# 2008 October 6
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the LIMIT ... OFFSET ... clause
#  of UPDATE and DELETE statements.
#
# $Id: wherelimit.test,v 1.1.1.1 2012/02/21 17:04:16 misho Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

proc create_test_data {size} {
  # Build some test data
  #
  execsql {
    DROP TABLE IF EXISTS t1;
    CREATE TABLE t1(x int, y int);
    BEGIN;
  }
  for {set i 1} {$i<=$size} {incr i} {
    for {set j 1} {$j<=$size} {incr j} {
      execsql "INSERT INTO t1 VALUES([expr {$i}],[expr {$j}])"
    }
  }
  execsql {
    COMMIT;
  }
  return {}
}

ifcapable {update_delete_limit} {

  # check syntax error support
  do_test wherelimit-0.1 {
    catchsql {DELETE FROM t1 ORDER BY x}
  } {1 {ORDER BY without LIMIT on DELETE}}
  do_test wherelimit-0.2 {
    catchsql {DELETE FROM t1 WHERE x=1 ORDER BY x}
  } {1 {ORDER BY without LIMIT on DELETE}}
  do_test wherelimit-0.3 {
    catchsql {UPDATE t1 SET y=1 WHERE x=1 ORDER BY x}
  } {1 {ORDER BY without LIMIT on UPDATE}}

  # no AS on table sources
  do_test wherelimit-0.4 {
    catchsql {DELETE FROM t1 AS a WHERE x=1}
  } {1 {near "AS": syntax error}}
  do_test wherelimit-0.5 {
    catchsql {UPDATE t1 AS a SET y=1 WHERE x=1}
  } {1 {near "AS": syntax error}}

  # OFFSET w/o LIMIT
  do_test wherelimit-0.6 {
    catchsql {DELETE FROM t1 WHERE x=1 OFFSET 2}
  } {1 {near "OFFSET": syntax error}}
  do_test wherelimit-0.7 {
    catchsql {UPDATE t1 SET y=1 WHERE x=1 OFFSET 2}
  } {1 {near "OFFSET": syntax error}}


  # check deletes w/o where clauses but with limit/offsets
  create_test_data 5
  do_test wherelimit-1.0 {
    execsql {SELECT count(*) FROM t1}
  } {25}
  do_test wherelimit-1.1 {
    execsql {DELETE FROM t1}
    execsql {SELECT count(*) FROM t1}
  } {0}
  create_test_data 5
  do_test wherelimit-1.2 {
    execsql {DELETE FROM t1 LIMIT 5}
    execsql {SELECT count(*) FROM t1}
  } {20}
  do_test wherelimit-1.3 {
    # limit 5
    execsql {DELETE FROM t1 ORDER BY x LIMIT 5}
    execsql {SELECT count(*) FROM t1}
  } {15}
  do_test wherelimit-1.4 {
    # limit 5, offset 2
    execsql {DELETE FROM t1 ORDER BY x LIMIT 5 OFFSET 2}
    execsql {SELECT count(*) FROM t1}
  } {10}
  do_test wherelimit-1.5 {
    # limit 5, offset -2
    execsql {DELETE FROM t1 ORDER BY x LIMIT 5 OFFSET -2}
    execsql {SELECT count(*) FROM t1}
  } {5}
  do_test wherelimit-1.6 {
    # limit -5 (no limit), offset 2
    execsql {DELETE FROM t1 ORDER BY x LIMIT 2, -5}
    execsql {SELECT count(*) FROM t1}
  } {2}
  do_test wherelimit-1.7 {
    # limit 5, offset -2 (no offset)
    execsql {DELETE FROM t1 ORDER BY x LIMIT -2, 5}
    execsql {SELECT count(*) FROM t1}
  } {0}
  create_test_data 5
  do_test wherelimit-1.8 {
    # limit -5 (no limit), offset -2 (no offset)
    execsql {DELETE FROM t1 ORDER BY x LIMIT -2, -5}
    execsql {SELECT count(*) FROM t1}
  } {0}
  create_test_data 3
  do_test wherelimit-1.9 {
    # limit 5, offset 2
    execsql {DELETE FROM t1 ORDER BY x LIMIT 2, 5}
    execsql {SELECT count(*) FROM t1}
  } {4}
  do_test wherelimit-1.10 {
    # limit 5, offset 5
    execsql {DELETE FROM t1 ORDER BY x LIMIT 5 OFFSET 5}
    execsql {SELECT count(*) FROM t1}
  } {4}
  do_test wherelimit-1.11 {
    # limit 50, offset 30
    execsql {DELETE FROM t1 ORDER BY x LIMIT 50 OFFSET 30}
    execsql {SELECT count(*) FROM t1}
  } {4}
  do_test wherelimit-1.12 {
    # limit 50, offset 30
    execsql {DELETE FROM t1 ORDER BY x LIMIT 30, 50}
    execsql {SELECT count(*) FROM t1}
  } {4}
  do_test wherelimit-1.13 {
    execsql {DELETE FROM t1 ORDER BY x LIMIT 50 OFFSET 50}
    execsql {SELECT count(*) FROM t1}
  } {4}


  create_test_data 6
  do_test wherelimit-2.0 {
    execsql {SELECT count(*) FROM t1}
  } {36}
  do_test wherelimit-2.1 {
    execsql {DELETE FROM t1 WHERE x=1}
    execsql {SELECT count(*) FROM t1}
  } {30}
  create_test_data 6
  do_test wherelimit-2.2 {
    execsql {DELETE FROM t1 WHERE x=1 LIMIT 5}
    execsql {SELECT count(*) FROM t1}
  } {31}
  do_test wherelimit-2.3 {
    # limit 5
    execsql {DELETE FROM t1 WHERE x=1 ORDER BY x LIMIT 5}
    execsql {SELECT count(*) FROM t1}
  } {30}
  do_test wherelimit-2.4 {
    # limit 5, offset 2
    execsql {DELETE FROM t1 WHERE x=2 ORDER BY x LIMIT 5 OFFSET 2}
    execsql {SELECT count(*) FROM t1}
  } {26}
  do_test wherelimit-2.5 {
    # limit 5, offset -2
    execsql {DELETE FROM t1 WHERE x=2 ORDER BY x LIMIT 5 OFFSET -2}
    execsql {SELECT count(*) FROM t1}
  } {24}
  do_test wherelimit-2.6 {
    # limit -5 (no limit), offset 2
    execsql {DELETE FROM t1 WHERE x=3 ORDER BY x LIMIT 2, -5}
    execsql {SELECT count(*) FROM t1}
  } {20}
  do_test wherelimit-2.7 {
    # limit 5, offset -2 (no offset)
    execsql {DELETE FROM t1 WHERE x=3 ORDER BY x LIMIT -2, 5}
    execsql {SELECT count(*) FROM t1}
  } {18}
  do_test wherelimit-2.8 {
    # limit -5 (no limit), offset -2 (no offset)
    execsql {DELETE FROM t1 WHERE x=4 ORDER BY x LIMIT -2, -5}
    execsql {SELECT count(*) FROM t1}
  } {12}
  create_test_data 6
  do_test wherelimit-2.9 {
    # limit 5, offset 2
    execsql {DELETE FROM t1 WHERE x=5 ORDER BY x LIMIT 2, 5}
    execsql {SELECT count(*) FROM t1}
  } {32}
  do_test wherelimit-2.10 {
    # limit 5, offset 5
    execsql {DELETE FROM t1 WHERE x=6 ORDER BY x LIMIT 5 OFFSET 5}
    execsql {SELECT count(*) FROM t1}
  } {31}
  do_test wherelimit-2.11 {
    # limit 50, offset 30
    execsql {DELETE FROM t1 WHERE x=1 ORDER BY x LIMIT 50 OFFSET 30}
    execsql {SELECT count(*) FROM t1}
  } {31}
  do_test wherelimit-2.12 {
    # limit 50, offset 30
    execsql {DELETE FROM t1 WHERE x=2 ORDER BY x LIMIT 30, 50}
    execsql {SELECT count(*) FROM t1}
  } {31}
  do_test wherelimit-2.13 {
    execsql {DELETE FROM t1 WHERE x=3 ORDER BY x LIMIT 50 OFFSET 50}
    execsql {SELECT count(*) FROM t1}
  } {31}


  create_test_data 6
  do_test wherelimit-3.0 {
    execsql {SELECT count(*) FROM t1}
  } {36}
  do_test wherelimit-3.1 {
    execsql {UPDATE t1 SET y=1 WHERE x=1}
    execsql {SELECT count(*) FROM t1 WHERE y=1}
  } {11}
  create_test_data 6
  do_test wherelimit-3.2 {
    execsql {UPDATE t1 SET y=1 WHERE x=1 LIMIT 5}
    execsql {SELECT count(*) FROM t1 WHERE y=1}
  } {10}
  do_test wherelimit-3.3 {
    # limit 5
    execsql {UPDATE t1 SET y=2 WHERE x=2 ORDER BY x LIMIT 5}
    execsql {SELECT count(*) FROM t1 WHERE y=2}
  } {9}
  create_test_data 6
  do_test wherelimit-3.4 {
    # limit 5, offset 2
    execsql {UPDATE t1 SET y=2 WHERE x=2 ORDER BY x LIMIT 5 OFFSET 2}
    execsql {SELECT count(*) FROM t1 WHERE y=1}
  } {6}
  do_test wherelimit-3.5 {
    # limit 5, offset -2
    execsql {UPDATE t1 SET y=2 WHERE x=2 ORDER BY x LIMIT 5 OFFSET -2}
    execsql {SELECT count(*) FROM t1 WHERE y=1}
  } {5}
  do_test wherelimit-3.6 {
    # limit -5 (no limit), offset 2
    execsql {UPDATE t1 SET y=3 WHERE x=3 ORDER BY x LIMIT 2, -5}
    execsql {SELECT count(*) FROM t1 WHERE y=3}
  } {8}
  do_test wherelimit-3.7 {
    # limit 5, offset -2 (no offset)
    execsql {UPDATE t1 SET y=3 WHERE x=3 ORDER BY x LIMIT -2, 5}
    execsql {SELECT count(*) FROM t1 WHERE y=3}
  } {10}

  do_test wherelimit-3.8 {
    # limit -5 (no limit), offset -2 (no offset)
    execsql {UPDATE t1 SET y=4 WHERE x=4 ORDER BY x LIMIT -2, -5}
    execsql {SELECT count(*) FROM t1 WHERE y=4}
  } {9}
  create_test_data 6
  do_test wherelimit-3.9 {
    # limit 5, offset 2
    execsql {UPDATE t1 SET y=4 WHERE x=5 ORDER BY x LIMIT 2, 5}
    execsql {SELECT count(*) FROM t1 WHERE y=4}
  } {9}
  do_test wherelimit-3.10 {
    # limit 5, offset 5
    execsql {UPDATE t1 SET y=4 WHERE x=6 ORDER BY x LIMIT 5 OFFSET 5}
    execsql {SELECT count(*) FROM t1 WHERE y=1}
  } {6}
  do_test wherelimit-3.11 {
    # limit 50, offset 30
    execsql {UPDATE t1 SET y=1 WHERE x=1 ORDER BY x LIMIT 50 OFFSET 30}
    execsql {SELECT count(*) FROM t1 WHERE y=1}
  } {6}
  do_test wherelimit-3.12 {
    # limit 50, offset 30
    execsql {UPDATE t1 SET y=1 WHERE x=2 ORDER BY x LIMIT 30, 50}
    execsql {SELECT count(*) FROM t1 WHERE y=1}
  } {6}
  do_test wherelimit-3.13 {
    execsql {UPDATE t1 SET y=1 WHERE x=3 ORDER BY x LIMIT 50 OFFSET 50}
    execsql {SELECT count(*) FROM t1 WHERE y=1}
  } {6}

}

finish_test