--- libaitcfg/configure	2024/10/29 00:56:21	1.30.2.5
+++ libaitcfg/configure	2024/03/18 08:51:40	1.31
@@ -1,11 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.72 for libaitcfg 9.5.
+# Generated by GNU Autoconf 2.71 for libaitcfg 9.5.
 #
 # Report bugs to <misho@elwix.org>.
 #
 #
-# Copyright (C) 1992-1996, 1998-2017, 2020-2023 Free Software Foundation,
+# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
 # Inc.
 #
 #
@@ -17,6 +17,7 @@
 
 # Be more Bourne compatible
 DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
 if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
 then :
   emulate sh
@@ -25,13 +26,12 @@ then :
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
-else case e in #(
-  e) case `(set -o) 2>/dev/null` in #(
+else $as_nop
+  case `(set -o) 2>/dev/null` in #(
   *posix*) :
     set -o posix ;; #(
   *) :
      ;;
-esac ;;
 esac
 fi
 
@@ -103,7 +103,7 @@ IFS=$as_save_IFS
 
      ;;
 esac
-# We did not find ourselves, most probably we were run as 'sh COMMAND'
+# We did not find ourselves, most probably we were run as `sh COMMAND'
 # in which case we are not to be found in the path.
 if test "x$as_myself" = x; then
   as_myself=$0
@@ -133,14 +133,15 @@ case $- in # ((((
 esac
 exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
 # Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed 'exec'.
+# out after a failed `exec'.
 printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
 exit 255
   fi
   # We don't want this to propagate to other subprocesses.
           { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+  as_bourne_compatible="as_nop=:
+if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
 then :
   emulate sh
   NULLCMD=:
@@ -148,13 +149,12 @@ then :
   # is contrary to our usage.  Disable this feature.
   alias -g '\${1+\"\$@\"}'='\"\$@\"'
   setopt NO_GLOB_SUBST
-else case e in #(
-  e) case \`(set -o) 2>/dev/null\` in #(
+else \$as_nop
+  case \`(set -o) 2>/dev/null\` in #(
   *posix*) :
     set -o posix ;; #(
   *) :
      ;;
-esac ;;
 esac
 fi
 "
@@ -172,9 +172,8 @@ as_fn_ret_failure && { exitcode=1; echo as_fn_ret_fail
 if ( set x; as_fn_ret_success y && test x = \"\$1\" )
 then :
 
-else case e in #(
-  e) exitcode=1; echo positional parameters were not saved. ;;
-esac
+else \$as_nop
+  exitcode=1; echo positional parameters were not saved.
 fi
 test x\$exitcode = x0 || exit 1
 blah=\$(echo \$(echo blah))
@@ -187,15 +186,14 @@ test -x / || exit 1"
   if (eval "$as_required") 2>/dev/null
 then :
   as_have_required=yes
-else case e in #(
-  e) as_have_required=no ;;
-esac
+else $as_nop
+  as_have_required=no
 fi
   if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null
 then :
 
-else case e in #(
-  e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 as_found=false
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
@@ -228,14 +226,13 @@ IFS=$as_save_IFS
 if $as_found
 then :
 
-else case e in #(
-  e) if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+else $as_nop
+  if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
 	      as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null
 then :
   CONFIG_SHELL=$SHELL as_have_required=yes
-fi ;;
-esac
 fi
+fi
 
 
       if test "x$CONFIG_SHELL" != x
@@ -256,7 +253,7 @@ case $- in # ((((
 esac
 exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
 # Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed 'exec'.
+# out after a failed `exec'.
 printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
 exit 255
 fi
@@ -276,10 +273,9 @@ $0: manually run the script under such a shell if you 
 $0: have one."
   fi
   exit 1
-fi ;;
-esac
 fi
 fi
+fi
 SHELL=${CONFIG_SHELL-/bin/sh}
 export SHELL
 # Unset more variables known to interfere with behavior of common tools.
@@ -316,6 +312,14 @@ as_fn_exit ()
   as_fn_set_status $1
   exit $1
 } # as_fn_exit
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
 
 # as_fn_mkdir_p
 # -------------
@@ -384,12 +388,11 @@ then :
   {
     eval $1+=\$2
   }'
-else case e in #(
-  e) as_fn_append ()
+else $as_nop
+  as_fn_append ()
   {
     eval $1=\$$1\$2
-  } ;;
-esac
+  }
 fi # as_fn_append
 
 # as_fn_arith ARG...
@@ -403,14 +406,21 @@ then :
   {
     as_val=$(( $* ))
   }'
-else case e in #(
-  e) as_fn_arith ()
+else $as_nop
+  as_fn_arith ()
   {
     as_val=`expr "$@" || test $? -eq 1`
-  } ;;
-esac
+  }
 fi # as_fn_arith
 
+# as_fn_nop
+# ---------
+# Do nothing but, unlike ":", preserve the value of $?.
+as_fn_nop ()
+{
+  return $?
+}
+as_nop=as_fn_nop
 
 # as_fn_error STATUS ERROR [LINENO LOG_FD]
 # ----------------------------------------
@@ -484,8 +494,6 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
     /[$]LINENO/=
   ' <$as_myself |
     sed '
-      t clear
-      :clear
       s/[$]LINENO.*/&-/
       t lineno
       b
@@ -534,6 +542,7 @@ esac
 as_echo='printf %s\n'
 as_echo_n='printf %s'
 
+
 rm -f conf$$ conf$$.exe conf$$.file
 if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
@@ -545,9 +554,9 @@ if (echo >conf$$.file) 2>/dev/null; then
   if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
     # ... but there are two gotchas:
-    # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable.
-    # In both cases, we have to default to 'cp -pR'.
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
       as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
@@ -572,12 +581,10 @@ as_test_x='test -x'
 as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
-as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 
 # Sed expression to map a string onto a valid variable name.
-as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-as_tr_sh="eval sed '$as_sed_sh'" # deprecated
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
 test -n "$DJDIR" || exec 7<&0 </dev/null
@@ -609,40 +616,7 @@ PACKAGE_BUGREPORT='misho@elwix.org'
 PACKAGE_URL=''
 
 ac_unique_file="src/aitcfg.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stddef.h>
-#ifdef HAVE_STDIO_H
-# include <stdio.h>
-#endif
-#ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-#ifdef HAVE_STRING_H
-# include <string.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_header_c_list=
 ac_subst_vars='LTLIBOBJS
-DEBIAN_ARCH
 LIBOBJS
 MKDEP
 target_os
@@ -828,7 +802,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: '$ac_useropt'"
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -854,7 +828,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: '$ac_useropt'"
+      as_fn_error $? "invalid feature name: \`$ac_useropt'"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1067,7 +1041,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: '$ac_useropt'"
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1083,7 +1057,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: '$ac_useropt'"
+      as_fn_error $? "invalid package name: \`$ac_useropt'"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1113,8 +1087,8 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) as_fn_error $? "unrecognized option: '$ac_option'
-Try '$0 --help' for more information"
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
     ;;
 
   *=*)
@@ -1122,7 +1096,7 @@ Try '$0 --help' for more information"
     # Reject names that are not valid shell variable names.
     case $ac_envvar in #(
       '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: '$ac_envvar'" ;;
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
     esac
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
@@ -1172,7 +1146,7 @@ do
   as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
-# There might be people who depend on the old broken behavior: '$host'
+# There might be people who depend on the old broken behavior: `$host'
 # used to hold the argument of --host etc.
 # FIXME: To remove some day.
 build=$build_alias
@@ -1240,7 +1214,7 @@ if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
   as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
 fi
-ac_msg="sources are in $srcdir, but 'cd $srcdir' does not work"
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
 	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
 	pwd)`
@@ -1268,7 +1242,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-'configure' configures libaitcfg 9.5 to adapt to many kinds of systems.
+\`configure' configures libaitcfg 9.5 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1282,11 +1256,11 @@ Configuration:
       --help=short        display options specific to this package
       --help=recursive    display the short help of all the included packages
   -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print 'checking ...' messages
+  -q, --quiet, --silent   do not print \`checking ...' messages
       --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for '--cache-file=config.cache'
+  -C, --config-cache      alias for \`--cache-file=config.cache'
   -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or '..']
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -1294,10 +1268,10 @@ Installation directories:
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                           [PREFIX]
 
-By default, 'make install' will install all the files in
-'$ac_default_prefix/bin', '$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than '$ac_default_prefix' using '--prefix',
-for instance '--prefix=\$HOME'.
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
 
 For better control, use the options below.
 
@@ -1354,7 +1328,7 @@ Some influential environment variables:
   CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
               you have headers in a nonstandard directory <include dir>
 
-Use these variables to override the choices made by 'configure' or to help
+Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
 Report bugs to <misho@elwix.org>.
@@ -1422,9 +1396,9 @@ test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 libaitcfg configure 9.5
-generated by GNU Autoconf 2.72
+generated by GNU Autoconf 2.71
 
-Copyright (C) 2023 Free Software Foundation, Inc.
+Copyright (C) 2021 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1463,12 +1437,11 @@ printf "%s\n" "$ac_try_echo"; } >&5
        } && test -s conftest.$ac_objext
 then :
   ac_retval=0
-else case e in #(
-  e) printf "%s\n" "$as_me: failed program was:" >&5
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_retval=1 ;;
-esac
+	ac_retval=1
 fi
   eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
@@ -1506,12 +1479,11 @@ printf "%s\n" "$ac_try_echo"; } >&5
        }
 then :
   ac_retval=0
-else case e in #(
-  e) printf "%s\n" "$as_me: failed program was:" >&5
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_retval=1 ;;
-esac
+	ac_retval=1
 fi
   # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
   # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
@@ -1523,41 +1495,6 @@ fi
 
 } # ac_fn_c_try_link
 
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-printf %s "checking for $2... " >&6; }
-if eval test \${$3+y}
-then :
-  printf %s "(cached) " >&6
-else case e in #(
-  e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"
-then :
-  eval "$3=yes"
-else case e in #(
-  e) eval "$3=no" ;;
-esac
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;;
-esac
-fi
-eval ac_res=\$$3
-	       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-printf "%s\n" "$ac_res" >&6; }
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_compile
-
 # ac_fn_c_try_run LINENO
 # ----------------------
 # Try to run conftest.$ac_ext, and return whether this succeeded. Assumes that
@@ -1588,13 +1525,12 @@ printf "%s\n" "$ac_try_echo"; } >&5
   test $ac_status = 0; }; }
 then :
   ac_retval=0
-else case e in #(
-  e) printf "%s\n" "$as_me: program exited with status $ac_status" >&5
+else $as_nop
+  printf "%s\n" "$as_me: program exited with status $ac_status" >&5
        printf "%s\n" "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-       ac_retval=$ac_status ;;
-esac
+       ac_retval=$ac_status
 fi
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
   eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
@@ -1613,15 +1549,15 @@ printf %s "checking for $2... " >&6; }
 if eval test \${$3+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 /* Define $2 to an innocuous variant, in case <limits.h> declares $2.
    For example, HP-UX 11i <limits.h> declares gettimeofday.  */
 #define $2 innocuous_$2
 
 /* System header to define __stub macros and hopefully few prototypes,
-   which can conflict with char $2 (void); below.  */
+   which can conflict with char $2 (); below.  */
 
 #include <limits.h>
 #undef $2
@@ -1632,7 +1568,7 @@ else case e in #(
 #ifdef __cplusplus
 extern "C"
 #endif
-char $2 (void);
+char $2 ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
@@ -1651,13 +1587,11 @@ _ACEOF
 if ac_fn_c_try_link "$LINENO"
 then :
   eval "$3=yes"
-else case e in #(
-  e) eval "$3=no" ;;
-esac
+else $as_nop
+  eval "$3=no"
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.beam \
-    conftest$ac_exeext conftest.$ac_ext ;;
-esac
+    conftest$ac_exeext conftest.$ac_ext
 fi
 eval ac_res=\$$3
 	       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
@@ -1690,7 +1624,7 @@ This file contains any messages produced by compilers 
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by libaitcfg $as_me 9.5, which was
-generated by GNU Autoconf 2.72.  Invocation command line was
+generated by GNU Autoconf 2.71.  Invocation command line was
 
   $ $0$ac_configure_args_raw
 
@@ -1936,10 +1870,10 @@ esac
 printf "%s\n" "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file" \
-      || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5
-printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;}
+      || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "failed to load site script $ac_site_file
-See 'config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5; }
   fi
 done
 
@@ -1975,7 +1909,9 @@ struct stat;
 /* Most of the following tests are stolen from RCS 5.7 src/conf.sh.  */
 struct buf { int x; };
 struct buf * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (char **p, int i)
+static char *e (p, i)
+     char **p;
+     int i;
 {
   return p[i];
 }
@@ -1989,21 +1925,6 @@ static char *f (char * (*g) (char **, int), char **p, 
   return s;
 }
 
-/* C89 style stringification. */
-#define noexpand_stringify(a) #a
-const char *stringified = noexpand_stringify(arbitrary+token=sequence);
-
-/* C89 style token pasting.  Exercises some of the corner cases that
-   e.g. old MSVC gets wrong, but not very hard. */
-#define noexpand_concat(a,b) a##b
-#define expand_concat(a,b) noexpand_concat(a,b)
-extern int vA;
-extern int vbee;
-#define aye A
-#define bee B
-int *pvA = &expand_concat(v,aye);
-int *pvbee = &noexpand_concat(v,bee);
-
 /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
    function prototypes and stuff, but not \xHH hex character constants.
    These do not provoke an error unfortunately, instead are silently treated
@@ -2031,19 +1952,16 @@ ok |= (argc == 0 || f (e, argv, 0) != argv[0] || f (e,
 
 # Test code for whether the C compiler supports C99 (global declarations)
 ac_c_conftest_c99_globals='
-/* Does the compiler advertise C99 conformance? */
+// Does the compiler advertise C99 conformance?
 #if !defined __STDC_VERSION__ || __STDC_VERSION__ < 199901L
 # error "Compiler does not advertise C99 conformance"
 #endif
 
-// See if C++-style comments work.
-
 #include <stdbool.h>
 extern int puts (const char *);
 extern int printf (const char *, ...);
 extern int dprintf (int, const char *, ...);
 extern void *malloc (size_t);
-extern void free (void *);
 
 // Check varargs macros.  These examples are taken from C99 6.10.3.5.
 // dprintf is used instead of fprintf to avoid needing to declare
@@ -2093,6 +2011,7 @@ typedef const char *ccp;
 static inline int
 test_restrict (ccp restrict text)
 {
+  // See if C++-style comments work.
   // Iterate through items via the restricted pointer.
   // Also check for declarations in for loops.
   for (unsigned int i = 0; *(text+i) != '\''\0'\''; ++i)
@@ -2158,8 +2077,6 @@ ac_c_conftest_c99_main='
   ia->datasize = 10;
   for (int i = 0; i < ia->datasize; ++i)
     ia->data[i] = i * 1.234;
-  // Work around memory leak warnings.
-  free (ia);
 
   // Check named initializers.
   struct named_init ni = {
@@ -2181,7 +2098,7 @@ ac_c_conftest_c99_main='
 
 # Test code for whether the C compiler supports C11 (global declarations)
 ac_c_conftest_c11_globals='
-/* Does the compiler advertise C11 conformance? */
+// Does the compiler advertise C11 conformance?
 #if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
 # error "Compiler does not advertise C11 conformance"
 #endif
@@ -2285,15 +2202,6 @@ main (int argc, char **argv)
 }
 "
 
-as_fn_append ac_header_c_list " stdio.h stdio_h HAVE_STDIO_H"
-as_fn_append ac_header_c_list " stdlib.h stdlib_h HAVE_STDLIB_H"
-as_fn_append ac_header_c_list " string.h string_h HAVE_STRING_H"
-as_fn_append ac_header_c_list " inttypes.h inttypes_h HAVE_INTTYPES_H"
-as_fn_append ac_header_c_list " stdint.h stdint_h HAVE_STDINT_H"
-as_fn_append ac_header_c_list " strings.h strings_h HAVE_STRINGS_H"
-as_fn_append ac_header_c_list " sys/stat.h sys_stat_h HAVE_SYS_STAT_H"
-as_fn_append ac_header_c_list " sys/types.h sys_types_h HAVE_SYS_TYPES_H"
-as_fn_append ac_header_c_list " unistd.h unistd_h HAVE_UNISTD_H"
 
 # Auxiliary files required by this configure script.
 ac_aux_files="config.guess config.sub install-sh"
@@ -2373,9 +2281,8 @@ IFS=$as_save_IFS
 if $as_found
 then :
 
-else case e in #(
-  e) as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 ;;
-esac
+else $as_nop
+  as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5
 fi
 
 
@@ -2403,12 +2310,12 @@ for ac_var in $ac_precious_vars; do
   eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&5
-printf "%s\n" "$as_me: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&2;}
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+printf "%s\n" "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was not set in the previous run" >&5
-printf "%s\n" "$as_me: error: '$ac_var' was not set in the previous run" >&2;}
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+printf "%s\n" "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
@@ -2417,18 +2324,18 @@ printf "%s\n" "$as_me: error: '$ac_var' was not set in
 	ac_old_val_w=`echo x $ac_old_val`
 	ac_new_val_w=`echo x $ac_new_val`
 	if test "$ac_old_val_w" != "$ac_new_val_w"; then
-	  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' has changed since the previous run:" >&5
-printf "%s\n" "$as_me: error: '$ac_var' has changed since the previous run:" >&2;}
+	  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+printf "%s\n" "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
 	  ac_cache_corrupted=:
 	else
-	  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&5
-printf "%s\n" "$as_me: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&2;}
+	  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+printf "%s\n" "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
 	  eval $ac_var=\$ac_old_val
 	fi
-	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}:   former value:  '$ac_old_val'" >&5
-printf "%s\n" "$as_me:   former value:  '$ac_old_val'" >&2;}
-	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}:   current value: '$ac_new_val'" >&5
-printf "%s\n" "$as_me:   current value: '$ac_new_val'" >&2;}
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+printf "%s\n" "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ printf "%s\n" "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+printf "%s\n" "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
@@ -2444,11 +2351,11 @@ printf "%s\n" "$as_me:   current value: '$ac_new_val'"
   fi
 done
 if $ac_cache_corrupted; then
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5
-printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;}
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
 printf "%s\n" "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run '${MAKE-make} distclean' and/or 'rm $cache_file'
+  as_fn_error $? "run \`${MAKE-make} distclean' and/or \`rm $cache_file'
 	    and start over" "$LINENO" 5
 fi
 ## -------------------- ##
@@ -2492,8 +2399,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_CC+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$CC"; then
+else $as_nop
+  if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2515,9 +2422,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
@@ -2538,8 +2444,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_ac_ct_CC+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$ac_ct_CC"; then
+else $as_nop
+  if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2561,9 +2467,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
@@ -2597,8 +2502,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_CC+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$CC"; then
+else $as_nop
+  if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2620,9 +2525,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
@@ -2643,8 +2547,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_CC+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$CC"; then
+else $as_nop
+  if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
   ac_prog_rejected=no
@@ -2683,9 +2587,8 @@ if test $ac_prog_rejected = yes; then
     ac_cv_prog_CC="$as_dir$ac_word${1+' '}$@"
   fi
 fi
-fi ;;
-esac
 fi
+fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
@@ -2708,8 +2611,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_CC+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$CC"; then
+else $as_nop
+  if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2731,9 +2634,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
@@ -2758,8 +2660,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_ac_ct_CC+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$ac_ct_CC"; then
+else $as_nop
+  if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2781,9 +2683,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
@@ -2820,8 +2721,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_CC+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$CC"; then
+else $as_nop
+  if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2843,9 +2744,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
@@ -2866,8 +2766,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_ac_ct_CC+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$ac_ct_CC"; then
+else $as_nop
+  if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2889,9 +2789,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
@@ -2919,10 +2818,10 @@ fi
 fi
 
 
-test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5
-printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;}
+test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "no acceptable C compiler found in \$PATH
-See 'config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5; }
 
 # Provide some information about the compiler.
 printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -2994,8 +2893,8 @@ printf "%s\n" "$ac_try_echo"; } >&5
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
 then :
-  # Autoconf-2.13 could set the ac_cv_exeext variable to 'no'.
-# So ignore a value of 'no', otherwise this would lead to 'EXEEXT = no'
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
 # in a Makefile.  We should not override ac_cv_exeext if it was cached,
 # so that the user can short-circuit this test for compilers unknown to
 # Autoconf.
@@ -3015,7 +2914,7 @@ do
 	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
 	fi
 	# We set ac_cv_exeext here because the later test for it is not
-	# safe: cross compilers may not add the suffix if given an '-o'
+	# safe: cross compilers may not add the suffix if given an `-o'
 	# argument, so we may need to know it at that point already.
 	# Even if this section looks crufty: it has the advantage of
 	# actually working.
@@ -3026,9 +2925,8 @@ do
 done
 test "$ac_cv_exeext" = no && ac_cv_exeext=
 
-else case e in #(
-  e) ac_file='' ;;
-esac
+else $as_nop
+  ac_file=''
 fi
 if test -z "$ac_file"
 then :
@@ -3037,14 +2935,13 @@ printf "%s\n" "no" >&6; }
 printf "%s\n" "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5
-printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;}
+{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error 77 "C compiler cannot create executables
-See 'config.log' for more details" "$LINENO" 5; }
-else case e in #(
-  e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-printf "%s\n" "yes" >&6; } ;;
-esac
+See \`config.log' for more details" "$LINENO" 5; }
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
 printf %s "checking for C compiler default output file name... " >&6; }
@@ -3068,10 +2965,10 @@ printf "%s\n" "$ac_try_echo"; } >&5
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
 then :
-  # If both 'conftest.exe' and 'conftest' are 'present' (well, observable)
-# catch 'conftest.exe'.  For instance with Cygwin, 'ls conftest' will
-# work properly (i.e., refer to 'conftest.exe'), while it won't with
-# 'rm'.
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
@@ -3081,12 +2978,11 @@ for ac_file in conftest.exe conftest conftest.*; do
     * ) break;;
   esac
 done
-else case e in #(
-  e) { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5
-printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;}
+else $as_nop
+  { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See 'config.log' for more details" "$LINENO" 5; } ;;
-esac
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest conftest$ac_cv_exeext
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3102,8 +2998,6 @@ int
 main (void)
 {
 FILE *f = fopen ("conftest.out", "w");
- if (!f)
-  return 1;
  return ferror (f) || fclose (f) != 0;
 
   ;
@@ -3143,27 +3037,26 @@ printf "%s\n" "$ac_try_echo"; } >&5
     if test "$cross_compiling" = maybe; then
 	cross_compiling=yes
     else
-	{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5
-printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;}
+	{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error 77 "cannot run C compiled programs.
-If you meant to cross compile, use '--host'.
-See 'config.log' for more details" "$LINENO" 5; }
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
     fi
   fi
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
 printf "%s\n" "$cross_compiling" >&6; }
 
-rm -f conftest.$ac_ext conftest$ac_cv_exeext \
-  conftest.o conftest.obj conftest.out
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
 ac_clean_files=$ac_clean_files_save
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
 printf %s "checking for suffix of object files... " >&6; }
 if test ${ac_cv_objext+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3195,18 +3088,16 @@ then :
        break;;
   esac
 done
-else case e in #(
-  e) printf "%s\n" "$as_me: failed program was:" >&5
+else $as_nop
+  printf "%s\n" "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5
-printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;}
+{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of object files: cannot compile
-See 'config.log' for more details" "$LINENO" 5; } ;;
-esac
+See \`config.log' for more details" "$LINENO" 5; }
 fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext ;;
-esac
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
 printf "%s\n" "$ac_cv_objext" >&6; }
@@ -3217,8 +3108,8 @@ printf %s "checking whether the compiler supports GNU 
 if test ${ac_cv_c_compiler_gnu+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3235,14 +3126,12 @@ _ACEOF
 if ac_fn_c_try_compile "$LINENO"
 then :
   ac_compiler_gnu=yes
-else case e in #(
-  e) ac_compiler_gnu=no ;;
-esac
+else $as_nop
+  ac_compiler_gnu=no
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
- ;;
-esac
+
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
 printf "%s\n" "$ac_cv_c_compiler_gnu" >&6; }
@@ -3260,8 +3149,8 @@ printf %s "checking whether $CC accepts -g... " >&6; }
 if test ${ac_cv_prog_cc_g+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) ac_save_c_werror_flag=$ac_c_werror_flag
+else $as_nop
+  ac_save_c_werror_flag=$ac_c_werror_flag
    ac_c_werror_flag=yes
    ac_cv_prog_cc_g=no
    CFLAGS="-g"
@@ -3279,8 +3168,8 @@ _ACEOF
 if ac_fn_c_try_compile "$LINENO"
 then :
   ac_cv_prog_cc_g=yes
-else case e in #(
-  e) CFLAGS=""
+else $as_nop
+  CFLAGS=""
       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
@@ -3295,8 +3184,8 @@ _ACEOF
 if ac_fn_c_try_compile "$LINENO"
 then :
 
-else case e in #(
-  e) ac_c_werror_flag=$ac_save_c_werror_flag
+else $as_nop
+  ac_c_werror_flag=$ac_save_c_werror_flag
 	 CFLAGS="-g"
 	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
@@ -3313,15 +3202,12 @@ if ac_fn_c_try_compile "$LINENO"
 then :
   ac_cv_prog_cc_g=yes
 fi
-rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;;
-esac
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
-rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;;
-esac
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag ;;
-esac
+   ac_c_werror_flag=$ac_save_c_werror_flag
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
 printf "%s\n" "$ac_cv_prog_cc_g" >&6; }
@@ -3348,8 +3234,8 @@ printf %s "checking for $CC option to enable C11 featu
 if test ${ac_cv_prog_cc_c11+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) ac_cv_prog_cc_c11=no
+else $as_nop
+  ac_cv_prog_cc_c11=no
 ac_save_CC=$CC
 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
@@ -3366,28 +3252,25 @@ rm -f core conftest.err conftest.$ac_objext conftest.b
   test "x$ac_cv_prog_cc_c11" != "xno" && break
 done
 rm -f conftest.$ac_ext
-CC=$ac_save_CC ;;
-esac
+CC=$ac_save_CC
 fi
 
 if test "x$ac_cv_prog_cc_c11" = xno
 then :
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
 printf "%s\n" "unsupported" >&6; }
-else case e in #(
-  e) if test "x$ac_cv_prog_cc_c11" = x
+else $as_nop
+  if test "x$ac_cv_prog_cc_c11" = x
 then :
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
 printf "%s\n" "none needed" >&6; }
-else case e in #(
-  e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5
 printf "%s\n" "$ac_cv_prog_cc_c11" >&6; }
-     CC="$CC $ac_cv_prog_cc_c11" ;;
-esac
+     CC="$CC $ac_cv_prog_cc_c11"
 fi
   ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c11
-  ac_prog_cc_stdc=c11 ;;
-esac
+  ac_prog_cc_stdc=c11
 fi
 fi
 if test x$ac_prog_cc_stdc = xno
@@ -3397,8 +3280,8 @@ printf %s "checking for $CC option to enable C99 featu
 if test ${ac_cv_prog_cc_c99+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) ac_cv_prog_cc_c99=no
+else $as_nop
+  ac_cv_prog_cc_c99=no
 ac_save_CC=$CC
 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
@@ -3415,28 +3298,25 @@ rm -f core conftest.err conftest.$ac_objext conftest.b
   test "x$ac_cv_prog_cc_c99" != "xno" && break
 done
 rm -f conftest.$ac_ext
-CC=$ac_save_CC ;;
-esac
+CC=$ac_save_CC
 fi
 
 if test "x$ac_cv_prog_cc_c99" = xno
 then :
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
 printf "%s\n" "unsupported" >&6; }
-else case e in #(
-  e) if test "x$ac_cv_prog_cc_c99" = x
+else $as_nop
+  if test "x$ac_cv_prog_cc_c99" = x
 then :
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
 printf "%s\n" "none needed" >&6; }
-else case e in #(
-  e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
 printf "%s\n" "$ac_cv_prog_cc_c99" >&6; }
-     CC="$CC $ac_cv_prog_cc_c99" ;;
-esac
+     CC="$CC $ac_cv_prog_cc_c99"
 fi
   ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99
-  ac_prog_cc_stdc=c99 ;;
-esac
+  ac_prog_cc_stdc=c99
 fi
 fi
 if test x$ac_prog_cc_stdc = xno
@@ -3446,8 +3326,8 @@ printf %s "checking for $CC option to enable C89 featu
 if test ${ac_cv_prog_cc_c89+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) ac_cv_prog_cc_c89=no
+else $as_nop
+  ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
@@ -3464,28 +3344,25 @@ rm -f core conftest.err conftest.$ac_objext conftest.b
   test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
 rm -f conftest.$ac_ext
-CC=$ac_save_CC ;;
-esac
+CC=$ac_save_CC
 fi
 
 if test "x$ac_cv_prog_cc_c89" = xno
 then :
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
 printf "%s\n" "unsupported" >&6; }
-else case e in #(
-  e) if test "x$ac_cv_prog_cc_c89" = x
+else $as_nop
+  if test "x$ac_cv_prog_cc_c89" = x
 then :
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
 printf "%s\n" "none needed" >&6; }
-else case e in #(
-  e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+else $as_nop
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
 printf "%s\n" "$ac_cv_prog_cc_c89" >&6; }
-     CC="$CC $ac_cv_prog_cc_c89" ;;
-esac
+     CC="$CC $ac_cv_prog_cc_c89"
 fi
   ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89
-  ac_prog_cc_stdc=c89 ;;
-esac
+  ac_prog_cc_stdc=c89
 fi
 fi
 
@@ -3517,8 +3394,8 @@ if test -z "$INSTALL"; then
 if test ${ac_cv_path_install+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+else $as_nop
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
@@ -3572,8 +3449,7 @@ esac
 IFS=$as_save_IFS
 
 rm -rf conftest.one conftest.two conftest.dir
- ;;
-esac
+
 fi
   if test ${ac_cv_path_install+y}; then
     INSTALL=$ac_cv_path_install
@@ -3604,8 +3480,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_RANLIB+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$RANLIB"; then
+else $as_nop
+  if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -3627,9 +3503,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
@@ -3650,8 +3525,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_ac_ct_RANLIB+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$ac_ct_RANLIB"; then
+else $as_nop
+  if test -n "$ac_ct_RANLIB"; then
   ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -3673,9 +3548,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
@@ -3712,16 +3586,15 @@ printf %s "checking build system type... " >&6; }
 if test ${ac_cv_build+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) ac_build_alias=$build_alias
+else $as_nop
+  ac_build_alias=$build_alias
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "${ac_aux_dir}config.guess"`
 test "x$ac_build_alias" = x &&
   as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
 ac_cv_build=`$SHELL "${ac_aux_dir}config.sub" $ac_build_alias` ||
   as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $ac_build_alias failed" "$LINENO" 5
- ;;
-esac
+
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
 printf "%s\n" "$ac_cv_build" >&6; }
@@ -3748,15 +3621,14 @@ printf %s "checking host system type... " >&6; }
 if test ${ac_cv_host+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test "x$host_alias" = x; then
+else $as_nop
+  if test "x$host_alias" = x; then
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "${ac_aux_dir}config.sub" $host_alias` ||
     as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $host_alias failed" "$LINENO" 5
 fi
- ;;
-esac
+
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
 printf "%s\n" "$ac_cv_host" >&6; }
@@ -3783,15 +3655,14 @@ printf %s "checking target system type... " >&6; }
 if test ${ac_cv_target+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test "x$target_alias" = x; then
+else $as_nop
+  if test "x$target_alias" = x; then
   ac_cv_target=$ac_cv_host
 else
   ac_cv_target=`$SHELL "${ac_aux_dir}config.sub" $target_alias` ||
     as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $target_alias failed" "$LINENO" 5
 fi
- ;;
-esac
+
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
 printf "%s\n" "$ac_cv_target" >&6; }
@@ -3828,8 +3699,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_MKDEP+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$MKDEP"; then
+else $as_nop
+  if test -n "$MKDEP"; then
   ac_cv_prog_MKDEP="$MKDEP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -3851,9 +3722,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 MKDEP=$ac_cv_prog_MKDEP
 if test -n "$MKDEP"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $MKDEP" >&5
@@ -3874,8 +3744,8 @@ printf %s "checking for $ac_word... " >&6; }
 if test ${ac_cv_prog_ac_ct_MKDEP+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test -n "$ac_ct_MKDEP"; then
+else $as_nop
+  if test -n "$ac_ct_MKDEP"; then
   ac_cv_prog_ac_ct_MKDEP="$ac_ct_MKDEP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -3897,9 +3767,8 @@ done
   done
 IFS=$as_save_IFS
 
-fi ;;
-esac
 fi
+fi
 ac_ct_MKDEP=$ac_cv_prog_ac_ct_MKDEP
 if test -n "$ac_ct_MKDEP"; then
   { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MKDEP" >&5
@@ -3926,25 +3795,9 @@ fi
 
 
 
-if test x"${prefix}" = x"NONE"; then
-	prefix="/usr/local"
-fi
-if test x"${exec_prefix}" = x"NONE"; then
-	exec_prefix=${prefix}
-fi
+CFLAGS="-Wall -O2 -fPIC ${CFLAGS}"
+LDFLAGS="${LDFLAGS}"
 
-if test "${ac_cv_env_CFLAGS_set}" != "set"; then
-	CFLAGS="-Wall -O2 -I${includedir}"
-else
-	CFLAGS="${ac_cv_env_CFLAGS_value}"
-fi
-if test "${ac_cv_env_LDFLAGS_set}" = "set"; then
-	LDFLAGS="${ac_cv_env_LDFLAGS_value}"
-else
-	LDFLAGS="-L$(eval echo ${libdir})"
-fi
-
-
 # Checks for libraries.
 
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_lock in -lpthread" >&5
@@ -3952,22 +3805,16 @@ printf %s "checking for pthread_mutex_lock in -lpthrea
 if test ${ac_cv_lib_pthread_pthread_mutex_lock+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) ac_check_lib_save_LIBS=$LIBS
+else $as_nop
+  ac_check_lib_save_LIBS=$LIBS
 LIBS="-lpthread  $LIBS"
 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
    Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.
-   The 'extern "C"' is for builds by C++ compilers;
-   although this is not generally supported in C code supporting it here
-   has little cost and some practical benefit (sr 110532).  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_mutex_lock (void);
+   builtin and then its argument prototype would still apply.  */
+char pthread_mutex_lock ();
 int
 main (void)
 {
@@ -3979,14 +3826,12 @@ _ACEOF
 if ac_fn_c_try_link "$LINENO"
 then :
   ac_cv_lib_pthread_pthread_mutex_lock=yes
-else case e in #(
-  e) ac_cv_lib_pthread_pthread_mutex_lock=no ;;
-esac
+else $as_nop
+  ac_cv_lib_pthread_pthread_mutex_lock=no
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.beam \
     conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS ;;
-esac
+LIBS=$ac_check_lib_save_LIBS
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_mutex_lock" >&5
 printf "%s\n" "$ac_cv_lib_pthread_pthread_mutex_lock" >&6; }
@@ -4003,22 +3848,16 @@ printf %s "checking for str_Trim in -lelwix... " >&6; 
 if test ${ac_cv_lib_elwix_str_Trim+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) ac_check_lib_save_LIBS=$LIBS
+else $as_nop
+  ac_check_lib_save_LIBS=$LIBS
 LIBS="-lelwix  $LIBS"
 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
    Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.
-   The 'extern "C"' is for builds by C++ compilers;
-   although this is not generally supported in C code supporting it here
-   has little cost and some practical benefit (sr 110532).  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char str_Trim (void);
+   builtin and then its argument prototype would still apply.  */
+char str_Trim ();
 int
 main (void)
 {
@@ -4030,14 +3869,12 @@ _ACEOF
 if ac_fn_c_try_link "$LINENO"
 then :
   ac_cv_lib_elwix_str_Trim=yes
-else case e in #(
-  e) ac_cv_lib_elwix_str_Trim=no ;;
-esac
+else $as_nop
+  ac_cv_lib_elwix_str_Trim=no
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.beam \
     conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS ;;
-esac
+LIBS=$ac_check_lib_save_LIBS
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_elwix_str_Trim" >&5
 printf "%s\n" "$ac_cv_lib_elwix_str_Trim" >&6; }
@@ -4051,76 +3888,15 @@ fi
 
 
 # Checks for header files.
-ac_header= ac_cache=
-for ac_item in $ac_header_c_list
-do
-  if test $ac_cache; then
-    ac_fn_c_check_header_compile "$LINENO" $ac_header ac_cv_header_$ac_cache "$ac_includes_default"
-    if eval test \"x\$ac_cv_header_$ac_cache\" = xyes; then
-      printf "%s\n" "#define $ac_item 1" >> confdefs.h
-    fi
-    ac_header= ac_cache=
-  elif test $ac_header; then
-    ac_cache=$ac_item
-  else
-    ac_header=$ac_item
-  fi
-done
 
-
-
-
-
-
-
-
-if test $ac_cv_header_stdlib_h = yes && test $ac_cv_header_string_h = yes
-then :
-
-printf "%s\n" "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-ac_fn_c_check_header_compile "$LINENO" "stdint.h" "ac_cv_header_stdint_h" "$ac_includes_default"
-if test "x$ac_cv_header_stdint_h" = xyes
-then :
-  printf "%s\n" "#define HAVE_STDINT_H 1" >>confdefs.h
-
-fi
-ac_fn_c_check_header_compile "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_stdlib_h" = xyes
-then :
-  printf "%s\n" "#define HAVE_STDLIB_H 1" >>confdefs.h
-
-fi
-ac_fn_c_check_header_compile "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default"
-if test "x$ac_cv_header_string_h" = xyes
-then :
-  printf "%s\n" "#define HAVE_STRING_H 1" >>confdefs.h
-
-fi
-ac_fn_c_check_header_compile "$LINENO" "unistd.h" "ac_cv_header_unistd_h" "$ac_includes_default"
-if test "x$ac_cv_header_unistd_h" = xyes
-then :
-  printf "%s\n" "#define HAVE_UNISTD_H 1" >>confdefs.h
-
-fi
-
-ac_fn_c_check_header_compile "$LINENO" "bsd/string.h" "ac_cv_header_bsd_string_h" "$ac_includes_default"
-if test "x$ac_cv_header_bsd_string_h" = xyes
-then :
-  printf "%s\n" "#define HAVE_BSD_STRING_H 1" >>confdefs.h
-
-fi
-
-
 # Checks for typedefs, structures, and compiler characteristics.
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
 printf %s "checking for an ANSI C-conforming const... " >&6; }
 if test ${ac_cv_c_const+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -4184,12 +3960,10 @@ _ACEOF
 if ac_fn_c_try_compile "$LINENO"
 then :
   ac_cv_c_const=yes
-else case e in #(
-  e) ac_cv_c_const=no ;;
-esac
+else $as_nop
+  ac_cv_c_const=no
 fi
-rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;;
-esac
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
 printf "%s\n" "$ac_cv_c_const" >&6; }
@@ -4204,8 +3978,8 @@ printf %s "checking for inline... " >&6; }
 if test ${ac_cv_c_inline+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) ac_cv_c_inline=no
+else $as_nop
+  ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
@@ -4223,8 +3997,7 @@ fi
 rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
   test "$ac_cv_c_inline" != no && break
 done
- ;;
-esac
+
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
 printf "%s\n" "$ac_cv_c_inline" >&6; }
@@ -4251,19 +4024,19 @@ printf %s "checking for GNU libc compatible malloc... 
 if test ${ac_cv_func_malloc_0_nonnull+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test "$cross_compiling" = yes
+else $as_nop
+  if test "$cross_compiling" = yes
 then :
   case "$host_os" in # ((
 		  # Guess yes on platforms where we know the result.
 		  *-gnu* | freebsd* | netbsd* | openbsd* | bitrig* \
-		  | hpux* | solaris* | cygwin* | mingw* | windows* | msys* )
+		  | hpux* | solaris* | cygwin* | mingw* | msys* )
 		    ac_cv_func_malloc_0_nonnull=yes ;;
 		  # If we don't know, assume the worst.
 		  *) ac_cv_func_malloc_0_nonnull=no ;;
 		esac
-else case e in #(
-  e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 
@@ -4281,16 +4054,13 @@ _ACEOF
 if ac_fn_c_try_run "$LINENO"
 then :
   ac_cv_func_malloc_0_nonnull=yes
-else case e in #(
-  e) ac_cv_func_malloc_0_nonnull=no ;;
-esac
+else $as_nop
+  ac_cv_func_malloc_0_nonnull=no
 fi
 rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext ;;
-esac
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
- ;;
-esac
+
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5
 printf "%s\n" "$ac_cv_func_malloc_0_nonnull" >&6; }
@@ -4299,8 +4069,8 @@ then :
 
 printf "%s\n" "#define HAVE_MALLOC 1" >>confdefs.h
 
-else case e in #(
-  e) printf "%s\n" "#define HAVE_MALLOC 0" >>confdefs.h
+else $as_nop
+  printf "%s\n" "#define HAVE_MALLOC 0" >>confdefs.h
 
    case " $LIBOBJS " in
   *" malloc.$ac_objext "* ) ;;
@@ -4310,8 +4080,7 @@ esac
 
 
 printf "%s\n" "#define malloc rpl_malloc" >>confdefs.h
- ;;
-esac
+
 fi
 
 
@@ -4320,19 +4089,19 @@ printf %s "checking for GNU libc compatible realloc...
 if test ${ac_cv_func_realloc_0_nonnull+y}
 then :
   printf %s "(cached) " >&6
-else case e in #(
-  e) if test "$cross_compiling" = yes
+else $as_nop
+  if test "$cross_compiling" = yes
 then :
   case "$host_os" in # ((
 		  # Guess yes on platforms where we know the result.
 		  *-gnu* | freebsd* | netbsd* | openbsd* | bitrig* \
-		  | hpux* | solaris* | cygwin* | mingw* | windows* | msys* )
+		  | hpux* | solaris* | cygwin* | mingw* | msys* )
 		    ac_cv_func_realloc_0_nonnull=yes ;;
 		  # If we don't know, assume the worst.
 		  *) ac_cv_func_realloc_0_nonnull=no ;;
 		esac
-else case e in #(
-  e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+else $as_nop
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 
@@ -4350,16 +4119,13 @@ _ACEOF
 if ac_fn_c_try_run "$LINENO"
 then :
   ac_cv_func_realloc_0_nonnull=yes
-else case e in #(
-  e) ac_cv_func_realloc_0_nonnull=no ;;
-esac
+else $as_nop
+  ac_cv_func_realloc_0_nonnull=no
 fi
 rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext ;;
-esac
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
- ;;
-esac
+
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_realloc_0_nonnull" >&5
 printf "%s\n" "$ac_cv_func_realloc_0_nonnull" >&6; }
@@ -4368,8 +4134,8 @@ then :
 
 printf "%s\n" "#define HAVE_REALLOC 1" >>confdefs.h
 
-else case e in #(
-  e) printf "%s\n" "#define HAVE_REALLOC 0" >>confdefs.h
+else $as_nop
+  printf "%s\n" "#define HAVE_REALLOC 0" >>confdefs.h
 
    case " $LIBOBJS " in
   *" realloc.$ac_objext "* ) ;;
@@ -4379,11 +4145,16 @@ esac
 
 
 printf "%s\n" "#define realloc rpl_realloc" >>confdefs.h
- ;;
-esac
+
 fi
 
 
+ac_fn_c_check_func "$LINENO" "bzero" "ac_cv_func_bzero"
+if test "x$ac_cv_func_bzero" = xyes
+then :
+  printf "%s\n" "#define HAVE_BZERO 1" >>confdefs.h
+
+fi
 ac_fn_c_check_func "$LINENO" "memmove" "ac_cv_func_memmove"
 if test "x$ac_cv_func_memmove" = xyes
 then :
@@ -4430,37 +4201,13 @@ printf "%s\n" "#define NDEBUG /**/" >>confdefs.h
 
 				;;
 		esac
-else case e in #(
-  e)
-printf "%s\n" "#define NDEBUG /**/" >>confdefs.h
- ;;
-esac
 fi
 
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $DEBUG" >&5
 printf "%s\n" "$DEBUG" >&6; }
 
-DEBIAN_ARCH=$target_cpu
-if  test "x$target_cpu" = "xarm6l" -o "x$target_cpu" = "xarm7l"
-then :
-  DEBIAN_ARCH="armhf"
-fi
-if  test "x$target_cpu" = "xaarch64"
-then :
-  DEBIAN_ARCH="arm64"
-fi
-if  test "x$target_cpu" = "xi686"
-then :
-  DEBIAN_ARCH="i386"
-fi
-if  test "x$target_cpu" = "xx86_64"
-then :
-  DEBIAN_ARCH="amd64"
-fi
+ac_config_files="$ac_config_files Makefile inc/Makefile lib/Makefile debian/Makefile src/Makefile"
 
-
-ac_config_files="$ac_config_files Makefile inc/Makefile lib/Makefile debian/Makefile debian/control src/Makefile"
-
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -4471,8 +4218,8 @@ cat >confcache <<\_ACEOF
 # config.status only pays attention to the cache file if you give it
 # the --recheck option to rerun configure.
 #
-# 'ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* 'ac_cv_foo' will be assigned the
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
 # following values.
 
 _ACEOF
@@ -4502,14 +4249,14 @@ printf "%s\n" "$as_me: WARNING: cache variable $ac_var
   (set) 2>&1 |
     case $as_nl`(ac_space=' '; set) 2>&1` in #(
     *${as_nl}ac_space=\ *)
-      # 'set' does not quote correctly, so add quotes: double-quote
+      # `set' does not quote correctly, so add quotes: double-quote
       # substitution turns \\\\ into \\, and sed turns \\ into \.
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
       ;; #(
     *)
-      # 'set' quotes correctly as required by POSIX, so do not add quotes.
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
       sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
     esac |
@@ -4599,6 +4346,7 @@ cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
 
 # Be more Bourne compatible
 DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
 if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
 then :
   emulate sh
@@ -4607,13 +4355,12 @@ then :
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
-else case e in #(
-  e) case `(set -o) 2>/dev/null` in #(
+else $as_nop
+  case `(set -o) 2>/dev/null` in #(
   *posix*) :
     set -o posix ;; #(
   *) :
      ;;
-esac ;;
 esac
 fi
 
@@ -4685,7 +4432,7 @@ IFS=$as_save_IFS
 
      ;;
 esac
-# We did not find ourselves, most probably we were run as 'sh COMMAND'
+# We did not find ourselves, most probably we were run as `sh COMMAND'
 # in which case we are not to be found in the path.
 if test "x$as_myself" = x; then
   as_myself=$0
@@ -4714,6 +4461,7 @@ as_fn_error ()
 } # as_fn_error
 
 
+
 # as_fn_set_status STATUS
 # -----------------------
 # Set $? to STATUS, without forking.
@@ -4753,12 +4501,11 @@ then :
   {
     eval $1+=\$2
   }'
-else case e in #(
-  e) as_fn_append ()
+else $as_nop
+  as_fn_append ()
   {
     eval $1=\$$1\$2
-  } ;;
-esac
+  }
 fi # as_fn_append
 
 # as_fn_arith ARG...
@@ -4772,12 +4519,11 @@ then :
   {
     as_val=$(( $* ))
   }'
-else case e in #(
-  e) as_fn_arith ()
+else $as_nop
+  as_fn_arith ()
   {
     as_val=`expr "$@" || test $? -eq 1`
-  } ;;
-esac
+  }
 fi # as_fn_arith
 
 
@@ -4860,9 +4606,9 @@ if (echo >conf$$.file) 2>/dev/null; then
   if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
     # ... but there are two gotchas:
-    # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable.
-    # In both cases, we have to default to 'cp -pR'.
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
       as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
@@ -4943,12 +4689,10 @@ as_test_x='test -x'
 as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
-as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 
 # Sed expression to map a string onto a valid variable name.
-as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-as_tr_sh="eval sed '$as_sed_sh'" # deprecated
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
 exec 6>&1
@@ -4964,7 +4708,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # values after options handling.
 ac_log="
 This file was extended by libaitcfg $as_me 9.5, which was
-generated by GNU Autoconf 2.72.  Invocation command line was
+generated by GNU Autoconf 2.71.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -4995,7 +4739,7 @@ _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
-'$as_me' instantiates files and other configuration actions
+\`$as_me' instantiates files and other configuration actions
 from templates according to the current configuration.  Unless the files
 and actions are specified as TAGs, all are instantiated by default.
 
@@ -5028,10 +4772,10 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config='$ac_cs_config_escaped'
 ac_cs_version="\\
 libaitcfg config.status 9.5
-configured by $0, generated by GNU Autoconf 2.72,
+configured by $0, generated by GNU Autoconf 2.71,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2023 Free Software Foundation, Inc.
+Copyright (C) 2021 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -5091,8 +4835,8 @@ do
     ac_need_defaults=false;;
   --he | --h)
     # Conflict between --help and --header
-    as_fn_error $? "ambiguous option: '$1'
-Try '$0 --help' for more information.";;
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
   --help | --hel | -h )
     printf "%s\n" "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
@@ -5100,8 +4844,8 @@ Try '$0 --help' for more information.";;
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) as_fn_error $? "unrecognized option: '$1'
-Try '$0 --help' for more information." ;;
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
 
   *) as_fn_append ac_config_targets " $1"
      ac_need_defaults=false ;;
@@ -5154,10 +4898,9 @@ do
     "inc/Makefile") CONFIG_FILES="$CONFIG_FILES inc/Makefile" ;;
     "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
     "debian/Makefile") CONFIG_FILES="$CONFIG_FILES debian/Makefile" ;;
-    "debian/control") CONFIG_FILES="$CONFIG_FILES debian/control" ;;
     "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
 
-  *) as_fn_error $? "invalid argument: '$ac_config_target'" "$LINENO" 5;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
@@ -5176,7 +4919,7 @@ fi
 # creating and moving files from /tmp can sometimes cause problems.
 # Hook for its removal unless debugging.
 # Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to '$tmp'.
+# after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
   tmp= ac_tmp=
@@ -5200,7 +4943,7 @@ ac_tmp=$tmp
 
 # Set up the scripts for CONFIG_FILES section.
 # No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with './config.status config.h'.
+# This happens for instance with `./config.status config.h'.
 if test -n "$CONFIG_FILES"; then
 
 
@@ -5358,13 +5101,13 @@ fi # test -n "$CONFIG_FILES"
 
 # Set up the scripts for CONFIG_HEADERS section.
 # No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with './config.status Makefile'.
+# This happens for instance with `./config.status Makefile'.
 if test -n "$CONFIG_HEADERS"; then
 cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
 BEGIN {
 _ACEOF
 
-# Transform confdefs.h into an awk script 'defines.awk', embedded as
+# Transform confdefs.h into an awk script `defines.awk', embedded as
 # here-document in config.status, that substitutes the proper values into
 # config.h.in to produce config.h.
 
@@ -5474,7 +5217,7 @@ do
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag '$ac_tag'" "$LINENO" 5;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -5496,19 +5239,19 @@ do
       -) ac_f="$ac_tmp/stdin";;
       *) # Look for the file first in the build tree, then in the source tree
 	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-	 # because $ac_f cannot contain ':'.
+	 # because $ac_f cannot contain `:'.
 	 test -f "$ac_f" ||
 	   case $ac_f in
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error 1 "cannot find input file: '$ac_f'" "$LINENO" 5;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
       esac
       case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
     done
 
-    # Let's still pretend it is 'configure' which instantiates (i.e., don't
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
     # use $as_me), people would be surprised to read:
     #    /* config.h.  Generated by config.status.  */
     configure_input='Generated from '`
@@ -5636,7 +5379,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 esac
 _ACEOF
 
-# Neutralize VPATH when '$srcdir' = '.'.
+# Neutralize VPATH when `$srcdir' = `.'.
 # Shell code in configure.ac might set extrasub.
 # FIXME: do we really want to maintain this feature?
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
@@ -5666,9 +5409,9 @@ test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
       "$ac_tmp/out"`; test -z "$ac_out"; } &&
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable 'datarootdir'
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined" >&5
-printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable 'datarootdir'
+printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined" >&2;}
 
   rm -f "$ac_tmp/stdin"