Diff for /mqtt/install-sh between versions 1.1 and 1.2

version 1.1, 2012/07/03 09:20:48 version 1.2, 2012/07/03 12:45:59
Line 0 Line 1
   #!/bin/sh
   #
   # install - install a program, script, or datafile
   # This comes from X11R5 (mit/util/scripts/install.sh).
   #
   # Copyright 1991 by the Massachusetts Institute of Technology
   #
   # Permission to use, copy, modify, distribute, and sell this software and its
   # documentation for any purpose is hereby granted without fee, provided that
   # the above copyright notice appear in all copies and that both that
   # copyright notice and this permission notice appear in supporting
   # documentation, and that the name of M.I.T. not be used in advertising or
   # publicity pertaining to distribution of the software without specific,
   # written prior permission.  M.I.T. makes no representations about the
   # suitability of this software for any purpose.  It is provided "as is"
   # without express or implied warranty.
   #
   # Calling this script install-sh is preferred over install.sh, to prevent
   # `make' implicit rules from creating a file called install from it
   # when there is no Makefile.
   #
   # This script is compatible with the BSD install script, but was written
   # from scratch.  It can only install one file at a time, a restriction
   # shared with many OS's install programs.
   
   
   # set DOITPROG to echo to test this script
   
   # Don't use :- since 4.3BSD and earlier shells don't like it.
   doit="${DOITPROG-}"
   
   
   # put in absolute paths if you don't have them in your path; or use env. vars.
   
   mvprog="${MVPROG-mv}"
   cpprog="${CPPROG-cp}"
   chmodprog="${CHMODPROG-chmod}"
   chownprog="${CHOWNPROG-chown}"
   chgrpprog="${CHGRPPROG-chgrp}"
   stripprog="${STRIPPROG-strip}"
   rmprog="${RMPROG-rm}"
   mkdirprog="${MKDIRPROG-mkdir}"
   
   transformbasename=""
   transform_arg=""
   instcmd="$mvprog"
   chmodcmd="$chmodprog 0755"
   chowncmd=""
   chgrpcmd=""
   stripcmd=""
   rmcmd="$rmprog -f"
   mvcmd="$mvprog"
   src=""
   dst=""
   dir_arg=""
   
   while [ x"$1" != x ]; do
       case $1 in
           -c) instcmd="$cpprog"
               shift
               continue;;
   
           -d) dir_arg=true
               shift
               continue;;
   
           -m) chmodcmd="$chmodprog $2"
               shift
               shift
               continue;;
   
           -o) chowncmd="$chownprog $2"
               shift
               shift
               continue;;
   
           -g) chgrpcmd="$chgrpprog $2"
               shift
               shift
               continue;;
   
           -s) stripcmd="$stripprog"
               shift
               continue;;
   
           -t=*) transformarg=`echo $1 | sed 's/-t=//'`
               shift
               continue;;
   
           -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
               shift
               continue;;
   
           *)  if [ x"$src" = x ]
               then
                   src=$1
               else
                   # this colon is to work around a 386BSD /bin/sh bug
                   :
                   dst=$1
               fi
               shift
               continue;;
       esac
   done
   
   if [ x"$src" = x ]
   then
           echo "install:  no input file specified"
           exit 1
   else
           true
   fi
   
   if [ x"$dir_arg" != x ]; then
           dst=$src
           src=""
           
           if [ -d $dst ]; then
                   instcmd=:
                   chmodcmd=""
           else
                   instcmd=mkdir
           fi
   else
   
   # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
   # might cause directories to be created, which would be especially bad 
   # if $src (and thus $dsttmp) contains '*'.
   
           if [ -f $src -o -d $src ]
           then
                   true
           else
                   echo "install:  $src does not exist"
                   exit 1
           fi
           
           if [ x"$dst" = x ]
           then
                   echo "install:  no destination specified"
                   exit 1
           else
                   true
           fi
   
   # If destination is a directory, append the input filename; if your system
   # does not like double slashes in filenames, you may need to add some logic
   
           if [ -d $dst ]
           then
                   dst="$dst"/`basename $src`
           else
                   true
           fi
   fi
   
   ## this sed command emulates the dirname command
   dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
   
   # Make sure that the destination directory exists.
   #  this part is taken from Noah Friedman's mkinstalldirs script
   
   # Skip lots of stat calls in the usual case.
   if [ ! -d "$dstdir" ]; then
   defaultIFS='    
   '
   IFS="${IFS-${defaultIFS}}"
   
   oIFS="${IFS}"
   # Some sh's can't handle IFS=/ for some reason.
   IFS='%'
   set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
   IFS="${oIFS}"
   
   pathcomp=''
   
   while [ $# -ne 0 ] ; do
           pathcomp="${pathcomp}${1}"
           shift
   
           if [ ! -d "${pathcomp}" ] ;
           then
                   $mkdirprog "${pathcomp}"
           else
                   true
           fi
   
           pathcomp="${pathcomp}/"
   done
   fi
   
   if [ x"$dir_arg" != x ]
   then
           $doit $instcmd $dst &&
   
           if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
           if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
           if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
           if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
   else
   
   # If we're going to rename the final executable, determine the name now.
   
           if [ x"$transformarg" = x ] 
           then
                   dstfile=`basename $dst`
           else
                   dstfile=`basename $dst $transformbasename | 
                           sed $transformarg`$transformbasename
           fi
   
   # don't allow the sed command to completely eliminate the filename
   
           if [ x"$dstfile" = x ] 
           then
                   dstfile=`basename $dst`
           else
                   true
           fi
   
   # Make a temp file name in the proper directory.
   
           dsttmp=$dstdir/#inst.$$#
   
   # Move or copy the file name to the temp name
   
           $doit $instcmd $src $dsttmp &&
   
           trap "rm -f ${dsttmp}" 0 &&
   
   # and set any options; do chmod last to preserve setuid bits
   
   # If any of these fail, we abort the whole thing.  If we want to
   # ignore errors from any of these, just make sure not to ignore
   # errors from the above "$doit $instcmd $src $dsttmp" command.
   
           if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
           if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
           if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
           if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
   
   # Now rename the file to the real destination.
   
           $doit $rmcmd -f $dstdir/$dstfile &&
           $doit $mvcmd $dsttmp $dstdir/$dstfile 
   
   fi &&
   
   
   exit 0

Removed from v.1.1  
changed lines
  Added in v.1.2


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>