Annotation of libaitmqtt/inc/aitmqtt.h, revision 1.1
1.1 ! misho 1: /*************************************************************************
! 2: * (C) 2011 AITNET ltd - Sofia/Bulgaria - <misho@aitbg.com>
! 3: * by Michael Pounov <misho@openbsd-bg.org>
! 4: *
! 5: * $Author: misho $
! 6: * $Id: aitsched.c,v 1.5 2012/01/24 21:59:47 misho Exp $
! 7: *
! 8: **************************************************************************
! 9: The ELWIX and AITNET software is distributed under the following
! 10: terms:
! 11:
! 12: All of the documentation and software included in the ELWIX and AITNET
! 13: Releases is copyrighted by ELWIX - Sofia/Bulgaria <info@elwix.org>
! 14:
! 15: Copyright 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
! 16: by Michael Pounov <misho@elwix.org>. All rights reserved.
! 17:
! 18: Redistribution and use in source and binary forms, with or without
! 19: modification, are permitted provided that the following conditions
! 20: are met:
! 21: 1. Redistributions of source code must retain the above copyright
! 22: notice, this list of conditions and the following disclaimer.
! 23: 2. Redistributions in binary form must reproduce the above copyright
! 24: notice, this list of conditions and the following disclaimer in the
! 25: documentation and/or other materials provided with the distribution.
! 26: 3. All advertising materials mentioning features or use of this software
! 27: must display the following acknowledgement:
! 28: This product includes software developed by Michael Pounov <misho@elwix.org>
! 29: ELWIX - Embedded LightWeight unIX and its contributors.
! 30: 4. Neither the name of AITNET nor the names of its contributors
! 31: may be used to endorse or promote products derived from this software
! 32: without specific prior written permission.
! 33:
! 34: THIS SOFTWARE IS PROVIDED BY AITNET AND CONTRIBUTORS ``AS IS'' AND
! 35: ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 36: IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 37: ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
! 38: FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
! 39: DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
! 40: OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
! 41: HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
! 42: LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
! 43: OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
! 44: SUCH DAMAGE.
! 45: */
! 46: #ifndef __AITMQTT_H
! 47: #define __AITMQTT_H
! 48:
! 49:
! 50: /* FIXED HEADER */
! 51:
! 52: struct mqtthdr {
! 53: union {
! 54: struct {
! 55: unsigned char retain:1,
! 56: qos:2,
! 57: dup:1,
! 58: type:4;
! 59: };
! 60: unsigned char val;
! 61: } mqtt_msg;
! 62: unsigned char mqtt_len[1]; /* may be grow to 4 bytes */
! 63: } __packed;
! 64: #define MQTTHDR_MSGINIT(x) (assert((x)), (x)->mqtt_msg.val ^= (x)->mqtt_msg.val)
! 65:
! 66: #define MQTT_TYPE_UNKNOWN 0 /* reserved */
! 67: #define MQTT_TYPE_CONNECT 1 /* client request to connect to server */
! 68: #define MQTT_TYPE_CONNACK 2 /* connect acknowledgment */
! 69: #define MQTT_TYPE_PUBLISH 3 /* publish message */
! 70: #define MQTT_TYPE_PUBACK 4 /* publish acknowledgment */
! 71: #define MQTT_TYPE_PUBREC 5 /* publish received (assured delivery part 1) */
! 72: #define MQTT_TYPE_PUBREL 6 /* publish release (assured delivery part 2) */
! 73: #define MQTT_TYPE_PUBCOMP 7 /* publish complete (assured delivery part 3) */
! 74: #define MQTT_TYPE_SUBSCRIBE 8 /* client subscribe request */
! 75: #define MQTT_TYPE_SUBACK 9 /* subscribe acknowledgment */
! 76: #define MQTT_TYPE_UNSUBSCRIBE 10 /* client unsubscribe request */
! 77: #define MQTT_TYPE_UNSUBACK 11 /* unsubscribe acknowledgment */
! 78: #define MQTT_TYPE_PINGREQ 12 /* PING request */
! 79: #define MQTT_TYPE_PINGRESP 13 /* PING response */
! 80: #define MQTT_TYPE_DISCONNECT 14 /* client is disconnecting */
! 81: #define MQTT_TYPE_MAX 15 /* reserved */
! 82:
! 83: #define MQTT_FLAG_DUP 1 /* This flag is set when the client or server attempts to re-deliver
! 84: a PUBLISH, PUBREL, SUBSCRIBE or UNSUBSCRIBE message.
! 85: This applies to messages where the value of QoS is greater than
! 86: zero (0), and an acknowledgment is required.
! 87: When the DUP bit is set, the variable header includes a Message ID.
! 88:
! 89: The recipient should treat this flag as a hint as to whether
! 90: the message may have been previously received.
! 91: It should not be relied on to detect duplicates. */
! 92:
! 93: #define MQTT_QOS_ONCE 0 /* At most once, Fire and Forget, <=1 */
! 94: #define MQTT_QOS_ACK 1 /* At least once, Acknowledged delivery, >=1 */
! 95: #define MQTT_QOS_EXACTLY 2 /* Exactly once, Assured delivery, =1 */
! 96: #define MQTT_QOS_RESERVED 3 /* reserved */
! 97:
! 98: #define MQTT_FLAG_RETAIN 1 /* This flag is only used on PUBLISH messages.
! 99:
! 100: When a client sends a PUBLISH to a server,
! 101: if the Retain flag is set (1),
! 102: the server should hold on to the message after it has been
! 103: delivered to the current subscribers.
! 104: When a new subscription is established on a topic,
! 105: the last retained message on that topic should be sent to
! 106: the subscriber with the Retain flag set.
! 107: If there is no retained message, nothing is sent
! 108: This is useful where publishers send messages on a
! 109: "report by exception" basis, where it might be some time between messages.
! 110: This allows new subscribers to instantly receive data with the retained,
! 111: or Last Known Good, value.
! 112:
! 113: When a server sends a PUBLISH to a client as a result of
! 114: a subscription that already existed when the original PUBLISH arrived,
! 115: the Retain flag should not be set, regardless of the Retain flag
! 116: of the original PUBLISH. This allows a client to distinguish messages
! 117: that are being received because they were retained and those
! 118: that are being received "live".
! 119:
! 120: Retained messages should be kept over restarts of the server.
! 121: A server may delete a retained message if it receives a message
! 122: with a zero-length payload and the Retain flag set on the same topic. */
! 123:
! 124: /* VARIABLE HEADERS */
! 125:
! 126: #define MQTT_RETCODE_ACCEPTED 0
! 127: #define MQTT_RETCODE_REFUSE_VER 1
! 128: #define MQTT_RETCODE_REFUSE_ID 2
! 129: #define MQTT_RETCODE_REFUSE_UNAVAIL 3
! 130: #define MQTT_RETCODE_REFUSE_USERPASS 4
! 131: #define MQTT_RETCODE_DENIED 5
! 132:
! 133:
! 134: /* MQTT Message buffer */
! 135:
! 136: typedef struct {
! 137: void *msg_base;
! 138: unsigned short msg_len;
! 139: } mqtt_msg_t;
! 140:
! 141: /* MQTT hooks callback */
! 142:
! 143: typedef void *(*mqtt_cb_t)(void *);
! 144:
! 145: /* MQTT structures */
! 146:
! 147: typedef union {
! 148: struct {
! 149: unsigned short m:8,
! 150: l:8;
! 151: } sb;
! 152: unsigned short val;
! 153: } mqtt_len_t;
! 154:
! 155: typedef struct {
! 156: unsigned char sub_ret;
! 157: mqtt_msg_t sub_topic;
! 158: mqtt_msg_t sub_value;
! 159: } mqtt_subscr_t;
! 160:
! 161: typedef struct {
! 162: mqtt_len_t var_sb;
! 163: unsigned char var_data[0];
! 164: } __packed mqtthdr_var_t;
! 165: #define MQTTHDR_VAR_SIZEOF(x) (assert((x)), sizeof(mqtt_len_t) + ntohs((x)->var_sb.val))
! 166:
! 167: typedef unsigned char mqtthdr_protover_t;
! 168:
! 169: typedef union {
! 170: struct {
! 171: unsigned char reserved:1,
! 172: clean_sess:1,
! 173: will_flg:1,
! 174: will_qos:2,
! 175: will_retain:1,
! 176: password:1,
! 177: username:1;
! 178: };
! 179: unsigned char flags;
! 180: } __packed mqtthdr_connflgs_t;
! 181:
! 182: typedef struct {
! 183: unsigned char reserved;
! 184: unsigned char retcode;
! 185: } __packed mqtthdr_connack_t;
! 186:
! 187:
! 188: // -------------------------------------------------------
! 189: // mqtt_GetErrno() Get error code of last operation
! 190: inline int mqtt_GetErrno();
! 191: // mqtt_GetError() Get error text of last operation
! 192: inline const char *mqtt_GetError();
! 193: // -------------------------------------------------------
! 194:
! 195:
! 196: /*
! 197: * mqtt_msgAlloc() Allocate memory for MQTT Message
! 198: *
! 199: * @len = >0 Allocate buffer with length
! 200: * return: NULL error or Message, after use must call mqtt_msgFree() with all!=0
! 201: */
! 202: inline mqtt_msg_t *mqtt_msgAlloc(unsigned short len);
! 203: /*
! 204: * mqtt_msgFree() Free MQTT message
! 205: *
! 206: * @msg = Message buffer
! 207: * @all = !=0 Destroy entire message, if MQTT Message allocated with mqtt_msgAlloc()
! 208: * return: none
! 209: */
! 210: inline void mqtt_msgFree(mqtt_msg_t ** __restrict msg, int all);
! 211: /*
! 212: * mqtt_msgRealloc() Reallocate MQTT message buffer
! 213: *
! 214: * @msg = MQTT message
! 215: * @len = new length
! 216: * return: -1 error or >-1 old buffer length
! 217: */
! 218: inline int mqtt_msgRealloc(mqtt_msg_t * __restrict msg, unsigned short len);
! 219:
! 220: /*
! 221: * mqtt_encodeLen() Encode number to MQTT length field
! 222: *
! 223: * @num = number for encode
! 224: * return: -1 error or >-1 length
! 225: */
! 226: inline unsigned int mqtt_encodeLen(unsigned int num);
! 227: /*
! 228: * mqtt_decodeLen() Decode length from MQTT packet
! 229: *
! 230: * @len = length from MQTT header
! 231: * @n = sizeof bytes, if !=NULL
! 232: * return: -1 error, >-1 length of message
! 233: */
! 234: inline unsigned int mqtt_decodeLen(void * __restrict len, int * __restrict n);
! 235: /*
! 236: * mqtt_sizeLen Return sizeof len field
! 237: *
! 238: * @len = length
! 239: * return: -1 error, >-1 sizeof len in bytes
! 240: */
! 241: inline char mqtt_sizeLen(unsigned int len);
! 242: /*
! 243: * mqtt_str2sub Create MQTT subscribe variable from string(s)
! 244: *
! 245: * @csStr = strings
! 246: * @strnum = number of strings elements
! 247: * @qoses = QoS elements applied to subscribe variable,
! 248: * count of elements must be equal with csStr elements
! 249: * return: NULL error or != subscribe variables array, must be free after use with mqtt_freeSub()
! 250: */
! 251: inline mqtt_subscr_t *mqtt_str2sub(const char **csStr, unsigned short strnum, unsigned char *qoses);
! 252: /*
! 253: * mqtt_subFree() Free array from subscribe variables
! 254: *
! 255: * @subs = Subscribe variables
! 256: * return: none
! 257: */
! 258: inline void mqtt_subFree(mqtt_subscr_t ** __restrict subs);
! 259: /*
! 260: * mqtt_subAlloc() Create array from subscribe variables
! 261: *
! 262: * @num = Number of elements
! 263: * return: NULL error or subscribe array, after use must call mqtt_subFree()
! 264: */
! 265: inline mqtt_subscr_t *mqtt_subAlloc(unsigned short num);
! 266: /*
! 267: * mqtt_subRealloc() Reallocate array from subscribe variables
! 268: *
! 269: * @subs = Subscribe array
! 270: * @num = Number of elements
! 271: * return: NULL error or subscribe array, after use must call mqtt_subFree()
! 272: */
! 273: inline mqtt_subscr_t *mqtt_subRealloc(mqtt_subscr_t * __restrict subs, unsigned short num);
! 274:
! 275:
! 276: /*** SENDER FUNCTIONS ***/
! 277:
! 278: /*
! 279: * mqtt_msgCONNECT() Create CONNECT message
! 280: *
! 281: * @buf = Message buffer
! 282: * @csConnID = ConnectID
! 283: * @kasec = Keep alive timeout
! 284: * @csUser = Username if !=NULL
! 285: * @csPass = Password for Username, only if csUser is set
! 286: * @csWillTopic = Will Topic if !=NULL Will Flags set into message
! 287: * @csWillMessage = Will Message, may be NULL
! 288: * @ClrSess = Clear Session subscriptions after disconnect
! 289: * @WillQOS = Will QOS if csWillTopic is set
! 290: * @WillRetain = Will Retain Will Message if csWillTopic is set
! 291: * return: -1 error or >-1 message size for send
! 292: */
! 293: int mqtt_msgCONNECT(mqtt_msg_t * __restrict buf, const char *csConnID,
! 294: unsigned short kasec, const char *csUser, const char *csPass,
! 295: const char *csWillTopic, const char *csWillMessage,
! 296: unsigned char ClrSess, unsigned char WillQOS, unsigned char WillRetain);
! 297: /*
! 298: * mqtt_msgCONNACK() Create CONNACK message
! 299: *
! 300: * @buf = Message buffer
! 301: * @retcode = Return code
! 302: * return: -1 error or >-1 message size for send
! 303: */
! 304: int mqtt_msgCONNACK(mqtt_msg_t * __restrict buf, unsigned char retcode);
! 305: /*
! 306: * mqtt_msgDISCONNECT() Create DISCONNECT message
! 307: *
! 308: * @buf = Message buffer
! 309: * return: -1 error or >-1 message size for send
! 310: */
! 311: int mqtt_msgDISCONNECT(mqtt_msg_t * __restrict buf);
! 312: /*
! 313: * mqtt_msgPINGREQ() Create PINGREQ message
! 314: *
! 315: * @buf = Message buffer
! 316: * return: -1 error or >-1 message size for send
! 317: */
! 318: int mqtt_msgPINGREQ(mqtt_msg_t * __restrict buf);
! 319: /*
! 320: * mqtt_msgPINGRESP() Create PINGRESP message
! 321: *
! 322: * @buf = Message buffer
! 323: * return: -1 error or >-1 message size for send
! 324: */
! 325: int mqtt_msgPINGRESP(mqtt_msg_t * __restrict buf);
! 326:
! 327: /*
! 328: * mqtt_msgPUBLISH() Create PUBLISH message
! 329: *
! 330: * @buf = Message buffer
! 331: * @csTopic = Publish topic
! 332: * @msgID = MessageID >0, if QOS != MQTT_QOS_ONCE
! 333: * @Dup = Duplicate message
! 334: * @QOS = QoS
! 335: * @Retain = Retain message
! 336: * @pData = Publish data into topic
! 337: * @datlen = Publish data length
! 338: * return: -1 error or >-1 message size for send
! 339: */
! 340: int mqtt_msgPUBLISH(mqtt_msg_t * __restrict buf, const char *csTopic,
! 341: unsigned short msgID, unsigned char Dup, unsigned char QOS,
! 342: unsigned char Retain, const void *pData, int datlen);
! 343: /*
! 344: * mqtt_msgPUBACK() Create PUBACK message
! 345: *
! 346: * @buf = Message buffer
! 347: * @msgID = MessageID
! 348: * return: -1 error or >-1 message size for send
! 349: */
! 350: inline int mqtt_msgPUBACK(mqtt_msg_t * __restrict buf, unsigned short msgID);
! 351: /*
! 352: * mqtt_msgPUBREC() Create PUBREC message
! 353: *
! 354: * @buf = Message buffer
! 355: * @msgID = MessageID
! 356: * return: -1 error or >-1 message size for send
! 357: */
! 358: inline int mqtt_msgPUBREC(mqtt_msg_t * __restrict buf, unsigned short msgID);
! 359: /*
! 360: * mqtt_msgPUBREL() Create PUBREL message
! 361: *
! 362: * @buf = Message buffer
! 363: * @msgID = MessageID
! 364: * return: -1 error or >-1 message size for send
! 365: */
! 366: inline int mqtt_msgPUBREL(mqtt_msg_t * __restrict buf, unsigned short msgID);
! 367: /*
! 368: * mqtt_msgPUBCOMP() Create PUBCOMP message
! 369: *
! 370: * @buf = Message buffer
! 371: * @msgID = MessageID
! 372: * return: -1 error or >-1 message size for send
! 373: */
! 374: inline int mqtt_msgPUBCOMP(mqtt_msg_t * __restrict buf, unsigned short msgID);
! 375:
! 376: /*
! 377: * mqtt_msgSUBSCRIBE() Create SUBSCRIBE message
! 378: *
! 379: * @buf = Message buffer
! 380: * @Topics = MQTT subscription topics
! 381: * @msgID = MessageID
! 382: * @Dup = Duplicate message
! 383: * @QOS = QoS
! 384: * return: -1 error or >-1 message size for send
! 385: */
! 386: int
! 387: mqtt_msgSUBSCRIBE(mqtt_msg_t * __restrict buf, mqtt_subscr_t * __restrict Topics,
! 388: unsigned short msgID, unsigned char Dup, unsigned char QOS);
! 389: /*
! 390: * mqtt_msgSUBACK() Create SUBACK message
! 391: *
! 392: * @buf = Message buffer
! 393: * @Topics = MQTT subscription topics
! 394: * @msgID = MessageID
! 395: * return: -1 error or >-1 message size for send
! 396: */
! 397: int mqtt_msgSUBACK(mqtt_msg_t * __restrict buf, mqtt_subscr_t * __restrict Topics,
! 398: unsigned short msgID);
! 399: /*
! 400: * mqtt_msgUNSUBSCRIBE() Create UNSUBSCRIBE message
! 401: *
! 402: * @buf = Message buffer
! 403: * @Topics = MQTT subscription topics
! 404: * @msgID = MessageID
! 405: * @Dup = Duplicate message
! 406: * @QOS = QoS
! 407: * return: -1 error or >-1 message size for send
! 408: */
! 409: int
! 410: mqtt_msgUNSUBSCRIBE(mqtt_msg_t * __restrict buf, mqtt_subscr_t * __restrict Topics,
! 411: unsigned short msgID, unsigned char Dup, unsigned char QOS);
! 412: /*
! 413: * mqtt_msgUNSUBACK() Create UNSUBACK message
! 414: *
! 415: * @buf = Message buffer
! 416: * @msgID = MessageID
! 417: * return: -1 error or >-1 message size for send
! 418: */
! 419: int mqtt_msgUNSUBACK(mqtt_msg_t * __restrict buf, unsigned short msgID);
! 420:
! 421:
! 422: /*** RECEIVER FUNCTIONS ***/
! 423:
! 424: /*
! 425: * mqtt_readCONNECT() Read elements from CONNECT message
! 426: *
! 427: * @buf = Message buffer
! 428: * @kasec = Keep Alive in seconds for current connection
! 429: * @psConnID = ConnectID
! 430: * @connLen = ConnectID length
! 431: * @psUser = Username if !=NULL
! 432: * @userLen = Username length
! 433: * @psPass = Password for Username, only if csUser is set
! 434: * @passLen = Password length
! 435: * @psWillTopic = Will Topic if !=NULL Will Flags set into message and must be free()
! 436: * @psWillMessage = Will Message, may be NULL if !NULL must be free() after use!
! 437: * return: .reserved == 1 is error or == 0 connection flags & msg ok
! 438: */
! 439: mqtthdr_connack_t mqtt_readCONNECT(mqtt_msg_t * __restrict buf, unsigned short *kasec,
! 440: char * __restrict psConnID, int connLen,
! 441: char * __restrict psUser, int userLen, char * __restrict psPass, int passLen,
! 442: char ** __restrict psWillTopic, char ** __restrict psWillMessage);
! 443: /*
! 444: * mqtt_readCONNACK() Read CONNACK message
! 445: *
! 446: * @buf = Message buffer
! 447: * return: -1 error or >-1 CONNECT message return code
! 448: */
! 449: unsigned char mqtt_readCONNACK(mqtt_msg_t * __restrict buf);
! 450: /*
! 451: * mqtt_readDISCONNECT() Read DISCONNECT message
! 452: *
! 453: * @buf = Message buffer
! 454: * return: -1 error, 0 ok, >0 undefined result
! 455: */
! 456: int mqtt_readDISCONNECT(mqtt_msg_t * __restrict buf);
! 457: /*
! 458: * mqtt_readPINGREQ() Read PINGREQ message
! 459: *
! 460: * @buf = Message buffer
! 461: * return: -1 error, 0 ok, >0 undefined result
! 462: */
! 463: int mqtt_readPINGREQ(mqtt_msg_t * __restrict buf);
! 464: /*
! 465: * mqtt_readPINGRESP() Read PINGRESP message
! 466: *
! 467: * @buf = Message buffer
! 468: * return: -1 error, 0 ok, >0 undefined result
! 469: */
! 470: int mqtt_readPINGRESP(mqtt_msg_t * __restrict buf);
! 471:
! 472: /*
! 473: * mqtt_readPUBLISH() Read PUBLISH message
! 474: *
! 475: * @buf = Message buffer
! 476: * @psTopic = Topic
! 477: * @topicLen = Topic length
! 478: * @msgID = MessageID
! 479: * @pData = Data buffer
! 480: * @datLen = Data buffer length, if *datLen == 0 allocate memory for pData
! 481: * return: NULL error or !=NULL MQTT fixed header
! 482: */
! 483: struct mqtthdr *mqtt_readPUBLISH(mqtt_msg_t * __restrict buf, char * __restrict psTopic,
! 484: int topicLen, unsigned short *msgID, void * __restrict pData, int *datLen);
! 485: /*
! 486: * mqtt_readPUBACK() Read PUBACK message
! 487: *
! 488: * @buf = Message buffer
! 489: * return: -1 error or MessageID
! 490: */
! 491: u_short mqtt_readPUBACK(mqtt_msg_t * __restrict buf);
! 492: /*
! 493: * mqtt_readPUBREC() Read PUBREC message
! 494: *
! 495: * @buf = Message buffer
! 496: * return: -1 error or MessageID
! 497: */
! 498: u_short mqtt_readPUBREC(mqtt_msg_t * __restrict buf);
! 499: /*
! 500: * mqtt_readPUBREL() Read PUBREL message
! 501: *
! 502: * @buf = Message buffer
! 503: * return: -1 error or MessageID
! 504: */
! 505: u_short mqtt_readPUBREL(mqtt_msg_t * __restrict buf);
! 506: /*
! 507: * mqtt_readPUBCOMP() Read PUBCOMP message
! 508: *
! 509: * @buf = Message buffer
! 510: * return: -1 error or MessageID
! 511: */
! 512: u_short mqtt_readPUBCOMP(mqtt_msg_t * __restrict buf);
! 513:
! 514: /*
! 515: * mqtt_readSUBSCRIBE() Read SUBSCRIBE message
! 516: *
! 517: * @buf = Message buffer
! 518: * @msgID = MessageID
! 519: * @subscr = Subscriptions, must be free after use with mqtt_subFree()
! 520: * return: NULL error or !=NULL MQTT fixed header
! 521: */
! 522: struct mqtthdr *mqtt_readSUBSCRIBE(mqtt_msg_t * __restrict buf, unsigned short *msgID,
! 523: mqtt_subscr_t **subscr);
! 524: /*
! 525: * mqtt_readSUBACK() Read SUBACK message
! 526: *
! 527: * @buf = Message buffer
! 528: * @msgID = MessageID
! 529: * @subqos = Subscribes QoS, must be free after use with free()
! 530: * return: -1 error or >-1 readed subscribes QoS elements
! 531: */
! 532: int mqtt_readSUBACK(mqtt_msg_t * __restrict buf, u_short *msgID, unsigned char **subqos);
! 533: /*
! 534: * mqtt_readUNSUBSCRIBE() Read UNSUBSCRIBE message
! 535: *
! 536: * @buf = Message buffer
! 537: * @msgID = MessageID
! 538: * @subscr = Subscriptions, must be free after use with mqtt_subFree()
! 539: * return: NULL error or !=NULL MQTT fixed header
! 540: */
! 541: struct mqtthdr *mqtt_readUNSUBSCRIBE(mqtt_msg_t * __restrict buf, unsigned short *msgID,
! 542: mqtt_subscr_t **subscr);
! 543: /*
! 544: * mqtt_readUNSUBACK() Read UNSUBACK message
! 545: *
! 546: * @buf = Message buffer
! 547: * return: -1 error or MessageID
! 548: */
! 549: u_short mqtt_readUNSUBACK(mqtt_msg_t * __restrict buf);
! 550:
! 551: /*** ENGINE FUNCTIONS ***/
! 552:
! 553: /*
! 554: * mqttInitCallbacks() Init callback array for dispatcher
! 555: *
! 556: * return: NULL error or !=NULL allocated callback array, after use free with mqttFiniCallbacks()
! 557: */
! 558: mqtt_cb_t *mqttInitCallbacks(void);
! 559: /*
! 560: * mqttFiniCallbacks() Free callback array
! 561: *
! 562: * @cb = Callback array
! 563: * return: none
! 564: */
! 565: void mqttFiniCallbacks(mqtt_cb_t ** __restrict cb);
! 566: /*
! 567: * MQTT_CALLBACK() Assign function to callback array for MQTT dispatcher
! 568: *
! 569: * @_cbs = Callback array
! 570: * @_x = MQTT Message type, like MQTT_TYPE_* ...
! 571: * @_func = Function
! 572: * return: none
! 573: */
! 574: #define MQTT_CALLBACK(_cbs, _x, _func) (assert((_cbs)), (_cbs)[(_x)] = (_func))
! 575: /*
! 576: * mqttDispatcher() MQTT Message type dispatcher
! 577: *
! 578: * @cb = Callback array
! 579: * @buf = Received MQTT message
! 580: * return: -1 error or >-1 return value from executed callback
! 581: */
! 582: inline int mqttDispatcher(mqtt_cb_t * __restrict cb, mqtt_msg_t * __restrict buf);
! 583:
! 584:
! 585: #endif
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>