Annotation of libaitcrc/example/test.txt, revision 1.2
1.2 ! misho 1: # @(#)printcap 5.3 (Berkeley) 6/30/90
! 2: # $FreeBSD: src/etc/printcap,v 1.14 2004/06/06 11:46:27 schweikh Exp $
! 3:
! 4: #
! 5: # This enables a simple local "raw" printer, hooked up to the first
! 6: # parallel port. No kind of filtering is done, so everything you pass
! 7: # to the "lpr" command will be printed unmodified.
! 8: #
! 9: # Remember, for further print queues you're going to add, you have
! 10: # to choose different spool directories (the "sd" capability below),
! 11: # otherwise you will greatly confuse lpd.
! 12: #
! 13: # For some advanced printing, have a look at the "apsfilter" package.
! 14: # It plugs into the lpd system, allowing you to print a variety of
! 15: # different file types by converting everything to PostScript(tm)
! 16: # format. For more information about apsfilter visit
! 17: #
! 18: # http://www.apsfilter.org/
! 19: #
! 20: # If you don't have a PostScript(tm) printer, don't panic, but do
! 21: # also install the latest "ghostscript" package for best printer support.
! 22: #
! 23: # Do also refer to the "printing" section of the handbook.
! 24: #
! 25: # http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/printing.html
! 26: #
! 27: # A local copy can be found under
! 28: #
! 29: # /usr/share/doc/handbook/handbook.{html,latin1}.
! 30: #
! 31: # Banner pages are now suppressed by default. Remove the :sh: capability
! 32: # to turn them back on.
! 33: #
! 34: #lp|local line printer:\
! 35: # :sh:\
! 36: # :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
! 37: #
! 38: # Sample remote printer. The physical printer is on machine "lphost".
! 39: # You can perform any kind of local filtering directly. If you need
! 40: # local filters (e.g. LF -> CR-LF conversion for HP printers), create
! 41: # a filter script that sends the proper escape sequence to the printer
! 42: # and then concatenates stdin to stdout.
! 43: #
! 44: #remote|sample remote printer:\
! 45: # :sh:\
! 46: # :rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:\
! 47: # :if=/usr/local/libexec/if-script:
! 48: #
! 49: # Simple Russian printer with hardware CP866 character set, output filter
! 50: # used for KOI8-R -> CP866 conversion
! 51: #
! 52: #lp|Russian local line printer:\
! 53: # :sh:of=/usr/libexec/lpr/ru/koi2alt:\
! 54: # :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
! 55: # APS1_BEGIN:printer1
! 56: # - don't delete start label for apsfilter printer1
! 57: # - no other printer defines between BEGIN and END LABEL
! 58: lp|hl1250;r=600x600;q=medium;c=full;p=a4;m=auto:\
! 59: :lp=/dev/ulpt0:\
! 60: :if=/usr/local/etc/apsfilter/basedir/bin/apsfilter:\
! 61: :sd=/var/spool/lpd/lp:\
! 62: :lf=/var/spool/lpd/lp/log:\
! 63: :af=/var/spool/lpd/lp/acct:\
! 64: :mx#0:\
! 65: :sh:
! 66: # APS1_END - don't delete this
! 67: # APS2_BEGIN:printer2
! 68: # - don't delete start label for apsfilter printer2
! 69: # - no other printer defines between BEGIN and END LABEL
! 70: 1320n|PS;r=600x600;q=medium;c=full;p=a4;m=auto:\
! 71: :lp=:\
! 72: :rm=10.3.127.180:\
! 73: :rp=raw:\
! 74: :if=/usr/local/etc/apsfilter/basedir/bin/apsfilter:\
! 75: :sd=/var/spool/lpd/1320n:\
! 76: :lf=/var/spool/lpd/1320n/log:\
! 77: :af=/var/spool/lpd/1320n/acct:\
! 78: :mx#0:\
! 79: :sh:
! 80: # APS2_END - don't delete this
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>