# WAN network interface ext_ifname=ed0 # if the WAN interface has several IP addresses, you # can specify the one to use below #ext_ip= # there can be multiple listening ips for receiving SSDP traffic. # the 1st IP is also used for UPnP Soap traffic. #listening_ip= 192.168.0.61 listening_ip=10.0.2.1 # port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect. port=5555 # path to the unix socket used to communicate with MiniSSDPd # If running, MiniSSDPd will manage M-SEARCH answering. # default is /var/run/minissdpd.sock #minissdpdsocket=/var/run/minissdpd.sock # enable NAT-PMP support (default is no) #enable_natpmp=no # lease file location #lease_file=/var/log/upnp.leases # bitrates reported by daemon in bits per second bitrate_up=131072 bitrate_down=524288 # "secure" mode : when enabled, UPnP client are allowed to add mappings only # to their IP. (default is yes) #secure_mode=yes # default presentation url is http address on port 80 #presentation_url= # report system uptime instead of daemon uptime system_uptime=yes # unused rules cleaning. # never remove any rule before this threshold for the number # of redirections is exceeded. default to 20 #clean_ruleset_threshold=10 # clean process work interval in seconds. default to 0 (disabled). # a 600 seconds (10 minutes) interval makes sense clean_ruleset_interval=600 # notify interval in seconds default is 30 seconds. #notify_interval=240 # log packets in pf #packet_log=no # ALTQ queue in pf # filter rules must be used for this to be used. # compile with PF_ENABLE_FILTER_RULES (see config.h file) #queue=queue_name1 # uuid : generated by the install a new one can be created with # uuidgen uuid=9db6dc04-5a13-11df-be4d-001a4b8df55b # UPnP permission rules # (allow|deny) (external port range) ip/mask (internal port range) # A port range is - or if there is only # one port in the range. # ip/mask format must be nn.nn.nn.nn/nn allow 1024-65535 10.0.2.0/24 1024-65535 allow 1024-65535 10.0.2.0/24 1024-65535 deny 0-65535 0.0.0.0/0 0-65535