This is quagga.info, produced by makeinfo version 4.13 from quagga.texi. Copyright (C) 1999-2005 Kunihiro Ishiguro, et al. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by Kunihiro Ishiguro. INFO-DIR-SECTION Routing Software: START-INFO-DIR-ENTRY * Quagga: (quagga). The Quagga Software Routing Suite END-INFO-DIR-ENTRY This file documents the Quagga Software Routing Suite which manages common TCP/IP routing protocols. This is Edition 1.0.20160315, last updated 15 March 2016 of `The Quagga Manual', for Quagga Version 1.0.20160315. Copyright (C) 1999-2005 Kunihiro Ishiguro, et al. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by Kunihiro Ishiguro.  File: quagga.info, Node: Command Index, Next: VTY Key Index, Prev: Packet Binary Dump Format, Up: Top Command Index ************* [index] * Menu: * access-class ACCESS-LIST: Basic Config Commands. (line 142) * access-list NAME deny IPV4-NETWORK: IP Access List. (line 8) * access-list NAME permit IPV4-NETWORK: IP Access List. (line 7) * agentx: MIB and command reference. (line 35) * aggregate-address A.B.C.D/M: Route Aggregation. (line 7) * aggregate-address A.B.C.D/M as-set: Route Aggregation. (line 10) * aggregate-address A.B.C.D/M summary-only: Route Aggregation. (line 14) * area <0-4294967295> authentication: OSPF area. (line 127) * area <0-4294967295> authentication message-digest: OSPF area. (line 134) * area <0-4294967295> export-list NAME: OSPF area. (line 85) * area <0-4294967295> filter-list prefix NAME in: OSPF area. (line 117) * area <0-4294967295> filter-list prefix NAME out: OSPF area. (line 118) * area <0-4294967295> import-list NAME: OSPF area. (line 109) * area <0-4294967295> range A.B.C.D/M: OSPF area. (line 8) * area <0-4294967295> shortcut: OSPF area. (line 55) * area <0-4294967295> stub: OSPF area. (line 62) * area <0-4294967295> stub no-summary: OSPF area. (line 74) * area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 50) * area A.B.C.D authentication: OSPF area. (line 126) * area A.B.C.D authentication message-digest: OSPF area. (line 133) * area A.B.C.D default-cost <0-16777215>: OSPF area. (line 80) * area A.B.C.D export-list NAME: OSPF area. (line 84) * area A.B.C.D filter-list prefix NAME in: OSPF area. (line 115) * area A.B.C.D filter-list prefix NAME out: OSPF area. (line 116) * area A.B.C.D import-list NAME: OSPF area. (line 108) * area A.B.C.D range A.B.C.D/M: OSPF area. (line 7) * area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 28) * area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area. (line 34) * area A.B.C.D shortcut: OSPF area. (line 54) * area A.B.C.D stub: OSPF area. (line 61) * area A.B.C.D stub no-summary: OSPF area. (line 73) * area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 49) * auto-cost reference-bandwidth <1-4294967>: OSPF router. (line 163) * auto-cost reference-bandwidth COST: OSPF6 router. (line 51) * bandwidth <1-10000000>: Interface Commands. (line 31) * banner motd default: Basic Config Commands. (line 124) * bgp always-compare-med: BGP MED. (line 230) * bgp bestpath as-path confed: BGP decision process. (line 66) * bgp bestpath as-path multipath-relax: BGP decision process. (line 71) * bgp bestpath compare-routerid: BGP decision process. (line 77) * bgp cluster-id A.B.C.D: Route Reflector. (line 7) * bgp config-type cisco: Multiple instance. (line 20) * bgp config-type zebra: Multiple instance. (line 53) * bgp dampening <1-45> <1-20000> <1-20000> <1-255>: BGP route flap dampening. (line 7) * bgp deterministic-med: BGP MED. (line 212) * bgp multiple-instance: Multiple instance. (line 10) * bgp router-id A.B.C.D: BGP router. (line 22) * call NAME: Route Map Call Command. (line 7) * call WORD: Commands for configuring a Route Server. (line 52) * clear ip bgp PEER: More Show IP BGP. (line 25) * clear ip bgp PEER soft in: More Show IP BGP. (line 28) * clear ip prefix-list: Clear counter of ip prefix-list. (line 7) * clear ip prefix-list NAME: Clear counter of ip prefix-list. (line 11) * clear ip prefix-list NAME A.B.C.D/M: Clear counter of ip prefix-list. (line 13) * clear zebra fpm stats: zebra Terminal Mode Commands. (line 41) * configure terminal: Terminal Mode Commands. (line 13) * continue: Route Map Exit Action Command. (line 8) * continue N: Route Map Exit Action Command. (line 12) * debug event: More Show IP BGP. (line 39) * debug keepalive: More Show IP BGP. (line 43) * debug ospf ism: Debugging OSPF. (line 12) * debug ospf ism (status|events|timers): Debugging OSPF. (line 13) * debug ospf lsa: Debugging OSPF. (line 22) * debug ospf lsa (generate|flooding|refresh): Debugging OSPF. (line 23) * debug ospf nsm: Debugging OSPF. (line 17) * debug ospf nsm (status|events|timers): Debugging OSPF. (line 18) * debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF. (line 8) * debug ospf zebra: Debugging OSPF. (line 27) * debug ospf zebra (interface|redistribute): Debugging OSPF. (line 28) * debug rip events: RIP Debug Commands. (line 9) * debug rip packet: RIP Debug Commands. (line 15) * debug rip zebra: RIP Debug Commands. (line 22) * debug ripng events: ripngd Terminal Mode Commands. (line 11) * debug ripng packet: ripngd Terminal Mode Commands. (line 13) * debug ripng zebra: ripngd Terminal Mode Commands. (line 15) * debug update: More Show IP BGP. (line 41) * default-information originate <1>: Redistribute routes to OSPF. (line 37) * default-information originate: How to Announce RIP route. (line 51) * default-information originate always: Redistribute routes to OSPF. (line 43) * default-information originate always metric <0-16777214>: Redistribute routes to OSPF. (line 45) * default-information originate always metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF. (line 47) * default-information originate always metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF. (line 49) * default-information originate metric <0-16777214>: Redistribute routes to OSPF. (line 38) * default-information originate metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF. (line 40) * default-information originate metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF. (line 42) * default-metric <0-16777214>: Redistribute routes to OSPF. (line 65) * default-metric <1-16>: RIP Metric Manipulation. (line 11) * description DESCRIPTION ...: Interface Commands. (line 24) * distance <1-255> <1>: Redistribute routes to OSPF. (line 68) * distance <1-255>: RIP distance. (line 9) * distance <1-255> A.B.C.D/M <1>: BGP distance. (line 12) * distance <1-255> A.B.C.D/M: RIP distance. (line 13) * distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 18) * distance <1-255> A.B.C.D/M WORD: BGP distance. (line 13) * distance bgp <1-255> <1-255> <1-255>: BGP distance. (line 7) * distance ospf (intra-area|inter-area|external) <1-255>: Redistribute routes to OSPF. (line 72) * distribute-list ACCESS_LIST (in|out) IFNAME: ripngd Filtering Commands. (line 7) * distribute-list ACCESS_LIST DIRECT IFNAME: Filtering RIP Routes. (line 9) * distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF. (line 58) * distribute-list prefix PREFIX_LIST (in|out) IFNAME: Filtering RIP Routes. (line 32) * dump bgp all PATH [INTERVAL]: Dump BGP packets and table. (line 7) * dump bgp all-et PATH [INTERVAL]: Dump BGP packets and table. (line 8) * dump bgp routes-mrt PATH: Dump BGP packets and table. (line 25) * dump bgp routes-mrt PATH INTERVAL: Dump BGP packets and table. (line 26) * dump bgp updates PATH [INTERVAL]: Dump BGP packets and table. (line 16) * dump bgp updates-et PATH [INTERVAL]: Dump BGP packets and table. (line 17) * enable password PASSWORD: Basic Config Commands. (line 14) * exec-timeout MINUTE: Basic Config Commands. (line 130) * exec-timeout MINUTE SECOND: Basic Config Commands. (line 131) * flush_timer TIME: ripngd Configuration. (line 12) * hostname HOSTNAME: Basic Config Commands. (line 7) * interface IFNAME: Interface Commands. (line 7) * interface IFNAME area AREA: OSPF6 router. (line 12) * ip address ADDRESS/PREFIX: Interface Commands. (line 13) * ip address ADDRESS/PREFIX secondary: Interface Commands. (line 19) * ip as-path access-list WORD {permit|deny} LINE: AS Path Access List. (line 9) * ip community-list <1-99> {permit|deny} COMMUNITY: Numbered BGP Community Lists. (line 14) * ip community-list <100-199> {permit|deny} COMMUNITY: Numbered BGP Community Lists. (line 20) * ip community-list expanded NAME {permit|deny} LINE: BGP Community Lists. (line 30) * ip community-list NAME {permit|deny} COMMUNITY: Numbered BGP Community Lists. (line 25) * ip community-list standard NAME {permit|deny} COMMUNITY: BGP Community Lists. (line 20) * ip extcommunity-list expanded NAME {permit|deny} LINE: BGP Extended Community Lists. (line 21) * ip extcommunity-list standard NAME {permit|deny} EXTCOMMUNITY: BGP Extended Community Lists. (line 10) * ip mroute PREFIX NEXTHOP [DISTANCE]: Multicast RIB Commands. (line 72) * ip multicast rpf-lookup-mode MODE: Multicast RIB Commands. (line 19) * ip ospf area AREA [ADDR]: OSPF interface. (line 7) * ip ospf authentication message-digest: OSPF interface. (line 29) * ip ospf authentication-key AUTH_KEY: OSPF interface. (line 19) * ip ospf cost <1-65535>: OSPF interface. (line 57) * ip ospf dead-interval <1-65535>: OSPF interface. (line 62) * ip ospf dead-interval minimal hello-multiplier <2-20>: OSPF interface. (line 64) * ip ospf hello-interval <1-65535>: OSPF interface. (line 81) * ip ospf message-digest-key KEYID md5 KEY: OSPF interface. (line 45) * ip ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point): OSPF interface. (line 92) * ip ospf priority <0-255>: OSPF interface. (line 96) * ip ospf retransmit-interval <1-65535>: OSPF interface. (line 103) * ip ospf transmit-delay: OSPF interface. (line 109) * ip prefix-list NAME (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List. (line 16) * ip prefix-list NAME description DESC: ip prefix-list description. (line 7) * ip prefix-list NAME seq NUMBER (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List. (line 18) * ip prefix-list sequence-number: ip prefix-list sequential number control. (line 7) * ip protocol PROTOCOL route-map ROUTEMAP: zebra Route Filtering. (line 12) * ip rip authentication key-chain KEY-CHAIN: RIP Authentication. (line 43) * ip rip authentication mode md5: RIP Authentication. (line 29) * ip rip authentication mode text: RIP Authentication. (line 33) * ip rip authentication string STRING: RIP Authentication. (line 37) * ip rip receive version VERSION: RIP Version Control. (line 44) * ip rip send version VERSION: RIP Version Control. (line 33) * ip route NETWORK GATEWAY: Static Route Commands. (line 10) * ip route NETWORK GATEWAY DISTANCE: Static Route Commands. (line 36) * ip route NETWORK NETMASK GATEWAY: Static Route Commands. (line 25) * ip split-horizon: RIP Configuration. (line 70) * ipv6 address ADDRESS/PREFIX: Interface Commands. (line 14) * ipv6 nd adv-interval-option: Router Advertisement. (line 127) * ipv6 nd home-agent-config-flag: Router Advertisement. (line 101) * ipv6 nd home-agent-lifetime <0-65520>: Router Advertisement. (line 118) * ipv6 nd home-agent-preference <0-65535>: Router Advertisement. (line 109) * ipv6 nd managed-config-flag: Router Advertisement. (line 84) * ipv6 nd mtu <1-65535>: Router Advertisement. (line 142) * ipv6 nd other-config-flag: Router Advertisement. (line 93) * ipv6 nd prefix IPV6PREFIX [VALID-LIFETIME] [PREFERRED-LIFETIME] [off-link] [no-autoconfig] [router-address]: Router Advertisement. (line 14) * ipv6 nd ra-interval <1-1800>: Router Advertisement. (line 49) * ipv6 nd ra-interval msec <70-1800000>: Router Advertisement. (line 56) * ipv6 nd ra-lifetime <0-9000>: Router Advertisement. (line 63) * ipv6 nd reachable-time <1-3600000>: Router Advertisement. (line 75) * ipv6 nd router-preference (high|medium|low): Router Advertisement. (line 135) * ipv6 nd suppress-ra: Router Advertisement. (line 10) * ipv6 ospf6 cost COST: OSPF6 interface. (line 7) * ipv6 ospf6 dead-interval DEADINTERVAL: OSPF6 interface. (line 14) * ipv6 ospf6 hello-interval HELLOINTERVAL: OSPF6 interface. (line 11) * ipv6 ospf6 network (broadcast|point-to-point): OSPF6 interface. (line 27) * ipv6 ospf6 priority PRIORITY: OSPF6 interface. (line 21) * ipv6 ospf6 retransmit-interval RETRANSMITINTERVAL: OSPF6 interface. (line 18) * ipv6 ospf6 transmit-delay TRANSMITDELAY: OSPF6 interface. (line 24) * ipv6 route NETWORK GATEWAY: Static Route Commands. (line 77) * ipv6 route NETWORK GATEWAY DISTANCE: Static Route Commands. (line 78) * line vty: Basic Config Commands. (line 121) * link-detect: Interface Commands. (line 37) * list: Terminal Mode Commands. (line 24) * log facility FACILITY: Basic Config Commands. (line 81) * log file FILENAME: Basic Config Commands. (line 41) * log file FILENAME LEVEL: Basic Config Commands. (line 42) * log monitor: Basic Config Commands. (line 68) * log monitor LEVEL: Basic Config Commands. (line 69) * log record-priority: Basic Config Commands. (line 87) * log stdout: Basic Config Commands. (line 28) * log stdout LEVEL: Basic Config Commands. (line 29) * log syslog: Basic Config Commands. (line 59) * log syslog LEVEL: Basic Config Commands. (line 60) * log timestamp precision <0-6>: Basic Config Commands. (line 97) * log trap LEVEL: Basic Config Commands. (line 17) * log-adjacency-changes [detail]: OSPF router. (line 73) * logmsg LEVEL MESSAGE: Terminal Mode Commands. (line 34) * match as-path WORD: Using AS Path in Route Map. (line 7) * match aspath AS_PATH: Route Map Match Command. (line 13) * match community COMMUNITY_LIST: Route Map Match Command. (line 19) * match community WORD: BGP Community in Route Map. (line 13) * match community WORD exact-match: BGP Community in Route Map. (line 14) * match extcommunity WORD: BGP Extended Communities in Route Map. (line 7) * match interface WORD: RIP route-map. (line 26) * match ip address ACCESS_LIST: Route Map Match Command. (line 7) * match ip address prefix-list WORD: RIP route-map. (line 39) * match ip address WORD: RIP route-map. (line 38) * match ip next-hop IPV4_ADDR: Route Map Match Command. (line 10) * match ip next-hop prefix-list WORD: RIP route-map. (line 43) * match ip next-hop WORD: RIP route-map. (line 42) * match metric <0-4294967295>: RIP route-map. (line 48) * match metric METRIC: Route Map Match Command. (line 16) * match peer {A.B.C.D|X:X::X:X}: Commands for configuring a Route Server. (line 34) * max-metric router-lsa [on-startup|on-shutdown] <5-86400>: OSPF router. (line 130) * max-metric router-lsa administrative: OSPF router. (line 131) * multicast: Interface Commands. (line 27) * neigbor {A.B.C.D|X.X::X.X|peer-group} route-map WORD {import|export}: Commands for configuring a Route Server. (line 29) * neighbor A.B.C.D: RIP Configuration. (line 34) * neighbor A.B.C.D route-server-client: Commands for configuring a Route Server. (line 11) * neighbor PEER default-originate: BGP Peer commands. (line 61) * neighbor PEER description ...: BGP Peer commands. (line 20) * neighbor PEER distribute-list NAME [in|out]: Peer filtering. (line 7) * neighbor PEER dont-capability-negotiate: Capability Negotiation. (line 51) * neighbor PEER ebgp-multihop: BGP Peer commands. (line 17) * neighbor PEER filter-list NAME [in|out]: Peer filtering. (line 13) * neighbor PEER interface IFNAME: BGP Peer commands. (line 33) * neighbor PEER local-as AS-NUMBER: BGP Peer commands. (line 81) * neighbor PEER local-as AS-NUMBER no-prepend: BGP Peer commands. (line 82) * neighbor PEER local-as AS-NUMBER no-prepend replace-as: BGP Peer commands. (line 83) * neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 78) * neighbor PEER next-hop-self [all]: BGP Peer commands. (line 43) * neighbor PEER override-capability: Capability Negotiation. (line 67) * neighbor PEER peer-group WORD: BGP Peer Group. (line 10) * neighbor PEER port PORT: BGP Peer commands. (line 67) * neighbor PEER prefix-list NAME [in|out]: Peer filtering. (line 11) * neighbor PEER remote-as ASN: Defining Peer. (line 7) * neighbor PEER route-map NAME [in|out]: Peer filtering. (line 15) * neighbor PEER route-reflector-client: Route Reflector. (line 9) * neighbor PEER send-community: BGP Peer commands. (line 70) * neighbor PEER shutdown: BGP Peer commands. (line 10) * neighbor PEER strict-capability-match: Capability Negotiation. (line 40) * neighbor PEER ttl-security hops NUMBER: BGP Peer commands. (line 102) * neighbor PEER update-source : BGP Peer commands. (line 50) * neighbor PEER version VERSION: BGP Peer commands. (line 24) * neighbor PEER weight WEIGHT: BGP Peer commands. (line 73) * neighbor PEER-GROUP route-server-client: Commands for configuring a Route Server. (line 10) * neighbor WORD peer-group: BGP Peer Group. (line 7) * neighbor X:X::X:X route-server-client: Commands for configuring a Route Server. (line 12) * network A.B.C.D/M: BGP route. (line 7) * network A.B.C.D/M area <0-4294967295>: OSPF router. (line 175) * network A.B.C.D/M area A.B.C.D: OSPF router. (line 174) * network IFNAME <1>: ripngd Configuration. (line 18) * network IFNAME: RIP Configuration. (line 27) * network NETWORK <1>: ripngd Configuration. (line 15) * network NETWORK: RIP Configuration. (line 15) * no agentx: MIB and command reference. (line 36) * no aggregate-address A.B.C.D/M: Route Aggregation. (line 18) * no area <0-4294967295> authentication: OSPF area. (line 129) * no area <0-4294967295> export-list NAME: OSPF area. (line 87) * no area <0-4294967295> filter-list prefix NAME in: OSPF area. (line 121) * no area <0-4294967295> filter-list prefix NAME out: OSPF area. (line 122) * no area <0-4294967295> import-list NAME: OSPF area. (line 111) * no area <0-4294967295> range A.B.C.D/M: OSPF area. (line 10) * no area <0-4294967295> shortcut: OSPF area. (line 57) * no area <0-4294967295> stub: OSPF area. (line 64) * no area <0-4294967295> stub no-summary: OSPF area. (line 76) * no area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 52) * no area A.B.C.D authentication: OSPF area. (line 128) * no area A.B.C.D default-cost <0-16777215>: OSPF area. (line 81) * no area A.B.C.D export-list NAME: OSPF area. (line 86) * no area A.B.C.D filter-list prefix NAME in: OSPF area. (line 119) * no area A.B.C.D filter-list prefix NAME out: OSPF area. (line 120) * no area A.B.C.D import-list NAME: OSPF area. (line 110) * no area A.B.C.D range A.B.C.D/M: OSPF area. (line 9) * no area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 29) * no area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area. (line 36) * no area A.B.C.D shortcut: OSPF area. (line 56) * no area A.B.C.D stub: OSPF area. (line 63) * no area A.B.C.D stub no-summary: OSPF area. (line 75) * no area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 51) * no auto-cost reference-bandwidth <1>: OSPF6 router. (line 52) * no auto-cost reference-bandwidth: OSPF router. (line 164) * no bandwidth <1-10000000>: Interface Commands. (line 32) * no banner motd: Basic Config Commands. (line 127) * no bgp multiple-instance: Multiple instance. (line 14) * no debug event: More Show IP BGP. (line 45) * no debug keepalive: More Show IP BGP. (line 49) * no debug ospf ism: Debugging OSPF. (line 14) * no debug ospf ism (status|events|timers): Debugging OSPF. (line 15) * no debug ospf lsa: Debugging OSPF. (line 24) * no debug ospf lsa (generate|flooding|refresh): Debugging OSPF. (line 25) * no debug ospf nsm: Debugging OSPF. (line 19) * no debug ospf nsm (status|events|timers): Debugging OSPF. (line 20) * no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF. (line 10) * no debug ospf zebra: Debugging OSPF. (line 29) * no debug ospf zebra (interface|redistribute): Debugging OSPF. (line 30) * no debug update: More Show IP BGP. (line 47) * no default-information originate: Redistribute routes to OSPF. (line 50) * no default-metric: Redistribute routes to OSPF. (line 66) * no default-metric <1-16>: RIP Metric Manipulation. (line 12) * no distance <1-255> <1>: Redistribute routes to OSPF. (line 69) * no distance <1-255>: RIP distance. (line 10) * no distance <1-255> A.B.C.D/M: RIP distance. (line 14) * no distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 19) * no distance ospf: Redistribute routes to OSPF. (line 73) * no distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF. (line 60) * no dump bgp all [PATH] [INTERVAL]: Dump BGP packets and table. (line 9) * no dump bgp route-mrt [PATH] [INTERVAL]: Dump BGP packets and table. (line 27) * no dump bgp updates [PATH] [INTERVAL]: Dump BGP packets and table. (line 18) * no exec-timeout: Basic Config Commands. (line 138) * no ip address ADDRESS/PREFIX: Interface Commands. (line 15) * no ip address ADDRESS/PREFIX secondary: Interface Commands. (line 20) * no ip as-path access-list WORD: AS Path Access List. (line 12) * no ip as-path access-list WORD {permit|deny} LINE: AS Path Access List. (line 13) * no ip community-list expanded NAME: BGP Community Lists. (line 37) * no ip community-list NAME: BGP Community Lists. (line 35) * no ip community-list standard NAME: BGP Community Lists. (line 36) * no ip extcommunity-list expanded NAME: BGP Extended Community Lists. (line 29) * no ip extcommunity-list NAME: BGP Extended Community Lists. (line 27) * no ip extcommunity-list standard NAME: BGP Extended Community Lists. (line 28) * no ip mroute PREFIX NEXTHOP [DISTANCE]: Multicast RIB Commands. (line 73) * no ip multicast rpf-lookup-mode [MODE]: Multicast RIB Commands. (line 20) * no ip ospf area [ADDR]: OSPF interface. (line 8) * no ip ospf authentication-key: OSPF interface. (line 20) * no ip ospf cost: OSPF interface. (line 58) * no ip ospf dead-interval: OSPF interface. (line 65) * no ip ospf hello-interval: OSPF interface. (line 82) * no ip ospf message-digest-key: OSPF interface. (line 46) * no ip ospf network: OSPF interface. (line 93) * no ip ospf priority: OSPF interface. (line 97) * no ip ospf retransmit interval: OSPF interface. (line 104) * no ip ospf transmit-delay: OSPF interface. (line 110) * no ip prefix-list NAME: IP Prefix List. (line 67) * no ip prefix-list NAME description [DESC]: ip prefix-list description. (line 11) * no ip prefix-list sequence-number: ip prefix-list sequential number control. (line 11) * no ip rip authentication key-chain KEY-CHAIN: RIP Authentication. (line 44) * no ip rip authentication mode md5: RIP Authentication. (line 30) * no ip rip authentication mode text: RIP Authentication. (line 34) * no ip rip authentication string STRING: RIP Authentication. (line 38) * no ip split-horizon: RIP Configuration. (line 71) * no ipv6 address ADDRESS/PREFIX: Interface Commands. (line 16) * no ipv6 nd adv-interval-option: Router Advertisement. (line 128) * no ipv6 nd home-agent-config-flag: Router Advertisement. (line 102) * no ipv6 nd home-agent-lifetime [<0-65520>]: Router Advertisement. (line 119) * no ipv6 nd home-agent-preference [<0-65535>]: Router Advertisement. (line 110) * no ipv6 nd managed-config-flag: Router Advertisement. (line 85) * no ipv6 nd mtu [<1-65535>]: Router Advertisement. (line 143) * no ipv6 nd other-config-flag: Router Advertisement. (line 94) * no ipv6 nd ra-interval [<1-1800>]: Router Advertisement. (line 50) * no ipv6 nd ra-interval [msec <70-1800000>]: Router Advertisement. (line 57) * no ipv6 nd ra-lifetime [<0-9000>]: Router Advertisement. (line 64) * no ipv6 nd reachable-time [<1-3600000>]: Router Advertisement. (line 76) * no ipv6 nd router-preference [(high|medium|low)]: Router Advertisement. (line 136) * no ipv6 nd suppress-ra: Router Advertisement. (line 7) * no link-detect: Interface Commands. (line 38) * no log facility: Basic Config Commands. (line 82) * no log file: Basic Config Commands. (line 43) * no log monitor: Basic Config Commands. (line 70) * no log record-priority: Basic Config Commands. (line 88) * no log stdout: Basic Config Commands. (line 30) * no log syslog: Basic Config Commands. (line 61) * no log timestamp precision: Basic Config Commands. (line 98) * no log trap: Basic Config Commands. (line 18) * no log-adjacency-changes [detail]: OSPF router. (line 74) * no max-metric router-lsa [on-startup|on-shutdown|administrative]: OSPF router. (line 133) * no multicast: Interface Commands. (line 28) * no neighbor A.B.C.D: RIP Configuration. (line 35) * no neighbor PEER default-originate: BGP Peer commands. (line 62) * no neighbor PEER description ...: BGP Peer commands. (line 21) * no neighbor PEER dont-capability-negotiate: Capability Negotiation. (line 52) * no neighbor PEER ebgp-multihop: BGP Peer commands. (line 18) * no neighbor PEER interface IFNAME: BGP Peer commands. (line 34) * no neighbor PEER local-as: BGP Peer commands. (line 84) * no neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 79) * no neighbor PEER next-hop-self [all]: BGP Peer commands. (line 44) * no neighbor PEER override-capability: Capability Negotiation. (line 68) * no neighbor PEER route-reflector-client: Route Reflector. (line 10) * no neighbor PEER shutdown: BGP Peer commands. (line 11) * no neighbor PEER strict-capability-match: Capability Negotiation. (line 41) * no neighbor PEER ttl-security hops NUMBER: BGP Peer commands. (line 103) * no neighbor PEER update-source: BGP Peer commands. (line 51) * no neighbor PEER weight WEIGHT: BGP Peer commands. (line 74) * no network A.B.C.D/M: BGP route. (line 16) * no network A.B.C.D/M area <0-4294967295>: OSPF router. (line 177) * no network A.B.C.D/M area A.B.C.D: OSPF router. (line 176) * no network IFNAME: RIP Configuration. (line 28) * no network NETWORK: RIP Configuration. (line 16) * no ospf abr-type TYPE: OSPF router. (line 27) * no ospf rfc1583compatibility: OSPF router. (line 63) * no ospf router-id: OSPF router. (line 17) * no passive-interface IFNAME: RIP Configuration. (line 58) * no passive-interface INTERFACE: OSPF router. (line 80) * no redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF. (line 22) * no redistribute bgp: How to Announce RIP route. (line 44) * no redistribute connected: How to Announce RIP route. (line 26) * no redistribute kernel: How to Announce RIP route. (line 10) * no redistribute ospf: How to Announce RIP route. (line 36) * no redistribute static: How to Announce RIP route. (line 18) * no route A.B.C.D/M: How to Announce RIP route. (line 54) * no router bgp ASN: BGP router. (line 19) * no router ospf: OSPF router. (line 11) * no router rip: RIP Configuration. (line 12) * no shutdown: Interface Commands. (line 10) * no smux peer OID: MIB and command reference. (line 28) * no smux peer OID PASSWORD: MIB and command reference. (line 31) * no timers basic: RIP Timers. (line 31) * no timers throttle spf <1>: OSPF6 router. (line 18) * no timers throttle spf: OSPF router. (line 92) * no version: RIP Version Control. (line 30) * offset-list ACCESS-LIST (in|out): RIP Metric Manipulation. (line 20) * offset-list ACCESS-LIST (in|out) IFNAME: RIP Metric Manipulation. (line 21) * on-match goto N: Route Map Exit Action Command. (line 11) * on-match next: Route Map Exit Action Command. (line 7) * ospf abr-type TYPE: OSPF router. (line 26) * ospf rfc1583compatibility: OSPF router. (line 62) * ospf router-id A.B.C.D: OSPF router. (line 16) * passive-interface (IFNAME|default): RIP Configuration. (line 57) * passive-interface INTERFACE: OSPF router. (line 79) * password PASSWORD: Basic Config Commands. (line 10) * redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF. (line 7) * redistribute (kernel|connected|static|rip|bgp) metric <0-16777214>: Redistribute routes to OSPF. (line 15) * redistribute (kernel|connected|static|rip|bgp) metric <0-16777214> route-map WORD: Redistribute routes to OSPF. (line 17) * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2): Redistribute routes to OSPF. (line 11) * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214>: Redistribute routes to OSPF. (line 19) * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214> route-map WORD: Redistribute routes to OSPF. (line 21) * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) route-map WORD: Redistribute routes to OSPF. (line 13) * redistribute (kernel|connected|static|rip|bgp) ROUTE-MAP: Redistribute routes to OSPF. (line 9) * redistribute bgp: How to Announce RIP route. (line 41) * redistribute bgp metric <0-16>: How to Announce RIP route. (line 42) * redistribute bgp route-map ROUTE-MAP: How to Announce RIP route. (line 43) * redistribute connected <1>: Redistribute to BGP. (line 13) * redistribute connected <2>: Redistribute routes to OSPF6. (line 8) * redistribute connected: How to Announce RIP route. (line 23) * redistribute connected metric <0-16>: How to Announce RIP route. (line 24) * redistribute connected route-map ROUTE-MAP: How to Announce RIP route. (line 25) * redistribute kernel <1>: Redistribute to BGP. (line 7) * redistribute kernel: How to Announce RIP route. (line 7) * redistribute kernel metric <0-16>: How to Announce RIP route. (line 8) * redistribute kernel route-map ROUTE-MAP: How to Announce RIP route. (line 9) * redistribute ospf <1>: Redistribute to BGP. (line 19) * redistribute ospf: How to Announce RIP route. (line 33) * redistribute ospf metric <0-16>: How to Announce RIP route. (line 34) * redistribute ospf route-map ROUTE-MAP: How to Announce RIP route. (line 35) * redistribute rip: Redistribute to BGP. (line 16) * redistribute ripng: Redistribute routes to OSPF6. (line 9) * redistribute static <1>: Redistribute to BGP. (line 10) * redistribute static <2>: Redistribute routes to OSPF6. (line 7) * redistribute static: How to Announce RIP route. (line 15) * redistribute static metric <0-16>: How to Announce RIP route. (line 16) * redistribute static route-map ROUTE-MAP: How to Announce RIP route. (line 17) * route A.B.C.D/M: How to Announce RIP route. (line 53) * route NETWORK: ripngd Configuration. (line 21) * route-map ROUTE-MAP-NAME (permit|deny) ORDER: Route Map Command. (line 7) * router bgp AS-NUMBER: BGP instance and view. (line 11) * router bgp AS-NUMBER view NAME: BGP instance and view. (line 28) * router bgp ASN: BGP router. (line 13) * router ospf: OSPF router. (line 10) * router ospf6: OSPF6 router. (line 7) * router rip: RIP Configuration. (line 7) * router ripng: ripngd Configuration. (line 9) * router zebra: ripngd Configuration. (line 24) * router-id A.B.C.D: OSPF6 router. (line 9) * service advanced-vty: Basic Config Commands. (line 114) * service integrated-vtysh-config: VTY shell integrated configuration. (line 7) * service password-encryption: Basic Config Commands. (line 111) * service terminal-length <0-512>: Basic Config Commands. (line 117) * set as-path prepend AS-PATH: Using AS Path in Route Map. (line 9) * set as-path prepend AS_PATH: Route Map Set Command. (line 19) * set as-path prepend last-as NUM: Using AS Path in Route Map. (line 12) * set comm-list WORD delete: BGP Community in Route Map. (line 34) * set community COMMUNITY <1>: Route Map Set Command. (line 22) * set community COMMUNITY: BGP Community in Route Map. (line 23) * set community COMMUNITY additive: BGP Community in Route Map. (line 24) * set community none: BGP Community in Route Map. (line 22) * set extcommunity rt EXTCOMMUNITY: BGP Extended Communities in Route Map. (line 9) * set extcommunity soo EXTCOMMUNITY: BGP Extended Communities in Route Map. (line 12) * set ip next-hop A.B.C.D: RIP route-map. (line 53) * set ip next-hop IPV4_ADDRESS: Route Map Set Command. (line 7) * set ipv6 next-hop global IPV6_ADDRESS: Route Map Set Command. (line 25) * set ipv6 next-hop local IPV6_ADDRESS: Route Map Set Command. (line 28) * set local-preference LOCAL_PREF: Route Map Set Command. (line 10) * set metric <0-4294967295>: RIP route-map. (line 58) * set metric METRIC: Route Map Set Command. (line 16) * set src ADDRESS: zebra Route Filtering. (line 17) * set weight WEIGHT: Route Map Set Command. (line 13) * show bgp ipv4 encap summary: BGP Address Family. (line 24) * show bgp ipv4 vpn summary: BGP Address Family. (line 25) * show bgp ipv6 encap summary: BGP Address Family. (line 26) * show bgp ipv6 vpn summary: BGP Address Family. (line 27) * show debug: More Show IP BGP. (line 37) * show debugging ospf: Debugging OSPF. (line 32) * show debugging rip: RIP Debug Commands. (line 29) * show debugging ripng: ripngd Terminal Mode Commands. (line 9) * show interface: zebra Terminal Mode Commands. (line 21) * show ip bgp: Show IP BGP. (line 7) * show ip bgp A.B.C.D: Show IP BGP. (line 8) * show ip bgp community: Display BGP Routes by Community. (line 11) * show ip bgp community COMMUNITY <1>: More Show IP BGP. (line 11) * show ip bgp community COMMUNITY: Display BGP Routes by Community. (line 12) * show ip bgp community COMMUNITY exact-match <1>: More Show IP BGP. (line 12) * show ip bgp community COMMUNITY exact-match: Display BGP Routes by Community. (line 13) * show ip bgp community-list WORD <1>: More Show IP BGP. (line 16) * show ip bgp community-list WORD: Display BGP Routes by Community. (line 20) * show ip bgp community-list WORD exact-match <1>: More Show IP BGP. (line 17) * show ip bgp community-list WORD exact-match: Display BGP Routes by Community. (line 21) * show ip bgp dampened-paths: More Show IP BGP. (line 31) * show ip bgp encap all: BGP Address Family. (line 19) * show ip bgp flap-statistics: More Show IP BGP. (line 34) * show ip bgp neighbor [PEER]: More Show IP BGP. (line 23) * show ip bgp regexp LINE <1>: More Show IP BGP. (line 7) * show ip bgp regexp LINE: Display BGP Routes by AS Path. (line 10) * show ip bgp summary: More Show IP BGP. (line 21) * show ip bgp view NAME: Viewing the view. (line 9) * show ip bgp vpnv4 all: BGP Address Family. (line 15) * show ip bgp X:X::X:X: Show IP BGP. (line 9) * show ip community-list: BGP Community Lists. (line 42) * show ip community-list NAME: BGP Community Lists. (line 43) * show ip extcommunity-list: BGP Extended Community Lists. (line 35) * show ip extcommunity-list NAME: BGP Extended Community Lists. (line 36) * show ip ospf: Showing OSPF information. (line 7) * show ip ospf database: Showing OSPF information. (line 20) * show ip ospf database (asbr-summary|external|network|router|summary): Showing OSPF information. (line 23) * show ip ospf database (asbr-summary|external|network|router|summary) adv-router ADV-ROUTER: Showing OSPF information. (line 30) * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID: Showing OSPF information. (line 25) * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID adv-router ADV-ROUTER: Showing OSPF information. (line 28) * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID self-originate: Showing OSPF information. (line 33) * show ip ospf database (asbr-summary|external|network|router|summary) self-originate: Showing OSPF information. (line 35) * show ip ospf database max-age: Showing OSPF information. (line 37) * show ip ospf database self-originate: Showing OSPF information. (line 39) * show ip ospf interface [INTERFACE]: Showing OSPF information. (line 11) * show ip ospf neighbor: Showing OSPF information. (line 15) * show ip ospf neighbor detail: Showing OSPF information. (line 17) * show ip ospf neighbor INTERFACE: Showing OSPF information. (line 16) * show ip ospf neighbor INTERFACE detail: Showing OSPF information. (line 18) * show ip ospf route: Showing OSPF information. (line 41) * show ip prefix-list: Showing ip prefix-list. (line 7) * show ip prefix-list [NAME]: zebra Terminal Mode Commands. (line 23) * show ip prefix-list detail: Showing ip prefix-list. (line 31) * show ip prefix-list detail NAME: Showing ip prefix-list. (line 33) * show ip prefix-list NAME: Showing ip prefix-list. (line 10) * show ip prefix-list NAME A.B.C.D/M: Showing ip prefix-list. (line 17) * show ip prefix-list NAME A.B.C.D/M first-match: Showing ip prefix-list. (line 25) * show ip prefix-list NAME A.B.C.D/M longer: Showing ip prefix-list. (line 23) * show ip prefix-list NAME seq NUM: Showing ip prefix-list. (line 13) * show ip prefix-list summary: Showing ip prefix-list. (line 27) * show ip prefix-list summary NAME: Showing ip prefix-list. (line 29) * show ip protocol: zebra Terminal Mode Commands. (line 27) * show ip rip: Show RIP Information. (line 9) * show ip rip status: Show RIP Information. (line 17) * show ip ripng: ripngd Terminal Mode Commands. (line 7) * show ip route: zebra Terminal Mode Commands. (line 7) * show ip rpf: Multicast RIB Commands. (line 67) * show ip rpf ADDR: Multicast RIB Commands. (line 54) * show ipforward: zebra Terminal Mode Commands. (line 29) * show ipv6 bgp encap all: BGP Address Family. (line 20) * show ipv6 bgp vpn all: BGP Address Family. (line 16) * show ipv6 ospf6 [INSTANCE_ID]: Showing OSPF6 information. (line 7) * show ipv6 ospf6 database: Showing OSPF6 information. (line 11) * show ipv6 ospf6 interface: Showing OSPF6 information. (line 15) * show ipv6 ospf6 neighbor: Showing OSPF6 information. (line 18) * show ipv6 ospf6 request-list A.B.C.D: Showing OSPF6 information. (line 21) * show ipv6 route: zebra Terminal Mode Commands. (line 19) * show ipv6 route ospf6: Showing OSPF6 information. (line 24) * show ipv6forward: zebra Terminal Mode Commands. (line 34) * show logging: Terminal Mode Commands. (line 30) * show route-map [NAME]: zebra Terminal Mode Commands. (line 25) * show version: Terminal Mode Commands. (line 27) * show zebra fpm stats: zebra Terminal Mode Commands. (line 37) * shutdown: Interface Commands. (line 9) * smux peer OID: MIB and command reference. (line 27) * smux peer OID PASSWORD: MIB and command reference. (line 30) * table TABLENO: Static Route Commands. (line 81) * terminal length <0-512>: Terminal Mode Commands. (line 17) * timers basic UPDATE TIMEOUT GARBAGE: RIP Timers. (line 7) * timers throttle spf DELAY INITIAL-HOLDTIME MAX-HOLDTIME <1>: OSPF6 router. (line 17) * timers throttle spf DELAY INITIAL-HOLDTIME MAX-HOLDTIME: OSPF router. (line 91) * username USERNAME nopassword: VTY shell username. (line 7) * version VERSION: RIP Version Control. (line 20) * who: Terminal Mode Commands. (line 21) * write file: Terminal Mode Commands. (line 10) * write terminal: Terminal Mode Commands. (line 7)  File: quagga.info, Node: VTY Key Index, Next: Index, Prev: Command Index, Up: Top VTY Key Index ************* [index] * Menu: * : CLI Advanced Commands. (line 27) * : CLI Editing Commands. (line 11) * : CLI Advanced Commands. (line 17) * : CLI Movement Commands. (line 15) * : CLI Movement Commands. (line 11) * : CLI Advanced Commands. (line 24) * : CLI Advanced Commands. (line 21) * C-a: CLI Movement Commands. (line 24) * C-b: CLI Movement Commands. (line 15) * C-c: CLI Advanced Commands. (line 10) * C-d: CLI Editing Commands. (line 14) * C-e: CLI Movement Commands. (line 27) * C-f: CLI Movement Commands. (line 11) * C-h: CLI Editing Commands. (line 11) * C-k: CLI Editing Commands. (line 23) * C-n: CLI Advanced Commands. (line 17) * C-p: CLI Advanced Commands. (line 21) * C-t: CLI Editing Commands. (line 29) * C-u: CLI Editing Commands. (line 26) * C-w: CLI Editing Commands. (line 20) * C-z: CLI Advanced Commands. (line 13) * M-b: CLI Movement Commands. (line 21) * M-d: CLI Editing Commands. (line 17) * M-f: CLI Movement Commands. (line 18)  File: quagga.info, Node: Index, Prev: VTY Key Index, Up: Top Index ***** [index] * Menu: * About Quagga: About Quagga. (line 6) * Bug hunting: Bug Reports. (line 6) * Bug Reports: Bug Reports. (line 6) * Build options: The Configure script and its options. (line 6) * Building on Linux boxes: Linux notes. (line 6) * Building the system: Installation. (line 6) * Compatibility with other systems: Supported Platforms. (line 6) * Configuration files for running the software: Config Commands. (line 6) * Configuration options: The Configure script and its options. (line 6) * Configuring Quagga: Linux notes. (line 6) * Contact information: Mailing List. (line 6) * Distance-vector routing protocol: OSPF Fundamentals. (line 6) * Distribution configuration: The Configure script and its options. (line 6) * Errors in the software: Bug Reports. (line 6) * Files for running configurations: Config Commands. (line 6) * Found a bug?: Bug Reports. (line 6) * Getting the herd running: Config Commands. (line 6) * How to get in touch with Quagga: Mailing List. (line 6) * How to install Quagga: Installation. (line 6) * Installation: Installation. (line 6) * Installing Quagga: Installation. (line 6) * Link State Advertisement: OSPF Fundamentals. (line 12) * Link State Announcement: OSPF Fundamentals. (line 12) * Link State DataBase: OSPF Fundamentals. (line 12) * Link-state routing protocol: OSPF Fundamentals. (line 6) * Link-state routing protocol advantages: OSPF Fundamentals. (line 22) * Link-state routing protocol disadvantages: OSPF Fundamentals. (line 32) * Linux configurations: Linux notes. (line 6) * LSA flooding: OSPF Fundamentals. (line 12) * Mailing lists: Mailing List. (line 6) * Mailing Quagga: Mailing List. (line 6) * Making Quagga: Installation. (line 6) * Modifying the herd's behavior: Config Commands. (line 6) * Operating systems that support Quagga: Supported Platforms. (line 6) * Options for configuring: The Configure script and its options. (line 6) * Options to ./configure: The Configure script and its options. (line 6) * OSPF Areas overview: OSPF Fundamentals. (line 106) * OSPF Fundamentals: OSPFv2. (line 25) * OSPF Hello Protocol: OSPF Fundamentals. (line 54) * OSPF Hello Protocol overview: OSPF Fundamentals. (line 53) * OSPF LSA overview: OSPF Fundamentals. (line 75) * OSPFv2: ripngd Filtering Commands. (line 14) * Overview: Overview. (line 6) * Quagga Least-Privileges: Least-Privilege support. (line 6) * Quagga on other systems: Supported Platforms. (line 6) * Quagga Privileges: Least-Privilege support. (line 6) * Reporting bugs: Bug Reports. (line 6) * Reporting software errors: Bug Reports. (line 6) * Software architecture: System Architecture. (line 6) * Software internals: System Architecture. (line 6) * Supported platforms: Supported Platforms. (line 6) * System architecture: System Architecture. (line 6)