library version type \`$version_type'"
;;
esac
;;
no)
current="$1"
revision="$2"
age="$3"
;;
esac
# Check that each of the things are valid numbers.
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
func_error "CURRENT \`$current' must be a nonnegative integer"
func_fatal_error "\`$vinfo' is not valid version information"
;;
esac
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
func_error "REVISION \`$revision' must be a nonnegative integer"
func_fatal_error "\`$vinfo' is not valid version information"
;;
esac
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
func_error "AGE \`$age' must be a nonnegative integer"
func_fatal_error "\`$vinfo' is not valid version information"
;;
esac
if test "$age" -gt "$current"; then
func_error "AGE \`$age' is greater than the current interface number \`$current'"
func_fatal_error "\`$vinfo' is not valid version information"
fi
# Calculate the version variables.
major=
versuffix=
verstring=
case $version_type in
none) ;;
darwin)
# Like Linux, but with the current version available in
# verstring for coding it into the library header
func_arith $current - $age
major=.$func_arith_result
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
func_arith $current + 1
minor_current=$func_arith_result
xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
;;
freebsd-aout)
major=".$current"
versuffix=".$current.$revision";
;;
freebsd-elf)
major=".$current"
versuffix=".$current"
;;
irix | nonstopux)
if test "X$lt_irix_increment" = "Xno"; then
func_arith $current - $age
else
func_arith $current - $age + 1
fi
major=$func_arith_result
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
esac
verstring="$verstring_prefix$major.$revision"
# Add in all the interfaces that we are compatible with.
loop=$revision
while test "$loop" -ne 0; do
func_arith $revision - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
verstring="$verstring_prefix$major.$iface:$verstring"
done
# Before this point, $major must not contain `.'.
major=.$major
versuffix="$major.$revision"
;;
linux)
func_arith $current - $age
major=.$func_arith_result
versuffix="$major.$age.$revision"
;;
osf)
func_arith $current - $age
major=.$func_arith_result
versuffix=".$current.$age.$revision"
verstring="$current.$age.$revision"
# Add in all the interfaces that we are compatible with.
loop=$age
while test "$loop" -ne 0; do
func_arith $current - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
verstring="$verstring:${iface}.0"
done
# Make executables depend on our current version.
verstring="$verstring:${current}.0"
;;
qnx)
major=".$current"
versuffix=".$current"
;;
sunos)
major=".$current"
versuffix=".$current.$revision"
;;
windows)
# Use '-' rather than '.', since we only want one
# extension on DOS 8.3 filesystems.
func_arith $current - $age
major=$func_arith_result
versuffix="-$major"
;;
*)
func_fatal_configuration "unknown library version type \`$version_type'"
;;
esac
# Clear the version info if we defaulted, and they specified a release.
if test -z "$vinfo" && test -n "$release"; then
major=
case $version_type in
darwin)
# we can't check for "0.0" in archive_cmds due to quoting
# problems, so we reset it completely
verstring=
;;
*)
verstring="0.0"
;;
esac
if test "$need_version" = no; then
versuffix=
else
versuffix=".0.0"
fi
fi
# Remove version info from name if versioning should be avoided
if test "$avoid_version" = yes && test "$need_version" = no; then
major=
versuffix=
verstring=""
fi
# Check to see if the archive will have undefined symbols.
if test "$allow_undefined" = yes; then
if test "$allow_undefined_flag" = unsupported; then
func_warning "undefined symbols not allowed in $host shared libraries"
build_libtool_libs=no
build_old_libs=yes
fi
else
# Don't allow undefined symbols.
allow_undefined_flag="$no_undefined_flag"
fi
fi
func_generate_dlsyms "$libname" "$libname" "yes"
libobjs="$libobjs $symfileobj"
test "X$libobjs" = "X " && libobjs=
if test "$mode" != relink; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
tempremovelist=`$ECHO "$output_objdir/*"`
for p in $tempremovelist; do
case $p in
*.$objext | *.gcno)
;;
$output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
if test "X$precious_files_regex" != "X"; then
if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
fi
fi
removelist="$removelist $p"
;;
*) ;;
esac
done
test -n "$removelist" && \
func_show_eval "${RM}r \$removelist"
fi
# Now set the variables for building old libraries.
if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
oldlibs="$oldlibs $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
#for path in $notinst_path; do
# lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
# deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
# dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
#done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
temp_xrpath=
for libdir in $xrpath; do
temp_xrpath="$temp_xrpath -R$libdir"
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir" ;;
esac
done
if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
# Make sure dlfiles contains only unique files that won't be dlpreopened
old_dlfiles="$dlfiles"
dlfiles=
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
*" $lib "*) ;;
*) dlfiles="$dlfiles $lib" ;;
esac
done
# Make sure dlprefiles contains only unique files
old_dlprefiles="$dlprefiles"
dlprefiles=
for lib in $old_dlprefiles; do
case "$dlprefiles " in
*" $lib "*) ;;
*) dlprefiles="$dlprefiles $lib" ;;
esac
done
if test "$build_libtool_libs" = yes; then
if test -n "$rpath"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
# these systems don't actually have a c library (as such)!
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C library is in the System framework
deplibs="$deplibs System.ltframework"
;;
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
;;
*)
# Add libc to deplibs on all other systems if necessary.
if test "$build_libtool_need_lc" = "yes"; then
deplibs="$deplibs -lc"
fi
;;
esac
fi
# Transform deplibs into only deplibs that can be linked in shared.
name_save=$name
libname_save=$libname
release_save=$release
versuffix_save=$versuffix
major_save=$major
# I'm not sure if I'm treating the release correctly. I think
# release should show up in the -l (ie -lgmp5) so we don't want to
# add it in twice. Is that correct?
release=""
versuffix=""
major=""
newdeplibs=
droppeddeps=no
case $deplibs_check_method in
pass_all)
# Don't check for shared/static. Everything works.
# This might be a little naive. We might want to check
# whether the library exists or not. But this is on
# osf3 & osf4 and I'm not really sure... Just
# implementing what was already the behavior.
newdeplibs=$deplibs
;;
test_compile)
# This code stresses the "libraries are programs" paradigm to its
# limits. Maybe even breaks it. We compile a program, linking it
# against the deplibs as a proxy for the library. Then we can check
# whether they linked in statically or dynamically with ldd.
$opt_dry_run || $RM conftest.c
cat > conftest.c <<EOF
int main() { return 0; }
EOF
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
ldd_output=`ldd conftest`
for i in $deplibs; do
case $i in
-l*)
func_stripname -l '' "$i"
name=$func_stripname_result
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
newdeplibs="$newdeplibs $i"
i=""
;;
esac
fi
if test -n "$i" ; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
newdeplibs="$newdeplibs $i"
else
droppeddeps=yes
$ECHO
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
$ECHO "*** I have the capability to make that library automatically link in when"
$ECHO "*** you link to this library. But I can only do this if you have a"
$ECHO "*** shared version of the library, which I believe you do not have"
$ECHO "*** because a test_compile did reveal that the linker did not use it for"
$ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
fi
fi
;;
*)
newdeplibs="$newdeplibs $i"
;;
esac
done
else
# Error occurred in the first compile. Let's try to salvage
# the situation: Compile a separate program for each library.
for i in $deplibs; do
case $i in
-l*)
func_stripname -l '' "$i"
name=$func_stripname_result
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
newdeplibs="$newdeplibs $i"
i=""
;;
esac
fi
if test -n "$i" ; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
newdeplibs="$newdeplibs $i"
else
droppeddeps=yes
$ECHO
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
$ECHO "*** I have the capability to make that library automatically link in when"
$ECHO "*** you link to this library. But I can only do this if you have a"
$ECHO "*** shared version of the library, which you do not appear to have"
$ECHO "*** because a test_compile did reveal that the linker did not use this one"
$ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
fi
fi
else
droppeddeps=yes
$ECHO
$ECHO "*** Warning! Library $i is needed by this library but I was not able to"
$ECHO "*** make it link in! You will probably need to install it or some"
$ECHO "*** library that it depends on before this library will be fully"
$ECHO "*** functional. Installing it before continuing would be even better."
fi
;;
*)
newdeplibs="$newdeplibs $i"
;;
esac
done
fi
;;
file_magic*)
set dummy $deplibs_check_method; shift
file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
for a_deplib in $deplibs; do
case $a_deplib in
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
;;
esac
fi
if test -n "$a_deplib" ; then
libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
# Follow soft links.
if ls -lLd "$potent_lib" 2>/dev/null |
$GREP " -> " >/dev/null; then
continue
fi
# The statement above tries to avoid entering an
# endless loop below, in case of cyclic links.
# We might still enter an endless loop, since a link
# loop can be closed while we follow links,
# but so what?
potlib="$potent_lib"
while test -h "$potlib" 2>/dev/null; do
potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
break 2
fi
done
done
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
$ECHO
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
$ECHO "*** I have the capability to make that library automatically link in when"
$ECHO "*** you link to this library. But I can only do this if you have a"
$ECHO "*** shared version of the library, which you do not appear to have"
$ECHO "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
$ECHO "*** using a file magic. Last file checked: $potlib"
fi
fi
;;
*)
# Add a -L argument.
newdeplibs="$newdeplibs $a_deplib"
;;
esac
done # Gone through all deplibs.
;;
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
for a_deplib in $deplibs; do
case $a_deplib in
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
;;
esac
fi
if test -n "$a_deplib" ; then
libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
potlib="$potent_lib" # see symlink-check above in file_magic test
if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
break 2
fi
done
done
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
$ECHO
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
$ECHO "*** I have the capability to make that library automatically link in when"
$ECHO "*** you link to this library. But I can only do this if you have a"
$ECHO "*** shared version of the library, which you do not appear to have"
$ECHO "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
$ECHO "*** using a regex pattern. Last file checked: $potlib"
fi
fi
;;
*)
# Add a -L argument.
newdeplibs="$newdeplibs $a_deplib"
;;
esac
done # Gone through all deplibs.
;;
none | unknown | *)
newdeplibs=""
tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
-e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
for i in $predeps $postdeps ; do
# can't use Xsed below, because $i might contain '/'
tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
done
fi
if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
$GREP . >/dev/null; then
$ECHO
if test "X$deplibs_check_method" = "Xnone"; then
$ECHO "*** Warning: inter-library dependencies are not supported in this platform."
else
$ECHO "*** Warning: inter-library dependencies are not known to be supported."
fi
$ECHO "*** All declared inter-library dependencies are being dropped."
droppeddeps=yes
fi
;;
esac
versuffix=$versuffix_save
major=$major_save
release=$release_save
libname=$libname_save
name=$name_save
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library with the System framework
newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
;;
esac
if test "$droppeddeps" = yes; then
if test "$module" = yes; then
$ECHO
$ECHO "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
$ECHO "*** a static module, that should work as long as the dlopening"
$ECHO "*** application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
$ECHO
$ECHO "*** However, this would only work if libtool was able to extract symbol"
$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
$ECHO "*** not find such a program. So, this module is probably useless."
$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
else
$ECHO "*** The inter-library dependencies that have been dropped here will be"
$ECHO "*** automatically added whenever a program is linked with this library"
$ECHO "*** or is declared to -dlopen it."
if test "$allow_undefined" = no; then
$ECHO
$ECHO "*** Since this library must not contain undefined symbols,"
$ECHO "*** because either the platform does not support them or"
$ECHO "*** it was explicitly requested with -no-undefined,"
$ECHO "*** libtool will only create a static version of it."
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
fi
fi
fi
# Done checking deplibs!
deplibs=$newdeplibs
fi
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
case $host in
*-*-darwin*)
newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
# move library search paths that coincide with paths to not yet
# installed libraries to the beginning of the library search list
new_libs=
for path in $notinst_path; do
case " $new_libs " in
*" -L$path/$objdir "*) ;;
*)
case " $deplibs " in
*" -L$path/$objdir "*)
new_libs="$new_libs -L$path/$objdir" ;;
esac
;;
esac
done
for deplib in $deplibs; do
case $deplib in
-L*)
case " $new_libs " in
*" $deplib "*) ;;
*) new_libs="$new_libs $deplib" ;;
esac
;;
*) new_libs="$new_libs $deplib" ;;
esac
done
deplibs="$new_libs"
# All the library-specific variables (install_libdir is set above).
library_names=
old_library=
dlname=
# Test again, we may have decided not to build it any more
if test "$build_libtool_libs" = yes; then
if test "$hardcode_into_libs" = yes; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
rpath="$finalize_rpath"
test "$mode" != relink && rpath="$compile_rpath$rpath"
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
dep_rpath="$dep_rpath $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
*) perm_rpath="$perm_rpath $libdir" ;;
esac
fi
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
if test -n "$hardcode_libdir_flag_spec_ld"; then
eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
else
eval dep_rpath=\"$hardcode_libdir_flag_spec\"
fi
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
rpath="$rpath$dir:"
done
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
fi
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
fi
shlibpath="$finalize_shlibpath"
test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
# Get the real and link names of the library.
eval shared_ext=\"$shrext_cmds\"
eval library_names=\"$library_names_spec\"
set dummy $library_names
shift
realname="$1"
shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
else
soname="$realname"
fi
if test -z "$dlname"; then
dlname=$soname
fi
lib="$output_objdir/$realname"
linknames=
for link
do
linknames="$linknames $link"
done
# Use standard objects if they are pic
test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
test "X$libobjs" = "X " && libobjs=
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
export_symbols="$output_objdir/$libname.uexp"
delfiles="$delfiles $export_symbols"
fi
orig_export_symbols=
case $host_os in
cygwin* | mingw* | cegcc*)
if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
# exporting using user supplied symfile
if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
# and it's NOT already a .def file. Must figure out
# which of the given symbols are data symbols and tag
# them as such. So, trigger use of export_symbols_cmds.
# export_symbols gets reassigned inside the "prepare
# the list of exported symbols" if statement, so the
# include_expsyms logic still works.
orig_export_symbols="$export_symbols"
export_symbols=
always_export_symbols=yes
fi
fi
;;
esac
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
func_verbose "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
func_len " $cmd"
len=$func_len_result
if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
func_show_eval "$cmd" 'exit $?'
skipped_export=false
else
# The command line is too long to execute in one step.
func_verbose "using reloadable object file for export list..."
skipped_export=:
# Break out early, otherwise skipped_export may be
# set to false by a later but shorter cmd.
break
fi
done
IFS="$save_ifs"
if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
fi
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols="$export_symbols"
test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
$opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
fi
if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
# 's' commands which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
tmp_deplibs=
for test_deplib in $deplibs; do
case " $convenience " in
*" $test_deplib "*) ;;
*)
tmp_deplibs="$tmp_deplibs $test_deplib"
;;
esac
done
deplibs="$tmp_deplibs"
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec" &&
test "$compiler_needs_object" = yes &&
test -z "$libobjs"; then
# extract the archives, so we have objects to list.
# TODO: could optimize this to just extract one archive.
whole_archive_flag_spec=
fi
if test -n "$whole_archive_flag_spec"; then
save_libobjs=$libobjs
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
else
gentop="$output_objdir/${outputname}x"
generated="$generated $gentop"
func_extract_archives $gentop $convenience
libobjs="$libobjs $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
fi
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
linker_flags="$linker_flags $flag"
fi
# Make a backup of the uninstalled library when relinking
if test "$mode" = relink; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
if test "$module" = yes && test -n "$module_cmds" ; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
eval test_cmds=\"$module_expsym_cmds\"
cmds=$module_expsym_cmds
else
eval test_cmds=\"$module_cmds\"
cmds=$module_cmds
fi
else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
eval test_cmds=\"$archive_expsym_cmds\"
cmds=$archive_expsym_cmds
else
eval test_cmds=\"$archive_cmds\"
cmds=$archive_cmds
fi
fi
if test "X$skipped_export" != "X:" &&
func_len " $test_cmds" &&
len=$func_len_result &&
test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
# The command line is too long to link in one step, link piecewise
# or, if using GNU ld and skipped_export is not :, use a linker
# script.
# Save the value of $output and $libobjs because we want to
# use them later. If we have whole_archive_flag_spec, we
# want to use save_libobjs as it was before
# whole_archive_flag_spec was expanded, because we can't
# assume the linker understands whole_archive_flag_spec.
# This may have to be revisited, in case too many
# convenience libraries get linked in and end up exceeding
# the spec.
if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
save_libobjs=$libobjs
fi
save_output=$output
output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
test_cmds=
concat_cmds=
objlist=
last_robj=
k=1
if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
output=${output_objdir}/${output_la}.lnkscript
func_verbose "creating GNU ld script: $output"
$ECHO 'INPUT (' > $output
for obj in $save_libobjs
do
$ECHO "$obj" >> $output
done
$ECHO ')' >> $output
delfiles="$delfiles $output"
elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
output=${output_objdir}/${output_la}.lnk
func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
firstobj=
if test "$compiler_needs_object" = yes; then
firstobj="$1 "
shift
fi
for obj
do
$ECHO "$obj" >> $output
done
delfiles="$delfiles $output"
output=$firstobj\"$file_list_spec$output\"
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
output=$output_objdir/$output_la-${k}.$objext
eval test_cmds=\"$reload_cmds\"
func_len " $test_cmds"
len0=$func_len_result
len=$len0
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
if test "X$objlist" = X ||
test "$len" -lt "$max_cmd_len"; then
func_append objlist " $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
if test "$k" -eq 1 ; then
# The first file doesn't have a previous command to add.
eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
else
# All subsequent reloadable object files will link in
# the last one created.
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
fi
last_robj=$output_objdir/$output_la-${k}.$objext
func_arith $k + 1
k=$func_arith_result
output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
func_len " $last_robj"
func_arith $len0 + $func_len_result
len=$func_arith_result
fi
done
# Handle the remaining objects by creating one last
# reloadable object file. All subsequent reloadable object
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
if test -n "$last_robj"; then
eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
fi
delfiles="$delfiles $output"
else
output=
fi
if ${skipped_export-false}; then
func_verbose "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$opt_dry_run || $RM $export_symbols
libobjs=$output
# Append the command to create the export file.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
if test -n "$last_robj"; then
eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
fi
test -n "$save_libobjs" &&
func_verbose "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
save_ifs="$IFS"; IFS='~'
for cmd in $concat_cmds; do
IFS="$save_ifs"
$opt_silent || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
$opt_dry_run || eval "$cmd" || {
lt_exit=$?
# Restore the uninstalled library and exit
if test "$mode" = relink; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
fi
exit $lt_exit
}
done
IFS="$save_ifs"
if test -n "$export_symbols_regex" && ${skipped_export-false}; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
fi
if ${skipped_export-false}; then
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols="$export_symbols"
test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
$opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
# 's' commands which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
fi
libobjs=$output
# Restore the value of output.
output=$save_output
if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
fi
# Expand the library linking commands again to reset the
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
if test "$module" = yes && test -n "$module_cmds" ; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
cmds=$module_expsym_cmds
else
cmds=$module_cmds
fi
else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
cmds=$archive_expsym_cmds
else
cmds=$archive_cmds
fi
fi
fi
if test -n "$delfiles"; then
# Append the command to remove temporary files to $cmds.
eval cmds=\"\$cmds~\$RM $delfiles\"
fi
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
generated="$generated $gentop"
func_extract_archives $gentop $dlprefiles
libobjs="$libobjs $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
$opt_silent || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
$opt_dry_run || eval "$cmd" || {
lt_exit=$?
# Restore the uninstalled library and exit
if test "$mode" = relink; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
fi
exit $lt_exit
}
done
IFS="$save_ifs"
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
if test -z "$whole_archive_flag_spec"; then
func_show_eval '${RM}r "$gentop"'
fi
fi
exit $EXIT_SUCCESS
fi
# Create links to the real library.
for linkname in $linknames; do
if test "$realname" != "$linkname"; then
func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
fi
done
# If -module or -export-dynamic was specified, set the dlname.
if test "$module" = yes || test "$export_dynamic" = yes; then
# On all known operating systems, these are identical.
dlname="$soname"
fi
fi
;;
obj)
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
func_warning "\`-dlopen' is ignored for objects"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
func_warning "\`-l' and \`-L' are ignored for objects" ;;
esac
test -n "$rpath" && \
func_warning "\`-rpath' is ignored for objects"
test -n "$xrpath" && \
func_warning "\`-R' is ignored for objects"
test -n "$vinfo" && \
func_warning "\`-version-info' is ignored for objects"
test -n "$release" && \
func_warning "\`-release' is ignored for objects"
case $output in
*.lo)
test -n "$objs$old_deplibs" && \
func_fatal_error "cannot build library object \`$output' from non-libtool objects"
libobj=$output
func_lo2o "$libobj"
obj=$func_lo2o_result
;;
*)
libobj=
obj="$output"
;;
esac
# Delete the old objects.
$opt_dry_run || $RM $obj $libobj
# Objects from convenience libraries. This assumes
# single-version convenience libraries. Whenever we create
# different ones for PIC/non-PIC, this we'll have to duplicate
# the extraction.
reload_conv_objs=
gentop=
# reload_cmds runs $LD directly, so let us get rid of
# -Wl from whole_archive_flag_spec and hope we can get by with
# turning comma into space..
wl=
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
generated="$generated $gentop"
func_extract_archives $gentop $convenience
reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
# Create the old-style object.
reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
output="$obj"
func_execute_cmds "$reload_cmds" 'exit $?'
# Exit if we aren't doing a library object file.
if test -z "$libobj"; then
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
exit $EXIT_SUCCESS
fi
if test "$build_libtool_libs" != yes; then
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
# Create an invalid libtool object if no PIC, so that we don't
# accidentally link it into a program.
# $show "echo timestamp > $libobj"
# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
fi
if test -n "$pic_flag" || test "$pic_mode" != default; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
output="$libobj"
func_execute_cmds "$reload_cmds" 'exit $?'
fi
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
exit $EXIT_SUCCESS
;;
prog)
case $host in
*cygwin*) func_stripname '' '.exe' "$output"
output=$func_stripname_result.exe;;
esac
test -n "$vinfo" && \
func_warning "\`-version-info' is ignored for programs"
test -n "$release" && \
func_warning "\`-release' is ignored for programs"
test "$preload" = yes \
&& test "$dlopen_support" = unknown \
&& test "$dlopen_self" = unknown \
&& test "$dlopen_self_static" = unknown && \
func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library is the System framework
compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
;;
esac
case $host in
*-*-darwin*)
# Don't allow lazy linking, it breaks C++ global constructors
# But is supposedly fixed on 10.4 or later (yay!).
if test "$tagname" = CXX ; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
compile_command="$compile_command ${wl}-bind_at_load"
finalize_command="$finalize_command ${wl}-bind_at_load"
;;
esac
fi
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
# move library search paths that coincide with paths to not yet
# installed libraries to the beginning of the library search list
new_libs=
for path in $notinst_path; do
case " $new_libs " in
*" -L$path/$objdir "*) ;;
*)
case " $compile_deplibs " in
*" -L$path/$objdir "*)
new_libs="$new_libs -L$path/$objdir" ;;
esac
;;
esac
done
for deplib in $compile_deplibs; do
case $deplib in
-L*)
case " $new_libs " in
*" $deplib "*) ;;
*) new_libs="$new_libs $deplib" ;;
esac
;;
*) new_libs="$new_libs $deplib" ;;
esac
done
compile_deplibs="$new_libs"
compile_command="$compile_command $compile_deplibs"
finalize_command="$finalize_command $finalize_deplibs"
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
for libdir in $rpath $xrpath; do
# This is the magic to use -rpath.
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir" ;;
esac
done
fi
# Now hardcode the library paths
rpath=
hardcode_libdirs=
for libdir in $compile_rpath $finalize_rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
rpath="$rpath $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
*) perm_rpath="$perm_rpath $libdir" ;;
esac
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
*) dllsearchpath="$dllsearchpath:$libdir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
*) dllsearchpath="$dllsearchpath:$testbindir";;
esac
;;
esac
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
compile_rpath="$rpath"
rpath=
hardcode_libdirs=
for libdir in $finalize_rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
rpath="$rpath $flag"
fi
elif test -n "$runpath_var"; then
case "$finalize_perm_rpath " in
*" $libdir "*) ;;
*) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
esac
fi
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
finalize_rpath="$rpath"
if test -n "$libobjs" && test "$build_old_libs" = yes; then
# Transform all the library objects into standard objects.
compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
fi
func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
# template prelinking step
if test -n "$prelink_cmds"; then
func_execute_cmds "$prelink_cmds" 'exit $?'
fi
wrappers_required=yes
case $host in
*cygwin* | *mingw* )
if test "$build_libtool_libs" != yes; then
wrappers_required=no
fi
;;
*cegcc)
# Disable wrappers for cegcc, we are cross compiling anyway.
wrappers_required=no
;;
*)
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
wrappers_required=no
fi
;;
esac
if test "$wrappers_required" = no; then
# Replace the output file specification.
compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
func_show_eval "$link_command" 'exit_status=$?'
# Delete the generated files.
if test -f "$output_objdir/${outputname}S.${objext}"; then
func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
fi
exit $exit_status
fi
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
fi
if test -n "$finalize_shlibpath"; then
finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
fi
compile_var=
finalize_var=
if test -n "$runpath_var"; then
if test -n "$perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
rpath="$rpath$dir:"
done
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
if test -n "$finalize_perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $finalize_perm_rpath; do
rpath="$rpath$dir:"
done
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
fi
if test "$no_install" = yes; then
# We don't need to create a wrapper script.
link_command="$compile_var$compile_command$compile_rpath"
# Replace the output file specification.
link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
$opt_dry_run || $RM $output
# Link the executable and exit
func_show_eval "$link_command" 'exit $?'
exit $EXIT_SUCCESS
fi
if test "$hardcode_action" = relink; then
# Fast installation is not supported
link_command="$compile_var$compile_command$compile_rpath"
relink_command="$finalize_var$finalize_command$finalize_rpath"
func_warning "this platform does not like uninstalled shared libraries"
func_warning "\`$output' will be relinked during installation"
else
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
else
# fast_install is set to needless
relink_command=
fi
else
link_command="$compile_var$compile_command$compile_rpath"
relink_command="$finalize_var$finalize_command$finalize_rpath"
fi
fi
# Replace the output file specification.
link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
# Delete the old output files.
$opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
func_show_eval "$link_command" 'exit $?'
# Now create the wrapper script.
func_verbose "creating $output"
# Quote the relink command for shipping.
if test -n "$relink_command"; then
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
if eval test -z \"\${$var+set}\"; then
relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
elif eval var_value=\$$var; test -z "$var_value"; then
relink_command="$var=; export $var; $relink_command"
else
func_quote_for_eval "$var_value"
relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
fi
done
relink_command="(cd `pwd`; $relink_command)"
relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
fi
# Quote $ECHO for shipping.
if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
case $progpath in
[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
esac
qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
else
qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
fi
# Only actually do things if not in dry run mode.
$opt_dry_run || {
# win32 will think the script is a binary if it has
# a .exe suffix, so we strip it off here.
case $output in
*.exe) func_stripname '' '.exe' "$output"
output=$func_stripname_result ;;
esac
# test for cygwin because mv fails w/o .exe extensions
case $host in
*cygwin*)
exeext=.exe
func_stripname '' '.exe' "$outputname"
outputname=$func_stripname_result ;;
*) exeext= ;;
esac
case $host in
*cygwin* | *mingw* )
func_dirname_and_basename "$output" "" "."
output_name=$func_basename_result
output_path=$func_dirname_result
cwrappersource="$output_path/$objdir/lt-$output_name.c"
cwrapper="$output_path/$output_name.exe"
$RM $cwrappersource $cwrapper
trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
func_emit_cwrapperexe_src > $cwrappersource
# The wrapper executable is built using the $host compiler,
# because it contains $host paths and files. If cross-
# compiling, it, like the target executable, must be
# executed on the $host or under an emulation environment.
$opt_dry_run || {
$LTCC $LTCFLAGS -o $cwrapper $cwrappersource
$STRIP $cwrapper
}
# Now, create the wrapper script for func_source use:
func_ltwrapper_scriptname $cwrapper
$RM $func_ltwrapper_scriptname_result
trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
$opt_dry_run || {
# note: this script will not be executed, so do not chmod.
if test "x$build" = "x$host" ; then
$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
else
func_emit_wrapper no > $func_ltwrapper_scriptname_result
fi
}
;;
* )
$RM $output
trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
func_emit_wrapper no > $output
chmod +x $output
;;
esac
}
exit $EXIT_SUCCESS
;;
esac
# See if we need to build an old-fashioned archive.
for oldlib in $oldlibs; do
if test "$build_libtool_libs" = convenience; then
oldobjs="$libobjs_save $symfileobj"
addlibs="$convenience"
build_libtool_libs=no
else
if test "$build_libtool_libs" = module; then
oldobjs="$libobjs_save"
build_libtool_libs=no
else
oldobjs="$old_deplibs $non_pic_objects"
if test "$preload" = yes && test -f "$symfileobj"; then
oldobjs="$oldobjs $symfileobj"
fi
fi
addlibs="$old_convenience"
fi
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
generated="$generated $gentop"
func_extract_archives $gentop $addlibs
oldobjs="$oldobjs $func_extract_archives_result"
fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
cmds=$old_archive_from_new_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
generated="$generated $gentop"
func_extract_archives $gentop $dlprefiles
oldobjs="$oldobjs $func_extract_archives_result"
fi
# POSIX demands no paths to be encoded in archives. We have
# to avoid creating archives with duplicate basenames if we
# might have to extract them afterwards, e.g., when creating a
# static archive out of a convenience library, or when linking
# the entirety of a libtool archive into another (currently
# not supported by libtool).
if (for obj in $oldobjs
do
func_basename "$obj"
$ECHO "$func_basename_result"
done | sort | sort -uc >/dev/null 2>&1); then
:
else
$ECHO "copying selected object files to avoid basename conflicts..."
gentop="$output_objdir/${outputname}x"
generated="$generated $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
oldobjs=
counter=1
for obj in $save_oldobjs
do
func_basename "$obj"
objbase="$func_basename_result"
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
while :; do
# Make sure we don't pick an alternate name that also
# overlaps.
newobj=lt$counter-$objbase
func_arith $counter + 1
counter=$func_arith_result
case " $oldobjs " in
*[\ /]"$newobj "*) ;;
*) if test ! -f "$gentop/$newobj"; then break; fi ;;
esac
done
func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
oldobjs="$oldobjs $gentop/$newobj"
;;
*) oldobjs="$oldobjs $obj" ;;
esac
done
fi
eval cmds=\"$old_archive_cmds\"
func_len " $cmds"
len=$func_len_result
if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
func_verbose "using piecewise archive linking..."
save_RANLIB=$RANLIB
RANLIB=:
objlist=
concat_cmds=
save_oldobjs=$oldobjs
oldobjs=
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
last_oldobj=$obj
done
eval test_cmds=\"$old_archive_cmds\"
func_len " $test_cmds"
len0=$func_len_result
len=$len0
for obj in $save_oldobjs
do
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
func_append objlist " $obj"
if test "$len" -lt "$max_cmd_len"; then
:
else
# the above command should be used before it gets too long
oldobjs=$objlist
if test "$obj" = "$last_oldobj" ; then
RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
objlist=
len=$len0
fi
done
RANLIB=$save_RANLIB
oldobjs=$objlist
if test "X$oldobjs" = "X" ; then
eval cmds=\"\$concat_cmds\"
else
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
fi
fi
fi
func_execute_cmds "$cmds" 'exit $?'
done
test -n "$generated" && \
func_show_eval "${RM}r$generated"
# Now create the libtool archive.
case $output in
*.la)
old_library=
test "$build_old_libs" = yes && old_library="$libname.$libext"
func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
if eval test -z \"\${$var+set}\"; then
relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
elif eval var_value=\$$var; test -z "$var_value"; then
relink_command="$var=; export $var; $relink_command"
else
func_quote_for_eval "$var_value"
relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
fi
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
# Only create the output if not a dry run.
$opt_dry_run || {
for installed in no yes; do
if test "$installed" = yes; then
if test -z "$install_libdir"; then
break
fi
output="$output_objdir/$outputname"i
# Replace all uninstalled libtool libraries with the installed ones
newdependency_libs=
for deplib in $dependency_libs; do
case $deplib in
*.la)
func_basename "$deplib"
name="$func_basename_result"
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
func_fatal_error "\`$deplib' is not a valid libtool archive"
newdependency_libs="$newdependency_libs $libdir/$name"
;;
*) newdependency_libs="$newdependency_libs $deplib" ;;
esac
done
dependency_libs="$newdependency_libs"
newdlfiles=
for lib in $dlfiles; do
case $lib in
*.la)
func_basename "$lib"
name="$func_basename_result"
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
newdlfiles="$newdlfiles $libdir/$name"
;;
*) newdlfiles="$newdlfiles $lib" ;;
esac
done
dlfiles="$newdlfiles"
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
*.la)
# Only pass preopened files to the pseudo-archive (for
# eventual linking with the app. that links it) if we
# didn't already link the preopened objects directly into
# the library:
func_basename "$lib"
name="$func_basename_result"
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
newdlprefiles="$newdlprefiles $libdir/$name"
;;
esac
done
dlprefiles="$newdlprefiles"
else
newdlfiles=
for lib in $dlfiles; do
case $lib in
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
newdlfiles="$newdlfiles $abs"
done
dlfiles="$newdlfiles"
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
newdlprefiles="$newdlprefiles $abs"
done
dlprefiles="$newdlprefiles"
fi
$RM $output
# place dlname in correct position for cygwin
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
esac
$ECHO > $output "\
# $outputname - a libtool library file
# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# The name that we can dlopen(3).
dlname='$tdlname'
# Names of this library.
library_names='$library_names'
# The name of the static archive.
old_library='$old_library'
# Linker flags that can not go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
# Libraries that this one depends upon.
dependency_libs='$dependency_libs'
# Names of additional weak libraries provided by this library
weak_library_names='$weak_libs'
# Version information for $libname.
current=$current
age=$age
revision=$revision
# Is this an already installed library?
installed=$installed
# Should we warn about portability when linking against -modules?
shouldnotlink=$module
# Files to dlopen/dlpreopen
dlopen='$dlfiles'
dlpreopen='$dlprefiles'
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
if test "$installed" = no && test "$need_relink" = yes; then
$ECHO >> $output "\
relink_command=\"$relink_command\""
fi
done
}
# Do a symbolic link so that the libtool archive can be found in
# LD_LIBRARY_PATH before the program is installed.
func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
;;
esac
exit $EXIT_SUCCESS
}
{ test "$mode" = link || test "$mode" = relink; } &&
func_mode_link ${1+"$@"}
# func_mode_uninstall arg...
func_mode_uninstall ()
{
$opt_debug
RM="$nonopt"
files=
rmforce=
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
libtool_install_magic="$magic"
for arg
do
case $arg in
-f) RM="$RM $arg"; rmforce=yes ;;
-*) RM="$RM $arg" ;;
*) files="$files $arg" ;;
esac
done
test -z "$RM" && \
func_fatal_help "you must specify an RM program"
rmdirs=
origobjdir="$objdir"
for file in $files; do
func_dirname "$file" "" "."
dir="$func_dirname_result"
if test "X$dir" = X.; then
objdir="$origobjdir"
else
objdir="$dir/$origobjdir"
fi
func_basename "$file"
name="$func_basename_result"
test "$mode" = uninstall && objdir="$dir"
# Remember objdir for removal later, being careful to avoid duplicates
if test "$mode" = clean; then
case " $rmdirs " in
*" $objdir "*) ;;
*) rmdirs="$rmdirs $objdir" ;;
esac
fi
# Don't error if the file doesn't exist and rm -f was used.
if { test -L "$file"; } >/dev/null 2>&1 ||
{ test -h "$file"; } >/dev/null 2>&1 ||
test -f "$file"; then
:
elif test -d "$file"; then
exit_status=1
continue
elif test "$rmforce" = yes; then
continue
fi
rmfiles="$file"
case $name in
*.la)
# Possibly a libtool archive, so verify it.
if func_lalib_p "$file"; then
func_source $dir/$name
# Delete the libtool libraries and symlinks.
for n in $library_names; do
rmfiles="$rmfiles $objdir/$n"
done
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
case "$mode" in
clean)
case " $library_names " in
# " " in the beginning catches empty $dlname
*" $dlname "*) ;;
*) rmfiles="$rmfiles $objdir/$dlname" ;;
esac
test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
;;
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
fi
# FIXME: should reinstall the best remaining shared library.
;;
esac
fi
;;
*.lo)
# Possibly a libtool object, so verify it.
if func_lalib_p "$file"; then
# Read the .lo file
func_source $dir/$name
# Add PIC object to the list of files to remove.
if test -n "$pic_object" &&
test "$pic_object" != none; then
rmfiles="$rmfiles $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
if test -n "$non_pic_object" &&
test "$non_pic_object" != none; then
rmfiles="$rmfiles $dir/$non_pic_object"
fi
fi
;;
*)
if test "$mode" = clean ; then
noexename=$name
case $file in
*.exe)
func_stripname '' '.exe' "$file"
file=$func_stripname_result
func_stripname '' '.exe' "$name"
noexename=$func_stripname_result
# $file with .exe has already been added to rmfiles,
# add $file without .exe
rmfiles="$rmfiles $file"
;;
esac
# Do a test to see if this is a libtool program.
if func_ltwrapper_p "$file"; then
if func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
relink_command=
func_source $func_ltwrapper_scriptname_result
rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
else
relink_command=
func_source $dir/$noexename
fi
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
if test "$fast_install" = yes && test -n "$relink_command"; then
rmfiles="$rmfiles $objdir/lt-$name"
fi
if test "X$noexename" != "X$name" ; then
rmfiles="$rmfiles $objdir/lt-${noexename}.c"
fi
fi
fi
;;
esac
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
objdir="$origobjdir"
# Try to remove the ${objdir}s in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
func_show_eval "rmdir $dir >/dev/null 2>&1"
fi
done
exit $exit_status
}
{ test "$mode" = uninstall || test "$mode" = clean; } &&
func_mode_uninstall ${1+"$@"}
test -z "$mode" && {
help="$generic_help"
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
func_fatal_help "invalid operation mode \`$mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
exit $EXIT_FAILURE
fi
exit $exit_status
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# them. This is particularly important on AIX, because we don't
# support having both static and shared libraries enabled at the same
# time on that platform, so we default to a shared-only configuration.
# If a disable-shared tag is given, we'll fallback to a static-only
# configuration. But we'll never go from static-only to shared-only.
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
build_libtool_libs=no
build_old_libs=yes
# ### END LIBTOOL TAG CONFIG: disable-shared
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
# ### END LIBTOOL TAG CONFIG: disable-static
# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:
# vi:sw=2
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ltmain.sh CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / gpl / axl