# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Makefile for Sphinx documentation
#
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = py-axl/doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/conf.py.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = conf.py
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
AXL_VERSION = @AXL_VERSION@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_AF_ARCH_DOC_FALSE = @ENABLE_AF_ARCH_DOC_FALSE@
ENABLE_AF_ARCH_DOC_TRUE = @ENABLE_AF_ARCH_DOC_TRUE@
ENABLE_AXL_BABEL_FALSE = @ENABLE_AXL_BABEL_FALSE@
ENABLE_AXL_BABEL_TRUE = @ENABLE_AXL_BABEL_TRUE@
ENABLE_AXL_KNIFE_FALSE = @ENABLE_AXL_KNIFE_FALSE@
ENABLE_AXL_KNIFE_TRUE = @ENABLE_AXL_KNIFE_TRUE@
ENABLE_AXL_LOG_FALSE = @ENABLE_AXL_LOG_FALSE@
ENABLE_AXL_LOG_TRUE = @ENABLE_AXL_LOG_TRUE@
ENABLE_AXL_NS_FALSE = @ENABLE_AXL_NS_FALSE@
ENABLE_AXL_NS_TRUE = @ENABLE_AXL_NS_TRUE@
ENABLE_AXL_TESTS_FALSE = @ENABLE_AXL_TESTS_FALSE@
ENABLE_AXL_TESTS_TRUE = @ENABLE_AXL_TESTS_TRUE@
ENABLE_PY_AXL_FALSE = @ENABLE_PY_AXL_FALSE@
ENABLE_PY_AXL_TRUE = @ENABLE_PY_AXL_TRUE@
EXARG_FLAGS = @EXARG_FLAGS@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
GREP = @GREP@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
NMEDIT = @NMEDIT@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PYTHON = @PYTHON@
PYTHON_CFLAGS = @PYTHON_CFLAGS@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_INCLUDES = @PYTHON_INCLUDES@
PYTHON_LIBS = @PYTHON_LIBS@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHARED_EXTENSION = @SHARED_EXTENSION@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
# You can set these variables from the command line.
SPHINXOPTS =
SPHINXBUILD = sphinx-build
PAPER =
EXTRA_DIST = py-axl-doc.css conf.py conf.py.in make.bat \
license.rst index.rst \
axl.rst \
doc.rst \
error.rst \
node.rst \
dtd.rst \
attr_cursor.rst
# Internal variables.
PAPEROPT_a4 = -D latex_paper_size=a4
PAPEROPT_letter = -D latex_paper_size=letter
ALLSPHINXOPTS = -d _build/doctrees $(SPHINXOPTS) .
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu py-axl/doc/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu py-axl/doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
conf.py: $(top_builddir)/config.status $(srcdir)/conf.py.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool
dvi: dvi-am
dvi-am:
info: info-am
info-am:
install-data-am:
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-info-am
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-exec install-exec-am \
install-info install-info-am install-man install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
uninstall-info-am
.PHONY: help clean html dirhtml pickle json htmlhelp qthelp latex changes linkcheck doctest
all:
help:
@echo "Please use \`make <target>' where <target> is one of"
@echo " html to make standalone HTML files"
@echo " dirhtml to make HTML files named index.html in directories"
@echo " pickle to make pickle files"
@echo " json to make JSON files"
@echo " htmlhelp to make HTML files and a HTML help project"
@echo " qthelp to make HTML files and a qthelp project"
@echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
@echo " changes to make an overview of all changed/added/deprecated items"
@echo " linkcheck to check all external links for integrity"
@echo " doctest to run all doctests embedded in the documentation (if enabled)"
clean:
-rm -rf _build/*
build_doc: html
html:
$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) _build/html
cp py-axl-doc.css _build/html/_static/
cp ../../doc/aspl-logo.png _build/html/
cp ../../doc/main-page-logo.png _build/html/
@echo
@echo "Build finished. The HTML pages are in _build/html."
dirhtml:
$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) _build/dirhtml
@echo
@echo "Build finished. The HTML pages are in _build/dirhtml."
pickle:
$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) _build/pickle
@echo
@echo "Build finished; now you can process the pickle files."
json:
$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) _build/json
@echo
@echo "Build finished; now you can process the JSON files."
htmlhelp:
$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) _build/htmlhelp
@echo
@echo "Build finished; now you can run HTML Help Workshop with the" \
".hhp project file in _build/htmlhelp."
qthelp:
$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) _build/qthelp
@echo
@echo "Build finished; now you can run "qcollectiongenerator" with the" \
".qhcp project file in _build/qthelp, like this:"
@echo "# qcollectiongenerator _build/qthelp/PyAxl.qhcp"
@echo "To view the help file:"
@echo "# assistant -collectionFile _build/qthelp/PyAxl.qhc"
latex:
$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) _build/latex
@echo
@echo "Build finished; the LaTeX files are in _build/latex."
@echo "Run \`make all-pdf' or \`make all-ps' in that directory to" \
"run these through (pdf)latex."
changes:
$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) _build/changes
@echo
@echo "The overview file is in _build/changes."
linkcheck:
$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) _build/linkcheck
@echo
@echo "Link check complete; look for any errors in the above output " \
"or in _build/linkcheck/output.txt."
doctest:
$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) _build/doctest
@echo "Testing of doctests in the sources finished, look at the " \
"results in _build/doctest/output.txt."
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / gpl / axl / py-axl / doc