Annotation of mqtt/inc/aitmqtt.h, revision 1.1.1.1.2.4
1.1 misho 1: #ifndef __AITMQTT_H
2: #define __AITMQTT_H
3:
4:
1.1.1.1.2.3 misho 5: #define MQTT_DATA_MAX 268435455
1.1.1.1.2.4! misho 6: #define MQTT_CONN_STR "MQIsdp"
! 7: #define MQTT_PROTO_VER 3
! 8: #define MQTT_KEEPALIVE 10
! 9:
! 10: /* FIXED HEADER */
1.1.1.1.2.3 misho 11:
1.1.1.1.2.1 misho 12: struct mqtthdr {
1.1.1.1.2.4! misho 13: struct {
! 14: unsigned char retain:1,
! 15: qos:2,
! 16: dup:1,
! 17: type:4;
! 18: } mqtt_msg;
! 19: unsigned char mqtt_len[1]; /* may be grow to 4 bytes */
! 20: } __packed;
1.1.1.1.2.1 misho 21:
22: #define MQTT_TYPE_UNKNOWN 0 /* reserved */
23: #define MQTT_TYPE_CONNECT 1 /* client request to connect to server */
24: #define MQTT_TYPE_CONNACK 2 /* connect acknowledgment */
25: #define MQTT_TYPE_PUBLISH 3 /* publish message */
26: #define MQTT_TYPE_PUBACK 4 /* publish acknowledgment */
27: #define MQTT_TYPE_PUBREC 5 /* publish received (assured delivery part 1) */
28: #define MQTT_TYPE_PUBREL 6 /* publish release (assured delivery part 2) */
29: #define MQTT_TYPE_PUBCOMP 7 /* publish complete (assured delivery part 3) */
30: #define MQTT_TYPE_SUBSCRIBE 8 /* client subscribe request */
31: #define MQTT_TYPE_SUBACK 9 /* subscribe acknowledgment */
32: #define MQTT_TYPE_UNSUBSCRIBE 10 /* client unsubscribe request */
33: #define MQTT_TYPE_UNSUBACK 11 /* unsubscribe acknowledgment */
34: #define MQTT_TYPE_PINGREQ 12 /* PING request */
35: #define MQTT_TYPE_PINGRESP 13 /* PING response */
36: #define MQTT_TYPE_DISCONNECT 14 /* client is disconnecting */
37: #define MQTT_TYPE_RESERVED 15 /* reserved */
38:
39: #define MQTT_FLAG_DUP 1 /* This flag is set when the client or server attempts to re-deliver
40: a PUBLISH, PUBREL, SUBSCRIBE or UNSUBSCRIBE message.
41: This applies to messages where the value of QoS is greater than
42: zero (0), and an acknowledgment is required.
43: When the DUP bit is set, the variable header includes a Message ID.
44:
45: The recipient should treat this flag as a hint as to whether
46: the message may have been previously received.
47: It should not be relied on to detect duplicates. */
48:
49: #define MQTT_QOS_ONCE 0 /* At most once, Fire and Forget, <=1 */
50: #define MQTT_QOS_ACK 1 /* At least once, Acknowledged delivery, >=1 */
51: #define MQTT_QOS_EXACTLY 2 /* Exactly once, Assured delivery, =1 */
52: #define MQTT_QOS_RESERVED 3 /* reserved */
53:
54: #define MQTT_FLAG_RETAIN 1 /* This flag is only used on PUBLISH messages.
55:
56: When a client sends a PUBLISH to a server,
57: if the Retain flag is set (1),
58: the server should hold on to the message after it has been
59: delivered to the current subscribers.
60: When a new subscription is established on a topic,
61: the last retained message on that topic should be sent to
62: the subscriber with the Retain flag set.
63: If there is no retained message, nothing is sent
64: This is useful where publishers send messages on a
65: "report by exception" basis, where it might be some time between messages.
66: This allows new subscribers to instantly receive data with the retained,
67: or Last Known Good, value.
68:
69: When a server sends a PUBLISH to a client as a result of
70: a subscription that already existed when the original PUBLISH arrived,
71: the Retain flag should not be set, regardless of the Retain flag
72: of the original PUBLISH. This allows a client to distinguish messages
73: that are being received because they were retained and those
74: that are being received "live".
75:
76: Retained messages should be kept over restarts of the server.
77: A server may delete a retained message if it receives a message
78: with a zero-length payload and the Retain flag set on the same topic. */
79:
1.1.1.1.2.4! misho 80: /* VARIABLE HEADERS */
! 81:
! 82: #define MQTT_RETCODE_ACCEPTED 0
! 83: #define MQTT_RETCODE_REFUSE_VER 1
! 84: #define MQTT_RETCODE_REFUSE_ID 2
! 85: #define MQTT_RETCODE_REFUSE_UNAVAIL 3
! 86: #define MQTT_RETCODE_REFUSE_USERPASS 4
! 87: #define MQTT_RETCODE_DENIED 5
! 88:
! 89:
! 90: typedef union {
! 91: struct {
! 92: unsigned short m:8,
! 93: l:8;
! 94: } sb;
! 95: unsigned short val;
! 96: } mqtthdr_val_t;
! 97:
! 98: typedef struct {
! 99: mqtthdr_val_t var_sb;
! 100: unsigned char var_data[0];
! 101: } __packed mqtthdr_var_t;
! 102:
! 103: typedef unsigned char mqtthdr_protover_t;
! 104: typedef unsigned char mqtthdr_retcode_t;
! 105:
! 106: typedef struct {
! 107: unsigned char reserved:1,
! 108: clean_sess:1,
! 109: will_flg:1,
! 110: will_qos:2,
! 111: will_retain:1,
! 112: password:1,
! 113: username:1;
! 114: } __packed mqtthdr_connflgs_t;
! 115:
1.1.1.1.2.1 misho 116:
1.1 misho 117: // -------------------------------------------------------
118: // mqtt_GetErrno() Get error code of last operation
119: inline int mqtt_GetErrno();
120: // mqtt_GetError() Get error text of last operation
121: inline const char *mqtt_GetError();
122: // -------------------------------------------------------
123:
124:
1.1.1.1.2.1 misho 125: /*
126: * mqtt_encodeLen() Encode number to MQTT length field
127: * @num = number for encode
128: * return: -1 error or >-1 length
129: */
130: inline unsigned int mqtt_encodeLen(unsigned int num);
131: /*
132: * mqtt_decodeLen() Decode length from MQTT packet
133: * @len = length
1.1.1.1.2.2 misho 134: * @n = sizeof bytes, if !=NULL
1.1.1.1.2.1 misho 135: * return: -1 error, >-1 length of message
136: */
1.1.1.1.2.2 misho 137: inline unsigned int mqtt_decodeLen(unsigned int len, char *n);
138: /*
139: * mqtt_sizeLen Return sizeof len field
140: * @len = length
141: * return: -1 error, >-1 sizeof len in bytes
142: */
143: inline char mqtt_sizeLen(unsigned int len);
1.1.1.1.2.4! misho 144: /*
! 145: * mqtt_str2var Create MQTT variable from string
! 146: * @csStr = string
! 147: * @strLen = string length
! 148: * return: NULL error or != ok variable, must be free after use!
! 149: */
! 150: inline mqtthdr_var_t *mqtt_str2var(const unsigned char *csStr, unsigned short strLen);
1.1.1.1.2.1 misho 151:
152:
1.1 misho 153: #endif
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>