#!/bin/sh
# Copyright 2012 Quest Software, Inc. ALL RIGHTS RESERVED
pp_revision="371"
# Copyright 2012 Quest Software, Inc. ALL RIGHTS RESERVED.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. Neither the name of Quest Software, Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Please see for more information
pp_version="1.0.0.$pp_revision"
pp_copyright="Copyright 2012, Quest Software, Inc. ALL RIGHTS RESERVED."
pp_opt_debug=false
pp_opt_destdir="$DESTDIR"
pp_opt_install_script=
pp_opt_list=false
pp_opt_no_clean=false
pp_opt_no_package=false
pp_opt_only_front=false
pp_opt_platform=
pp_opt_probe=false
pp_opt_strip=false
pp_opt_save_unstripped=false
pp_opt_vas_platforms=false
pp_opt_wrkdir="`pwd`/pp.work.$$"
pp_opt_verbose=false
pp_opt_version=false
pp_opt_input="-"
pp_opt_init_vars=""
pp_opt_eval=
test -n "$PP_NO_CLEAN" && pp_opt_no_clean=true
test -n "$PP_DEBUG" && pp_opt_debug=true
test -n "$PP_VERBOSE" && pp_opt_verbose=true
pp_main_cleanup () {
pp_debug "main_cleanup"
pp_remove_later_now
if $pp_opt_no_clean || test x"$pp_platform" = x"unknown"; then
: no cleanup
else
pp_backend_${pp_platform}_cleanup
$pp_errors && pp_die "Errors during cleanup"
if test -d "$pp_wrkdir"; then
if $pp_opt_debug; then
pp_debug "not removing $pp_wrkdir"
else
pp_verbose rm -rf "$pp_wrkdir"
fi
fi
fi
}
pp_parseopts () {
typeset a n _var _val
while test $# -gt 0; do
# convert -[dilpv] to --long-options
case "$1" in
--?*=?*) n=`echo "$1" | sed -ne 's/^--\([^=]*\)=.*/\1/p'`
a=`echo "$1" | sed -ne 's/^--[^=]*=\(.*\)/\1/p'`
shift
set -- "--$n" "$a" "$@";;
--?*) : ;;
-d) shift; set -- "--debug" "$@";;
-d*) a=`echo "$1" | sed -ne 's/^-.//'`
shift; set -- "--debug" "$@";;
-i) shift; set -- "--install-script" "$@";;
-i*) a=`echo "$1" | sed -ne 's/^-.//'`
shift; set -- "--install-script" "$a" "$@";;
-l) shift; set -- "--list" "$@";;
-l*) a=`echo "$1" | sed -ne 's/^-.//'`
shift; set -- "--list" "$@";;
-p) shift; set -- "--platform" "$@";;
-p*) a=`echo "$1" | sed -ne 's/^-.//'`
shift; set -- "--platform" "$a" "$@";;
-v) shift; set -- "--verbose" "$@";;
-v*) a=`echo "$1" | sed -ne 's/^-.//'`
shift; set -- "--verbose" "$@";;
-\?) shift; set -- "--help" "$@";;
-\?*) a=`echo "$1" | sed -ne 's/^-.//'`
shift; set -- "--help" "$@";;
esac
case "$1" in
--destdir|--eval|--install-script|--platform|--wrkdir)
test $# -ge 2 || pp_error "missing argument to $1";;
esac
case "$1" in
--) shift;break;;
--debug) pp_opt_debug=true; shift;;
--destdir) pp_opt_destdir="$2"; shift;shift;;
--eval) pp_opt_eval="$2"; shift;shift;; # undoc
--install-script) pp_opt_install_script="$2"; shift;shift;;
--list) pp_opt_list=true; shift;;
--no-clean) pp_opt_no_clean=true; shift;;
--no-package) pp_opt_no_package=true; shift;;
--only-front) pp_opt_only_front=true; shift;;
--platform) pp_opt_platform="$2"; shift;shift;;
--probe) pp_opt_probe=true; shift;;
--strip) pp_opt_strip=true; shift;;
--save-unstripped) pp_opt_save_unstripped=true; shift;;
--wrkdir) pp_opt_wrkdir="$2"; shift;shift;;
--vas-platforms) pp_opt_vas_platforms=true; shift;;
--verbose) pp_opt_verbose=true; shift;;
--version) pp_opt_version=true; shift;;
--help) pp_errors=true; shift;;
-) break;;
-*) pp_error "unknown option $1"; shift;;
*) break;;
esac
done
pp_opt_input=-
if test $# -gt 0; then
pp_opt_input="$1"
shift
fi
#-- extra arguments of the form Foo=bar alter *global* vars
while test $# -gt 0; do
case "$1" in
-*) pp_error "unexpected option '$1'"
shift;;
*=*) _val="${1#*=}"
_var=${1%="$_val"}
_val=`echo "$_val"|sed -e 's/[$"\\]/\\&/g'`
pp_debug "setting $_var = \"$_val\""
pp_opt_init_vars="$pp_opt_init_vars$_var=\"$_val\";"
shift;;
*) pp_error "unexpected argument $1'"
shift;;
esac
done
test $# -gt 0 &&
pp_error "unknown argument $1"
if $pp_errors; then
cat <<. >&2
polypkg $pp_version $pp_copyright
usage: $0 [options] [input.pp] [var=value ...]
-d --debug -- write copious info to stderr
--destdir=path -- file root, defaults to \$DESTDIR
-? --help -- display this information
-i --install-script=path -- create an install helper script
-l --list -- write package filenames to stdout
--no-clean -- don't remove temporary files
--no-package -- do everything but create packages
--only-front -- only perform front-end actions
-p --platform=platform -- defaults to local platform
--probe -- print local system identifier, then exit
--strip -- strip debug symbols from binaries before
packaging (modifies files in destdir)
--save-unstripped -- save unstripped binaries to
\$name-\$version-unstripped.tar.gz
--wrkdir=path -- defaults to subdirectory of \$TMPDIR or /tmp
-v --verbose -- write info to stderr
--version -- display version and quit
.
exit 1
fi
}
pp_drive () {
# initialise the front and back ends
pp_model_init
pp_frontend_init
$pp_opt_only_front || pp_backend_init
# run the front-end to generate the intermediate files
# set $pp_input_dir to be the 'include dir' if needed
pp_debug "calling frontend on $pp_opt_input"
case "$pp_opt_input" in
-) pp_input_dir=.
test -t 1<&0 &&
pp_warn "reading directives from standard input"
pp_frontend
;;
*/*) pp_input_dir=${pp_opt_input%/*}
pp_frontend <"$pp_opt_input"
;;
*) pp_input_dir=.
pp_frontend <"$pp_opt_input"
;;
esac
pp_files_ignore_others
pp_service_scan_groups
# some sanity checks after front-end processing
if test x"$pp_platform" != x"null"; then
pp_debug "sanity checks"
test -n "$pp_components" || pp_error "No components?"
pp_check_var_is_defined "name"
pp_check_var_is_defined "version"
pp_files_check_duplicates
pp_files_check_coverage
pp_die_if_errors "Errors during sanity checks"
fi
# stop now if we're only running the front
$pp_opt_only_front && return
if test x"$pp_opt_strip" = x"true"; then
pp_strip_binaries
fi
# run the back-end to generate the package
pp_debug "calling backend"
pp_backend
pp_die_if_errors "Errors during backend processing"
# copy the resulting package files to PP_PKGDESTDIR or .
for f in `pp_backend_names` -; do
test x"$f" = x"-" && continue
pp_debug "copying: $f to `pwd`"
if pp_verbose cp -r $pp_wrkdir/$f ${PP_PKGDESTDIR:-.}; then
echo "${PP_PKGDESTDIR:+$PP_PKGDESTDIR/}$f"
else
pp_error "$f: missing package"
fi
done
pp_die_if_errors "Errors during package copying"
}
pp_install_script () {
pp_debug "writing install script to $pp_opt_install_script"
rm -f $pp_opt_install_script
pp_backend_install_script > $pp_opt_install_script
pp_die_if_errors "Errors during package install script"
chmod +x $pp_opt_install_script
}
pp_main () {
# If PP_DEV_PATH is set, then jump to that script.
# (Useful when working on polypkg source that isn't installed)
if test -n "$PP_DEV_PATH" -a x"$PP_DEV_PATH" != x"$0"; then
pp_warn "switching from $0 to $PP_DEV_PATH ..."
exec "$PP_DEV_PATH" "$@" || exit 1
fi
pp_set_expand_converter_or_reexec "$@"
pp_parseopts "$@"
if $pp_opt_version; then
#-- print version and exit
echo "polypkg $pp_version"
exit 0
fi
pp_set_platform
trap 'pp_main_cleanup' 0
pp_wrkdir="$pp_opt_wrkdir"
pp_debug "pp_wrkdir = $pp_wrkdir"
rm -rf "$pp_wrkdir"
mkdir -p "$pp_wrkdir"
pp_destdir="$pp_opt_destdir"
pp_debug "pp_destdir = $pp_destdir"
if $pp_opt_probe; then
pp_backend_init
pp_backend_probe
elif $pp_opt_vas_platforms; then
pp_backend_init
pp_backend_vas_platforms
elif test -n "$pp_opt_eval"; then
#-- execute a shell command
eval "$pp_opt_eval" || exit
else
pp_drive
if test -n "$pp_opt_install_script"; then
pp_install_script
fi
fi
exit 0
}
pp_errors=false
if test -n "$TERM" -a -t 1 && (tput op) >/dev/null 2>/dev/null; then
pp_col_redfg=`tput setf 4` 2>/dev/null
pp_col_bluefg=`tput setf 1` 2>/dev/null
pp_col_reset=`tput op` 2>/dev/null
else
pp_col_redfg='['
pp_col_bluefg='['
pp_col_reset=']'
fi
pp__warn () {
if test x"" = x"$pp_lineno"; then
echo "$1 $2" >&2
else
echo "$1 line $pp_lineno: $2" >&2
fi
}
pp_warn () {
pp__warn "pp: ${pp_col_redfg}warning${pp_col_reset}" "$*"
}
pp_error () {
pp__warn "pp: ${pp_col_redfg}error${pp_col_reset}" "$*"
pp_errors=true
}
pp_die () {
pp_error "$@"
exit 1
}
pp_die_if_errors () {
$pp_errors && pp_die "$@"
}
pp_debug () {
$pp_opt_debug && echo "${pp_col_bluefg}debug${pp_col_reset} $*" >&2
}
pp_verbose () {
$pp_opt_verbose && echo "pp: ${pp_col_bluefg}info${pp_col_reset} $*" >&2
"$@";
}
pp_substitute () {
sed -e 's,%(\([^)]*\)),`\1`,g' \
-e 's,%{\([^}]*\)},${\1},g' \
-e 's,$,,' |
tr '' '\012' |
sed -e '/^[^]/s/["$`\\]/\\&/g' \
-e 's/^//' \
-e '1s/^/echo "/' \
-e '$s,$,",' \
-e 's,,"echo ",g' |
tr -d '\012' |
tr '' '\012'
echo
}
pp_incr () {
eval "$1=\`expr \$$1 + 1\`"
}
pp_decr () {
eval "$1=\`expr \$$1 - 1\`"
}
pp_check_var_is_defined () {
if eval test -z "\"\$$1\""; then
pp_error "\$$1: not set"
eval "$1=undefined"
fi
}
pp_contains () {
case " $1 " in
*" $2 "*) return 0;;
*) return 1;;
esac
}
pp_contains_all () {
typeset _s _c
_l="$1"; shift
for _w
do
pp_contains "$_l" "$_w" || return 1
done
return 0
}
pp_contains_any () {
typeset _s _c
_l="$1"; shift
for _w
do
pp_contains "$_l" "$_w" && return 0
done
return 1
}
pp_add_to_list () {
if eval test -z \"\$$1\"; then
eval $1='"$2"'
elif eval pp_contains '"$'$1'"' '"$2"'; then
: already there
else
eval $1='"$'$1' $2"'
fi
}
pp_unique () {
typeset result element
result=
for element
do
pp_add_to_list result $element
done
echo $result
}
pp_mode_strip_altaccess () {
case "$1" in
??????????[+.])
echo `echo "$1" | cut -b -10`;;
*)
echo "$1";;
esac
}
pp_mode_from_ls () {
typeset umode gmode omode smode
set -- `pp_mode_strip_altaccess "$1"`
case "$1" in
?--[-X]??????) umode=0;;
?--[xs]??????) umode=1;;
?-w[-X]??????) umode=2;;
?-w[xs]??????) umode=3;;
?r-[-X]??????) umode=4;;
?r-[xs]??????) umode=5;;
?rw[-X]??????) umode=6;;
?rw[xs]??????) umode=7;;
*) pp_error "bad user mode $1";;
esac
case "$1" in
????--[-S]???) gmode=0;;
????--[xs]???) gmode=1;;
????-w[-S]???) gmode=2;;
????-w[xs]???) gmode=3;;
????r-[-X]???) gmode=4;;
????r-[xs]???) gmode=5;;
????rw[-X]???) gmode=6;;
????rw[xs]???) gmode=7;;
*) pp_error "bad group mode $1";;
esac
case "$1" in
???????--[-T]) omode=0;;
???????--[xt]) omode=1;;
???????-w[-T]) omode=2;;
???????-w[xt]) omode=3;;
???????r-[-T]) omode=4;;
???????r-[xt]) omode=5;;
???????rw[-T]) omode=6;;
???????rw[xt]) omode=7;;
*) pp_error "bad other mode $1";;
esac
case "$1" in
???[-x]??[-x]??[-x]) smode=;;
???[-x]??[-x]??[tT]) smode=1;;
???[-x]??[Ss]??[-x]) smode=2;;
???[-x]??[Ss]??[tT]) smode=3;;
???[Ss]??[-x]??[-x]) smode=4;;
???[Ss]??[-x]??[tT]) smode=5;;
???[Ss]??[Ss]??[-x]) smode=6;;
???[Ss]??[Ss]??[tT]) smode=7;;
*) pp_error "bad set-id mode $1";;
esac
echo "$smode$umode$gmode$omode"
}
pp_find_recurse () {
pp_debug "find: ${1#$pp_destdir}/"
for f in "$1"/.* "$1"/*; do
case "$f" in */.|*/..) continue;; esac # should never happen!
if test -d "$f" -o -f "$f" -o -h "$f"; then
if test -d "$f" -a ! -h "$f"; then
echo "${f#$pp_destdir}/"
pp_find_recurse "$f"
else
echo "${f#$pp_destdir}"
fi
fi
done
}
pp_prepend () {
#test -t && pp_warn "pp_prepend: stdin is a tty?"
if test -f $1; then
pp_debug "prepending to $1"
mv $1 $1._prepend
cat - $1._prepend >$1
rm -f $1._prepend
else
pp_debug "prepend: creating $1"
cat >$1
fi
}
pp_note_file_used() {
echo "$1" >> $pp_wrkdir/all.files
}
pp_create_dir_if_missing () {
case "$1" in
*/) pp_error "pp_create_dir_if_missing: trailing / forbidden";;
"") return 0;;
*) if test ! -d "$pp_destdir$1"; then
pp_debug "fabricating directory $1/"
pp_create_dir_if_missing "${1%/*}"
mkdir "$pp_destdir$1" &&
pp_note_file_used "$1/"
pp_remove_later "$1" &&
chmod ${2:-755} "$pp_destdir$1"
fi;;
esac
}
pp_add_file_if_missing () {
typeset dir
#-- check that the file isn't already declared in the component
if test -s $pp_wrkdir/%files.${2:-run}; then
awk "\$6 == \"$1\" {exit 1}" < $pp_wrkdir/%files.${2:-run} || return 1
fi
pp_create_dir_if_missing "${1%/*}"
pp_debug "fabricating file $1"
echo "f ${3:-755} - - ${4:--} $1" >> $pp_wrkdir/%files.${2:-run}
pp_note_file_used "$1"
pp_remove_later "$1"
return 0
}
pp_add_transient_file () {
test -f "$pp_destdir$1" && pp_die "$pp_destdir$1: exists"
pp_create_dir_if_missing "${1%/*}"
pp_debug "transient file $1"
pp_note_file_used "$1"
pp_remove_later "$1"
}
pp_remove_later () {
{
echo "$1"
test -s $pp_wrkdir/pp_cleanup && cat $pp_wrkdir/pp_cleanup
} > $pp_wrkdir/pp_cleanup.new
mv $pp_wrkdir/pp_cleanup.new $pp_wrkdir/pp_cleanup
}
pp_ls_readlink () {
if test -h "$1"; then
ls -1ld "$1" | sed -ne 's,.* -> ,,p'
else
echo "$1: not a symbolic link" >&2
return 1
fi
}
pp_remove_later_now () {
typeset f
if test -s $pp_wrkdir/pp_cleanup; then
pp_debug "pp_remove_later_now"
while read f; do
pp_debug "removing $pp_destdir$f"
if test -d $pp_destdir$f; then
rmdir $pp_destdir$f
else
rm $pp_destdir$f
fi
done < $pp_wrkdir/pp_cleanup
rm $pp_wrkdir/pp_cleanup
fi
}
pp_readlink() {
pp_debug "&& pp_readlink_fn=$pp_readlink_fn"
if test -n "$pp_readlink_fn"; then
pp_debug "&& calling $pp_readlink_fn $*"
"$pp_readlink_fn" "$@"
else
readlink "$@"
fi
}
pp_install_script_common () {
cat <<-.
# Automatically generated for
# $name $version ($pp_platform)
# by PolyPackage $pp_version
usage () {
case "$1" in
"list-services")
echo "usage: \$0 list-services" ;;
"list-components")
echo "usage: \$0 list-components" ;;
"list-files")
echo "usage: \$0 list-files {cpt...|all}" ;;
"install")
echo "usage: \$0 install {cpt...|all}" ;;
"uninstall")
echo "usage: \$0 uninstall {cpt...|all}" ;;
"start")
echo "usage: \$0 start {svc...}" ;;
"stop")
echo "usage: \$0 stop {svc...}" ;;
"print-platform")
echo "usage: \$0 print-platform" ;;
*)
echo "usage: \$0 [-q] command [args]"
echo " list-services"
echo " list-components"
echo " list-files {cpt...|all}"
echo " install {cpt...|all}"
echo " uninstall {cpt...|all}"
echo " start {svc...}"
echo " stop {svc...}"
echo " print-platform"
;;
esac >&2
exit 1
}
if test x"\$1" = x"-q"; then
shift
verbose () { "\$@"; }
verbosemsg () { : ; }
else
verbose () { echo "+ \$*"; "\$@"; }
verbosemsg () { echo "\$*"; }
fi
.
}
pp_functions () {
typeset func deps allfuncs
allfuncs=
while test $# -gt 0; do
pp_add_to_list allfuncs "$1"
deps=`pp_backend_function "$1:depends"`
shift
set -- `pp_unique "$@" $deps`
done
for func in $allfuncs
do
pp_debug "generating function code for '$1'"
echo ""
echo "$func () {"
case "$func" in
pp_mkgroup|pp_mkuser|pp_havelib) echo <<.;;
if test \$# -lt 1; then
echo "$func: not enough arguments" >&2
return 1
fi
.
esac
pp_backend_function "$func" || cat <<.
echo "$func: not implemented" >&2
return 1
.
echo "}"
done
}
pp_function () {
pp_functions "$1"
}
pp_makevar () {
#-- convert all non alpha/digits to underscores
echo "$*" | tr -c '[a-z][A-Z][0-9]\012' '[_*]'
}
pp_getpwuid () {
awk -F: '$3 == uid { if (!found) print $1; found=1; } END { if (!found) exit 1; }' uid="$1" \
< /etc/passwd || pp_error "no local username for uid $1"
}
pp_getgrgid () {
awk -F: '$3 == gid { if (!found) print $1; found=1; } END { if (!found) exit 1; }' gid="$1" \
< /etc/group || pp_error "no local group for gid $1"
}
pp_backend_function_getopt () {
cat <<'..'
pp_getopt () {
_pp_optstring="$1"; shift; eval `_pp_getopt "$_pp_optstring"`
}
_pp_getopt_meta=s,[\\\\\"\'\`\$\&\;\(\)\{\}\#\%\ \ ],\\\\\&,g
_pp_protect () {
sed "$_pp_getopt_meta" <<. | tr '\012' ' '
$*
.
}
_pp_protect2 () {
sed "s,^..,,$pp_getopt_meta" <<. | tr '\012' ' '
$*
.
}
_pp_nonl () {
tr '\012' ' ' <<.
$*
.
}
_pp_getopt () {
_pp_nonl '_pp_nonl set --; while test $# -gt 0; do case "$1" in "--") shift; break;;'
sed 's/\([^: ]:*\)/<@<\1>@>/g;
s/<@<\(.\):>@>/"-\1") _pp_nonl -"\1"; _pp_protect "$2"; shift; shift;; "-\1"*) _pp_nonl -"\1"; _pp_protect2 "$1"; shift;;/g;s/<@<\(.\)>@>/ "-\1") _pp_nonl -"\1"; shift;; "-\1"*) _pp_nonl -"\1"; _pp_tmp="$1"; shift; set -- -`_pp_protect2 "$_pp_tmp"` "$@";;/g' <<.
$1
.
_pp_nonl '-*) echo "$1: unknown option">&2; return 1;; *) break;; esac; done; _pp_nonl --; while test $# -gt 0; do _pp_nonl "$1"; shift; done; echo'
echo
}
..
}
pp_copy_unstripped () {
typeset filedir realdir
filedir="`dirname ${1#$pp_destdir}`"
realdir="$pp_wrkdir/unstripped/$filedir"
mkdir -p "$realdir"
# Can't use hardlinks because `strip` modifies the original file in-place
cp "$1" "$realdir"
}
pp_package_stripped_binaries () {
(cd "$pp_wrkdir/unstripped" && tar -c .) \
| gzip > "$name-dbg-$version.tar.gz"
rm -rf "$pp_wrkdir/unstripped"
}
pp_strip_binaries () {
if test x"$pp_opt_save_unstripped" = x"true"; then
rm -rf "$pp_wrkdir/unstripped"
mkdir "$pp_wrkdir/unstripped"
fi
for f in `find "$pp_destdir" -type f`; do
if file "$f" | awk '{print $2}' | grep ^ELF >/dev/null 2>&1; then
if test x"$pp_opt_save_unstripped" = x"true"; then
if file "$f" | LC_MESSAGES=C grep 'not stripped' >/dev/null 2>&1; then
pp_debug "Saving unstripped binary $f"
pp_copy_unstripped "$f"
else
pp_debug "$f is already stripped; not saving a copy"
fi
fi
pp_debug "Stripping unnecessary symbols from $f"
strip "$f"
fi
done
if test x"$pp_opt_save_unstripped" = x"true"; then
pp_package_stripped_binaries
fi
}
pp_if_true=0
pp_if_false=0
pp_frontend_init () {
name=
version=
summary="no summary"
description="No description"
copyright="Copyright 2012 Quest Software, Inc. ALL RIGHTS RESERVED."
#-- if the user supplied extra arguments on the command line
# then load them now.
pp_debug "pp_opt_init_vars=$pp_opt_init_vars"
test -n "$pp_opt_init_vars" && eval "$pp_opt_init_vars"
}
pp_is_qualifier () {
typeset ret
case "$1" in
"["*"]") ret=true;;
*) ret=false;;
esac
pp_debug "is_qualifier: $* -> $ret"
test $ret = true
}
pp_eval_qualifier () {
typeset ret
case "$1" in
"[!$pp_platform]"| \
"[!"*",$pp_platform]"| \
"[!$pp_platform,"*"]"| \
"[!"*",$pp_platform,"*"]") ret=false;;
"[!"*"]") ret=true;;
"[$pp_platform]"| \
"["*",$pp_platform]"| \
"[$pp_platform,"*"]"| \
"["*",$pp_platform,"*"]") ret=true;;
"["*"]") ret=false;;
*) pp_die "pp_eval_qualifier: bad qualifier '$1'"
esac
pp_debug "eval: $* -> $ret"
test true = $ret
}
pp_frontend_if () {
typeset ifcmd ifret
ifcmd="$1";
shift
case "$ifcmd" in
%if) if test 0 = $pp_if_false; then
case "$*" in
true |1) pp_incr pp_if_true;;
false|0) pp_incr pp_if_false;;
*)
ifret=true
if pp_is_qualifier "$*"; then
pp_eval_qualifier "$*" || ifret=false
else
eval test "$@" || ifret=false
pp_debug "evaluating test $* -> $ifret"
fi
pp_incr pp_if_$ifret
;;
esac
else
pp_incr pp_if_false
fi;;
%else) test $# = 0 || pp_warn "ignoring argument to %else"
if test $pp_if_false -gt 1; then
: no change
elif test $pp_if_false = 1; then
pp_incr pp_if_true
pp_decr pp_if_false
elif test $pp_if_true = 0; then
pp_die "unmatched %else"
else
pp_incr pp_if_false
pp_decr pp_if_true
fi;;
%endif) test $# = 0 || pp_warn "ignoring argument to %endif"
if test $pp_if_false -gt 0; then
pp_decr pp_if_false
elif test $pp_if_true -gt 0; then
pp_decr pp_if_true
else
pp_die "unmatched %endif"
fi;;
*) pp_die "frontend_if: unknown cmd $ifcmd";;
esac
}
pp_frontend () {
typeset section newsection sed_word sed_ws line cpt svc
typeset section_enabled newsection_enabled s sed sed_candidate
section='%_initial'
newsection='%_initial'
section_enabled=:
newsection_enabled=:
sed_word="[a-zA-Z_][a-zA-Z_0-9]*"
sed_ws="[ ]"
#-- not all seds are created equal
sed=
for sed_candidate in ${PP_SED:-sed} /usr/xpg4/bin/sed; do
if echo 'foo' | $sed_candidate -ne '/^\(x\)*foo/p' | grep foo > /dev/null
then
sed="$sed_candidate"
break
fi
done
test -z "$sed" &&
pp_die "sed is broken on this system"
pp_lineno=0
#-- Note: this sed script should perform similar to pp_eval_qualifier()
$sed -e "/^#/s/.*//" \
-e "/^\\[!\\($sed_word,\\)*$pp_platform\\(,$sed_word\\)*\\]/s/.*//" \
-e "s/^\\[\\($sed_word,\\)*$pp_platform\\(,$sed_word\\)*\\]$sed_ws*//" \
-e "s/^\\[!\\($sed_word,\\)*$sed_word\\]$sed_ws*//" \
-e "/^\\[\\($sed_word,\\)*$sed_word\\]/s/.*//" \
-e "s/^%$sed_ws*/%/" \
-e "s/^$sed_ws/%\\\\&/" \
> $pp_wrkdir/frontend.tmp
#-- add an ignore section at the end to force section completion
echo '%ignore' >> $pp_wrkdir/frontend.tmp
echo >> $pp_wrkdir/frontend.tmp
exec 0<$pp_wrkdir/frontend.tmp
: > $pp_wrkdir/tmp
: > $pp_wrkdir/%fixup
while read -r line; do
#-- Convert leading double-% to single-%, or switch sections
pp_incr pp_lineno
pp_debug "line $pp_lineno: $line"
set -f
set -- $line
set +f
#pp_debug "line $pp_lineno: $*"
case "$line" in %*)
case "$1" in
%if|%else|%endif)
pp_debug "processing if directive $1"
pp_frontend_if "$@"
continue;;
esac
test 0 -ne $pp_if_false && continue # ignore lines %if'd out
case "$1" in
%set|%fixup|%ignore)
pp_debug "processing new section $1"
newsection="$1"; shift
newsection_enabled=:
if pp_is_qualifier "$1"; then
pp_eval_qualifier "$1" || newsection_enabled=false
shift
fi
test $# -eq 0 || pp_warn "ignoring extra arguments: $line"
continue;;
%pre|%post|%preun|%postup|%postun|%files|%depend|%check|%conflict)
pp_debug "processing new component section $*"
s="$1"; shift
if test $# -eq 0 || pp_is_qualifier "$1"; then
cpt=run
else
cpt="$1"
shift
fi
newsection="$s.$cpt"
newsection_enabled=:
if test $# -gt 0 && pp_is_qualifier "$1"; then
pp_eval_qualifier "$1" || newsection_enabled=false
shift
fi
test $# -eq 0 ||
pp_warn "ignoring extra arguments: $line"
case "$cpt" in
run|dbg|doc|dev)
$newsection_enabled && pp_add_component "$cpt";;
x-*) :;; # useful for discarding stuff
*) pp_error "unknown component: $1 $cpt";;
esac
continue;;
%pp)
newsection="%ignore"; shift
if test $# -gt 0; then
pp_set_api_version "$1"
shift
else
pp_error "%pp: missing version"
fi
test $# -gt 0 &&
pp_error "%pp: too many arguments"
continue;;
%service)
pp_debug "processing new service section $1 $2"
s="$1"; shift
if test $# -eq 0 || pp_is_qualifier "$1"; then
pp_error "$s: service name required"
svc=unknown
else
svc="$1"; shift
fi
newsection="$s.$svc"
newsection_enabled=:
if test $# -gt 0 && pp_is_qualifier "$1"; then
pp_eval_qualifier "$1" || newsection_enabled=false
shift
fi
test $# -eq 0 ||
pp_warn "ignoring extra arguments: $line"
$newsection_enabled && pp_add_service "$svc"
continue;;
%\\*)
pp_debug "removing leading %\\"
line="${line#??}"
pp_debug " result is <$line>"
set -f
set -- $line
set +f
;;
%%*)
pp_debug "removing leading %"
line="${line#%}"
set -f
set -- $line
set +f
;;
%*)
pp_error "unknown section $1"
newsection='%ignore'
newsection_enabled=:
continue;;
esac;;
esac
test 0 != $pp_if_false && continue # ignore lines %if'd out
pp_debug "section=$section (enabled=$section_enabled) newsection=$newsection (enabled=$newsection_enabled)"
#-- finish processing a previous section
if test x"$newsection" != x""; then
$section_enabled && case "$section" in
%ignore|%_initial)
pp_debug "leaving ignored section $section"
: ignore # guaranteed to be the last section
;;
%set)
pp_debug "leaving $section: sourcing $pp_wrkdir/tmp"
$pp_opt_debug && cat $pp_wrkdir/tmp >&2
. $pp_wrkdir/tmp
: > $pp_wrkdir/tmp
;;
%pre.*|%preun.*|%post.*|%postup.*|%postun.*|%depend.*|%check.*|%conflict.*|%service.*|%fixup)
pp_debug "leaving $section: substituting $pp_wrkdir/tmp"
# cat $pp_wrkdir/tmp >&2 # debugging
$pp_opt_debug && pp_substitute < $pp_wrkdir/tmp >&2
pp_substitute < $pp_wrkdir/tmp > $pp_wrkdir/tmp.sh
. $pp_wrkdir/tmp.sh >> $pp_wrkdir/$section ||
pp_error "shell error in $section"
rm -f $pp_wrkdir/tmp.sh
: > $pp_wrkdir/tmp
;;
esac
section="$newsection"
section_enabled="$newsection_enabled"
newsection=
fi
#-- ignore section content that is disabled
$section_enabled || continue
#-- process some lines in-place
case "$section" in
%_initial)
case "$line" in "") continue;; esac # ignore non-section blanks
pp_die "Ignoring text before % section introducer";;
%set|%pre.*|%preun.*|%post.*|%postup.*|%postun.*|%check.*|%service.*|%fixup)
pp_debug "appending line to \$pp_wrkdir/tmp"
echo "$line" >> $pp_wrkdir/tmp
;;
%files.*)
test $# -eq 0 && continue;
pp_files_expand "$@" >> $pp_wrkdir/$section
;;
%depend.*)
pp_debug "Adding explicit dependency $@ to $cpt"
echo "$@" >> $pp_wrkdir/%depend.$cpt
;;
%conflict.*)
pp_debug "Adding explicit conflict $@ to $cpt"
echo "$@" >> $pp_wrkdir/%conflict.$cpt
;;
esac
done
exec <&-
if test $pp_if_true != 0 -o $pp_if_false != 0; then
pp_die "missing %endif at end of file"
fi
pp_lineno=
pp_debug " name = $name"
pp_debug " version = $version"
pp_debug " summary = $summary"
pp_debug " description = $description"
pp_debug " copyright = $copyright"
pp_debug ""
pp_debug "\$pp_components: $pp_components"
pp_debug "\$pp_services: $pp_services"
}
pp_set_api_version() {
case "$1" in
1.0) : ;;
*) pp_error "This version of polypackage is too old";;
esac
}
pp_platform=
pp_set_platform () {
if test -n "$pp_opt_platform"; then
pp_contains "$pp_platforms" "$pp_opt_platform" ||
pp_die "$pp_opt_platform: unknown platform"
pp_platform="$pp_opt_platform"
else
uname_s=`uname -s 2>/dev/null`
pp_platform=
for p in $pp_platforms; do
pp_debug "probing for platform $p"
if eval pp_backend_${p}_detect "$uname_s"; then
pp_platform="$p"
break;
fi
done
test -z "$pp_platform" &&
pp_die "cannot detect platform (supported: $pp_platforms)"
fi
pp_debug "pp_platform = $pp_platform"
}
pp_expand_path=
pp_expand_test_usr_bin () {
awk '$1 == "/usr" || $2 == "/usr" {usr++}
$1 == "/bin" || $2 == "/bin" {bin++}
END { if (usr == 1 && bin == 1) exit(0); else exit(1); }'
}
pp_set_expand_converter_or_reexec () {
test -d /usr -a -d /bin ||
pp_die "missing /usr or /bin"
echo /usr /bin | pp_expand_test_usr_bin || pp_die "pp_expand_test_usr_bin?"
if (eval "echo /{usr,bin}" | pp_expand_test_usr_bin) 2>/dev/null; then
pp_expand_path=pp_expand_path_brace
elif (eval "echo /@(usr|bin)" | pp_expand_test_usr_bin) 2>/dev/null; then
pp_expand_path=pp_expand_path_at
else
test x"$pp_expand_rexec" != x"true" ||
pp_die "problem finding shell that can do brace expansion"
for shell in ksh ksh93 bash; do
if ($shell -c 'echo /{usr,bin}' |
pp_expand_test_usr_bin) 2>/dev/null ||
($shell -c 'echo /@(usr|bin)' |
pp_expand_test_usr_bin) 2>/dev/null
then
pp_debug "switching to shell $shell"
pp_expand_rexec=true exec $shell "$0" "$@"
fi
done
pp_die "cannot find a shell that does brace expansion"
fi
}
pp_expand_path_brace () {
typeset f
eval "for f in $1; do echo \"\$f\"; done|sort -u"
}
pp_expand_path_at () {
typeset f
eval "for f in `
echo "$1" | sed -e 's/{/@(/g' -e 's/}/)/g' -e 's/,/|/g'
`; do echo \"\$f\"; done|sort -u"
}
pp_shlib_suffix='.so*'
pp_model_init () {
#@ $pp_components: whitespace-delimited list of components seen in %files
pp_components=
#@ $pp_services: whitespace-delimited list of %service seen
pp_services=
rm -f $pp_wrkdir/%files.* \
$pp_wrkdir/%post.* \
$pp_wrkdir/%pre.* \
$pp_wrkdir/%preun.* \
$pp_wrkdir/%postup.* \
$pp_wrkdir/%postun.* \
$pp_wrkdir/%service.* \
$pp_wrkdir/%set \
$pp_wrkdir/%fixup
}
pp_have_component () {
pp_contains "$pp_components" "$1"
}
pp_have_all_components () {
pp_contains_all "$pp_components" "$@"
}
pp_add_component () {
pp_add_to_list 'pp_components' "$1"
}
pp_add_service () {
pp_add_to_list 'pp_services' "$1"
}
pp_service_init_vars () {
cmd=
pidfile=
stop_signal=15 # SIGTERM
user=root
group=
enable=yes # make it so the service starts on boot
optional=no # Whether installing this service is optional
pp_backend_init_svc_vars
}
pp_service_check_vars () {
test -n "$cmd" ||
pp_error "%service $1: cmd not defined"
case "$enable" in
yes|no) : ;;
*) pp_error "%service $1: \$enable must be set to yes or no";;
esac
}
pp_load_service_vars () {
pp_service_init_vars
. "$pp_wrkdir/%service.$1"
pp_service_check_vars "$1"
}
pp_files_expand () {
typeset _p _mode _group _owner _flags _path _optional _has_target _tree
typeset _path _file _tgt _m _o _g _f _type _lm _ll _lo _lg _ls _lx
typeset _ignore _a
test $# -eq 0 && return
pp_debug "pp_files_expand: path is: $1"
case "$1" in "#"*) return;; esac
_p="$1"; shift
pp_debug "pp_files_expand: other arguments: $*"
#-- the mode must be an octal number of at least three digits
_mode="="
_a=`eval echo \"$1\"`
case "$_a" in
*:*) :;;
-|=|[01234567][01234567][01234567]*) _mode="$_a"; shift;;
esac
#-- the owner:group field may have optional parts
_a=`eval echo \"$1\"`
case "$_a" in
*:*) _group=${_a#*:}; _owner=${_a%:*}; shift;;
=|-) _group=$_a; _owner=$_a; shift;;
*) _group=; _owner=;;
esac
#-- process the flags argument
_flags=
_optional=false
_has_target=false
_ignore=false
if test $# -gt 0; then
_a=`eval echo \"$1\"`
case ",$_a," in *,volatile,*) _flags="${_flags}v";; esac
case ",$_a," in *,optional,*) _optional=true;; esac
case ",$_a," in *,symlink,*) _has_target=true;; esac
case ",$_a," in *,ignore-others,*) _flags="${_flags}i";; esac
case ",$_a," in *,ignore,*) _ignore=true;; esac
shift
fi
#-- process the target argument
if $_has_target; then
test $# -ne 0 || pp_error "$_p: missing target"
_a=`eval echo \"$1\"`
_target="$_a"
shift
fi
pp_debug "pp_files_expand: $_mode|$_owner:$_group|$_flags|$_target|$*"
test $# -eq 0 || pp_error "$_p: too many arguments"
#-- process speciall suffixes
tree=
case "$_p" in
*"/**") _p="${_p%"/**"}"; tree="**";;
*".%so") _p="${_p%".%so"}$pp_shlib_suffix";;
esac
#-- expand the path using the shell glob
pp_debug "expanding .$_p ... with $pp_expand_path"
(cd ${pp_destdir} && $pp_expand_path ".$_p") > $pp_wrkdir/tmp.files.exp
#-- expand path/** by rewriting the glob output file
case "$tree" in
"") : ;;
"**")
pp_debug "expanding /** tree ..."
while read _path; do
_path="${_path#.}"
pp_find_recurse "$pp_destdir${_path%/}"
done < $pp_wrkdir/tmp.files.exp |
sort -u > $pp_wrkdir/tmp.files.exp2
mv $pp_wrkdir/tmp.files.exp2 $pp_wrkdir/tmp.files.exp
;;
esac
while read _path; do
_path="${_path#.}"
_file="${pp_destdir}${_path}"
_tgt=
_m="$_mode"
_o="${_owner:--}"
_g="${_group:--}"
_f="$_flags"
case "$_path" in
/*) :;;
*) pp_warn "$_path: inserting leading /"
_path="/$_path";; # ensure leading /
esac
#-- sanity checks
case "$_path" in
*/../*|*/..) pp_error "$_path: invalid .. in path";;
*/./*|*/.) pp_warn "$_path: invalid component . in path";;
*//*) pp_warn "$_path: redundant / in path";;
esac
#-- set the type based on the real file's type
if $_ignore; then
_type=f _m=_ _o=_ _g=_
elif test -h "$_file"; then
case "$_path" in
*/) pp_warn "$_path (symlink $_file): removing trailing /"
_path="${_path%/}"
;;
esac
_type=s
if test x"$_target" != x"=" -a -n "$_target"; then
_tgt="$_target"
pp_debug "symlink target is $_tgt"
else
_tgt=`pp_readlink "$_file"`;
test -z "$_tgt" && pp_error "can't readlink $_file"
case "$_tgt" in
${pp_destdir}/*)
pp_warn "stripped \$destdir from symlink ($_path)"
_tgt="${_tgt#$pp_destdir}";;
esac
fi
_m=777
elif test -d "$_file"; then
#-- display a warning if the user forgot the trailing /
case "$_path" in
*/) :;;
*) pp_warn "$_path (matching $_file): adding trailing /"
_path="$_path/";;
esac
_type=d
$_has_target && pp_error "$_file: not a symlink"
elif test -f "$_file"; then
case "$_path" in
*/) pp_warn "$_path (matching $_file): removing trailing /"
_path="${_path%/}"
;;
esac
_type=f
$_has_target && pp_error "$_file: not a symlink"
else
$_optional && continue
pp_error "$_file: missing"
_type=f
fi
#-- convert '=' shortcuts into mode/owner/group from ls
case ":$_m:$_o:$_g:" in *:=:*)
if LS_OPTIONS=--color=never /bin/ls -ld "$_file" \
> $pp_wrkdir/ls.tmp
then
read _lm _ll _lo _lg _ls _lx < $pp_wrkdir/ls.tmp
test x"$_m" = x"=" && _m=`pp_mode_from_ls "$_lm"`
test x"$_o" = x"=" && _o="$_lo"
test x"$_g" = x"=" && _g="$_lg"
else
pp_error "cannot read $_file"
test x"$_m" = x"=" && _m=-
test x"$_o" = x"=" && _o=-
test x"$_g" = x"=" && _g=-
fi
;;
esac
test -n "$_f" || _f=-
#-- sanity checks
test -n "$_type" || pp_die "_type empty"
test -n "$_path" || pp_die "_path empty"
test -n "$_m" || pp_die "_m empty"
test -n "$_o" || pp_die "_o empty"
test -n "$_g" || pp_die "_g empty"
#-- setuid/gid files must be given an explicit owner/group (or =)
case "$_o:$_g:$_m" in
-:*:[4657][1357]??|-:*:[4657]?[1357]?|-:*:[4657]??[1357])
pp_error "$_path: setuid file ($_m) missing explicit owner";;
*:-:[2367][1357]??|*:-:[2367]?[1357]?|*:-:[2367]??[1357])
pp_error "$_path: setgid file ($_m) missing explicit group";;
esac
# convert numeric uids into usernames; only works for /etc/passwd
case "$_o" in [0-9]*) _o=`pp_getpwuid $_o`;; esac
case "$_g" in [0-9]*) _g=`pp_getgrgid $_g`;; esac
pp_debug "$_type $_m $_o $_g $_f $_path" $_tgt
$_ignore || echo "$_type $_m $_o $_g $_f $_path" $_tgt
pp_note_file_used "$_path"
case "$_f" in *i*) echo "$_path" >> $pp_wrkdir/ign.files;; esac
done < $pp_wrkdir/tmp.files.exp
}
pp_files_check_duplicates () {
typeset _path
if test -s $pp_wrkdir/all.files; then
sort < $pp_wrkdir/all.files | uniq -d > $pp_wrkdir/duplicate.files
if test -f $pp_wrkdir/ign.awk; then
# Remove ignored files
mv $pp_wrkdir/duplicate.files $pp_wrkdir/duplicate.files.ign
sed -e 's/^/_ _ _ _ _ /' < $pp_wrkdir/duplicate.files.ign |
awk -f $pp_wrkdir/ign.awk |
sed -e 's/^_ _ _ _ _ //' > $pp_wrkdir/duplicate.files
fi
while read _path; do
pp_warn "$_path: file declared more than once"
done <$pp_wrkdir/duplicate.files
fi
}
pp_files_check_coverage () {
pp_find_recurse "$pp_destdir" | sort > $pp_wrkdir/coverage.avail
if test -s $pp_wrkdir/all.files; then
sort -u < $pp_wrkdir/all.files
else
:
fi > $pp_wrkdir/coverage.used
join -v1 $pp_wrkdir/coverage.avail $pp_wrkdir/coverage.used \
> $pp_wrkdir/coverage.not-packaged
if test -s $pp_wrkdir/coverage.not-packaged; then
pp_warn "The following files/directories were found but not packaged:"
sed -e 's,^, ,' < $pp_wrkdir/coverage.not-packaged >&2
fi
join -v2 $pp_wrkdir/coverage.avail $pp_wrkdir/coverage.used \
> $pp_wrkdir/coverage.not-avail
if test -s $pp_wrkdir/coverage.not-avail; then
pp_warn "The following files/directories were named but not found:"
sed -e 's,^, ,' < $pp_wrkdir/coverage.not-avail >&2
fi
}
pp_files_ignore_others () {
typeset p f
test -s $pp_wrkdir/ign.files || return
#-- for each file in ign.files, we remove it from all the
# other %files.* lists, except where it has an i flag.
# rather than scan each list multiple times, we build
# an awk script
pp_debug "stripping ignore files"
while read p; do
echo '$6 == "'"$p"'" && $5 !~ /i/ { next }'
done < $pp_wrkdir/ign.files > $pp_wrkdir/ign.awk
echo '{ print }' >> $pp_wrkdir/ign.awk
$pp_opt_debug && cat $pp_wrkdir/ign.awk
for f in $pp_wrkdir/%files.*; do
mv $f $f.ign
awk -f $pp_wrkdir/ign.awk < $f.ign > $f || pp_error "awk"
done
}
pp_service_scan_groups () {
typeset svc
#-- scan for "group" commands, and build a list of groups
pp_service_groups=
if test -n "$pp_services"; then
for svc in $pp_services; do
group=
. $pp_wrkdir/%service.$svc
if test -n "$group"; then
pp_contains "$pp_services" "$group" && pp_error \
"%service $svc: group name $group in use by a service"
pp_add_to_list 'pp_service_groups' "$group"
echo "$svc" >> $pp_wrkdir/%svcgrp.$group
fi
done
fi
}
pp_service_get_svc_group () {
(tr '\012' ' ' < $pp_wrkdir/%svcgrp.$1 ; echo) | sed -e 's/ $//'
}
for _sufx in _init '' _names _cleanup _install_script \
_init_svc_vars _function _probe _vas_platforms
do
eval "pp_backend$_sufx () { pp_debug pp_backend$_sufx; pp_backend_\${pp_platform}$_sufx \"\$@\"; }"
done
pp_platforms="$pp_platforms aix"
pp_backend_aix_detect () {
test x"$1" = x"AIX"
}
pp_backend_aix_init () {
pp_aix_detect_arch
pp_aix_detect_os
pp_aix_bosboot= # components that need bosboot
pp_aix_lang=en_US
pp_aix_copyright=
pp_aix_start_services_after_install=false
pp_aix_init_services_after_install=true
pp_aix_sudo=sudo # AIX package tools must run as root
case "$pp_aix_os" in
*) pp_readlink_fn=pp_ls_readlink;; # XXX
esac
pp_aix_abis_seen=
}
pp_aix_detect_arch () {
pp_aix_arch_p=`uname -p 2>/dev/null`
case "$pp_aix_arch_p" in
"") pp_debug "can't get processor type from uname -p"
pp_aix_arch_p=powerpc
pp_aix_arch=R;; # guess (lsattr -l proc0 ??)
powerpc) pp_aix_arch=R;;
*) pp_aix_arch_p=intel
pp_aix_arch=I;; # XXX? verify
esac
case "`/usr/sbin/lsattr -El proc0 -a type -F value`" in
PowerPC_POWER*) pp_aix_arch_std=ppc64;;
PowerPC*) pp_aix_arch_std=ppc;;
*) pp_aix_arch_std=unknown;;
esac
}
pp_aix_detect_os () {
typeset r v
r=`uname -r`
v=`uname -v`
pp_aix_os=aix$v$r
}
pp_aix_version_fix () {
typeset v
v=`echo $1 | sed 's/[-+]/./' | tr -c -d '[0-9].\012' | awk -F"." '{ printf "%d.%d.%d.%.4s\n", $1, $2, $3, $4 }' | sed 's/[.]*$//g'`
if test x"$v" != x"$1"; then
pp_warn "stripped version '$1' to '$v'"
fi
case $v in
""|*..*|.*|*.) pp_error "malformed '$1'"
echo "0.0.0.0";;
*.*.*.*.*)
# 5 components are only valid for fileset updates, not base
# filesets (full packages). We trim 5+ components down to 4.
pp_warn "version '$1' has too many dots for AIX, truncating"
echo "$v" | cut -d. -f1-4;;
*.*.*.*) echo "$v";;
*.*.*) echo "$v.0";;
*.*) echo "$v.0.0";;
*) echo "$v.0.0.0";;
esac
}
pp_aix_select () {
case "$1" in
-user) op="";;
-root) op="!";;
*) pp_die "pp_aix_select: bad argument";;
esac
#pp_debug awk '$5 '$op' /^\/(usr|opt)(\/|$)/ { print; }'
#awk '$5 '$op' /^\/(usr|opt)(\/|$)/ { print; }'
awk $op'($6 ~ /^\/usr\// || $6 ~ /^\/opt\//) { print; }'
}
pp_aix_copy_root () {
typeset t m o g f p st target
while read t m o g f p st; do
case "$t" in
d) pp_create_dir_if_missing "$1${p%/}";;
f) pp_add_transient_file "$1$p"
pp_verbose ln "$pp_destdir$p" "$pp_destdir$1$p" ||
pp_error "can't link $p into $1";;
*) pp_warn "pp_aix_copy_root: filetype $t not handled";;
esac
done
}
pp_aix_size () {
typeset prefix t m o g f p st
prefix="$1"
while read t m o g f p st; do
case "$t" in f) du -a "$pp_destdir$p";; esac
done | sed -e 's!/[^/]*$!!' | sort +1 |
awk '{ if ($2 != d)
{ if (sz) print d,sz;
d=$2; sz=0 }
sz += $1; }
END { if (sz) print d,sz }' |
sed -n -e "s!^$pp_destdir!$prefix!p"
}
pp_aix_list () {
awk '{ print "." pfx $6; }' pfx="$1"
}
pp_aix_make_liblpp () {
typeset out dn fl f
out="$1"; shift
dn=`dirname "$2"`
fl=
for f
do
case "$f" in "$dn/"*) fl="$fl `basename $f`" ;;
*) pp_die "liblpp name $f not in $dn/";; esac
done
(cd "$dn" && pp_verbose ar -c -g -r "$out" $fl) || pp_error "ar error"
}
pp_aix_make_script () {
rm -f "$1"
echo "#!/bin/sh" > "$1"
cat >> "$1"
echo "exit 0" >> "$1"
chmod +x "$1"
}
pp_aix_inventory () {
typeset fileset t m o g f p st type
fileset="$1"
while read t m o g f p st; do
case "$p" in *:*) pp_error "path $p contains colon";; esac
echo "$p:"
case "$t" in
f) type=FILE; defm=644 ;;
s) type=SYMLINK; defm=777 ;;
d) type=DIRECTORY; defm=755 ;;
esac
echo " type = $type"
echo " class = inventory,apply,$fileset"
if test x"$m" = x"-"; then m="$defm"; fi
if test x"$o" = x"-"; then o="root"; fi
if test x"$g" = x"-"; then g="system"; fi
echo " owner = $o"
echo " group = $g"
case "$m" in ????)
m=`echo $m|sed -e 's/^1/TCB,/' \
-e 's/^[23]/TCB,SGID,/' \
-e 's/^[45]/TCB,SUID,/' \
-e 's/^[67]/TCB,SUID,SGID,/'`;; # vtx bit ignored
esac
echo " mode = $m"
case "$t" in
f) if test ! -f "$pp_destdir$p"; then
pp_error "$p: missing file"
fi
case "$flags" in
*v*)
echo " size = VOLATILE"
echo " checksum = VOLATILE"
;;
*)
if test -r "$pp_destdir$p"; then
echo " size = $size"
pp_verbose sum -r < "$pp_destdir$p" |
sed -e 's/.*/ checksum = "&"/'
fi
;;
esac;;
s)
echo " target = $st"
;;
esac
#-- Record ABI types seen
case "$t" in
f) if test -r "$pp_destdir$p"; then
case "`file "$pp_destdir$p"`" in
*"executable (RISC System/6000)"*) abi=ppc;;
*"64-bit XCOFF executable"*) abi=ppc64;;
*) abi=;;
esac
if test -n "$abi"; then
pp_add_to_list pp_aix_abis_seen $abi
fi
fi;;
esac
done
}
pp_aix_depend ()
{
if test -s "$1"; then
pp_warn "aix dependencies not implemented"
fi
}
pp_aix_add_service () {
typeset svc cmd_cmd cmd_arg f
svc="$1"
pp_load_service_vars $svc
set -- $cmd
cmd_cmd="$1"; shift
cmd_arg="${pp_aix_mkssys_cmd_args:-$*}";
case "$stop_signal" in
HUP) stop_signal=1;;
INT) stop_signal=2;;
QUIT) stop_signal=3;;
KILL) stop_signal=9;;
TERM) stop_signal=15;;
USR1) stop_signal=30;;
USR2) stop_signal=31;;
"")
pp_error "%service $svc: stop_signal not set";;
[a-zA-Z]*)
pp_error "%service $svc: bad stop_signal ($stop_signal)";;
esac
test -z "$pidfile" || pp_error "aix requires empty pidfile (non daemon)"
pp_add_component run
if test "$user" = "root"; then
uid=0
else
uid="\"\`/usr/bin/id -u $user\`\""
fi
#-- add command text to create/remove the service
cat <<-. >> $pp_wrkdir/%post.$svc
svc=$svc
uid=0
cmd_cmd="$cmd_cmd"
cmd_arg="$cmd_arg"
stop_signal=$stop_signal
force_signal=9
srcgroup="$pp_aix_mkssys_group"
instances_allowed=${pp_aix_mkssys_instances_allowed:--Q}
lssrc -s \$svc > /dev/null 2>&1
if [ \$? -eq 0 ]; then
lssrc -s \$svc | grep "active" > /dev/null 2>&1
if [ \$? -eq 0 ]; then
stopsrc -s \$svc > /dev/null 2>&1
fi
rmsys -s \$svc > /dev/null 2>&1
fi
mkssys -s \$svc -u \$uid -p "\$cmd_cmd" \${cmd_arg:+-a "\$cmd_arg"} -S -n \$stop_signal -f 9 ${pp_aix_mkssys_args} \${srcgroup:+-G \$srcgroup} \$instances_allowed
.
#-- add code to start the service on reboot
${pp_aix_init_services_after_install} &&
cat <<-. >> $pp_wrkdir/%post.$svc
id=\`echo "\$svc" | cut -c1-14\`
mkitab "\$id:2:once:/usr/bin/startsrc -s \$svc" > /dev/null 2>&1
.
${pp_aix_start_services_after_install} &&
cat <<-. >> $pp_wrkdir/%post.$svc
startsrc -s \$svc
.
if [ -f "$pp_wrkdir/%post.run" ];then
cat $pp_wrkdir/%post.run >> $pp_wrkdir/%post.$svc
fi
mv $pp_wrkdir/%post.$svc $pp_wrkdir/%post.run
${pp_aix_init_services_after_install} &&
pp_prepend $pp_wrkdir/%preun.$svc <<-.
rmitab `echo "$svc" | cut -c1-14` > /dev/null 2>&1
.
pp_prepend $pp_wrkdir/%preun.$svc <<-.
stopsrc -s $svc >/dev/null 2>&1
rmssys -s $svc
.
if [ -f "$pp_wrkdir/%preun.run" ];then
cat $pp_wrkdir/%preun.run >> $pp_wrkdir/%preun.$svc
fi
mv $pp_wrkdir/%preun.$svc $pp_wrkdir/%preun.run
}
pp_backend_aix () {
typeset briefex instuser instroot svc cmp outbff
typeset user_wrkdir root_wrkdir
typeset user_files root_files
test -n "$pp_destdir" ||
pp_error "AIX backend requires the '--destdir' option"
instuser="/usr/lpp/$name"
instroot="$instuser/inst_root"
pp_aix_bff_name=${pp_aix_bff_name:-$name}
# Here is the component mapping:
# run -> $pp_aix_bff_name.rte ('Run time environment')
# doc -> $pp_aix_bff_name.doc (non-standard)
# dev -> $pp_aix_bff_name.adt ('Application developer toolkit')
# dbg -> $pp_aix_bff_name.diag ('Diagnostics')
test `echo "$summary" | wc -c ` -gt 40 && pp_error "\$summary too long"
user_wrkdir=$pp_wrkdir/u
root_wrkdir=$pp_wrkdir/r
pp_verbose rm -rf $user_wrkdir $root_wrkdir
pp_verbose mkdir -p $user_wrkdir $root_wrkdir
for svc in $pp_services .; do
test . = "$svc" && continue
pp_aix_add_service $svc
done
{
echo "4 $pp_aix_arch I $name {"
for cmp in $pp_components; do
case "$cmp" in
run) ex=rte briefex="runtime";;
doc) ex=doc briefex="documentation";;
dev) ex=adt briefex="developer toolkit";;
dbg) ex=diag briefex="diagnostics";;
esac
user_files=$pp_wrkdir/%files.$cmp.u
root_files=$pp_wrkdir/%files.$cmp.r
pp_aix_select -user < $pp_wrkdir/%files.$cmp > $user_files
pp_aix_select -root < $pp_wrkdir/%files.$cmp > $root_files
# Default to USR only unless there are root files,
# or a post/pre/check script associated
content=U
if test -s $root_files \
-o -s $pp_wrkdir/%pre.$cmp \
-o -s $pp_wrkdir/%post.$cmp \
-o -s $pp_wrkdir/%preun.$cmp \
-o -s $pp_wrkdir/%postun.$cmp \
-o -s $pp_wrkdir/%check.$cmp
then
content=B
fi
if $pp_opt_debug; then
echo "$cmp USER %files:"
cat $user_files
echo "$cmp ROOT %files:"
cat $root_files
fi >&2
bosboot=N; pp_contains_any "$pp_aix_bosboot" $cmp && bosboot=b
echo $pp_aix_bff_name.$ex \
`[ $pp_aix_version ] && pp_aix_version_fix $pp_aix_version || pp_aix_version_fix "$version"` \
1 $bosboot $content \
$pp_aix_lang "$summary $briefex"
echo "["
pp_aix_depend $pp_wrkdir/%depend.$cmp
echo "%"
# generate per-directory size information
pp_aix_size < $user_files
pp_aix_size $instroot < $root_files
pp_aix_list < $user_files > $user_wrkdir/$pp_aix_bff_name.$ex.al
pp_aix_list $instroot < $root_files >> $user_wrkdir/$pp_aix_bff_name.$ex.al
pp_aix_list < $root_files > $root_wrkdir/$pp_aix_bff_name.$ex.al
if $pp_opt_debug; then
echo "$cmp USER $pp_aix_bff_name.$ex.al:"
cat $user_wrkdir/$pp_aix_bff_name.$ex.al
echo "$cmp ROOT $pp_aix_bff_name.$ex.al:"
cat $root_wrkdir/$pp_aix_bff_name.$ex.al
fi >&2
pp_aix_inventory $pp_aix_bff_name.$ex < $user_files \
> $user_wrkdir/$pp_aix_bff_name.$ex.inventory
pp_aix_inventory $pp_aix_bff_name.$ex < $root_files \
> $root_wrkdir/$pp_aix_bff_name.$ex.inventory
if $pp_opt_debug; then
pp_debug "$cmp USER $pp_aix_bff_name.$ex.inventory:"
cat $user_wrkdir/$pp_aix_bff_name.$ex.inventory
pp_debug "$cmp ROOT $pp_aix_bff_name.$ex.inventory:"
cat $root_wrkdir/$pp_aix_bff_name.$ex.inventory
fi >&2
if test x"" != x"${pp_aix_copyright:-$copyright}"; then
echo "${pp_aix_copyright:-$copyright}" > $user_wrkdir/$pp_aix_bff_name.$ex.copyright
echo "${pp_aix_copyright:-$copyright}" > $root_wrkdir/$pp_aix_bff_name.$ex.copyright
fi
#-- assume that post/pre uninstall scripts only make
# sense when installed in a root context
if test -r $pp_wrkdir/%pre.$cmp; then
pp_aix_make_script $user_wrkdir/$pp_aix_bff_name.$ex.pre_i \
< $pp_wrkdir/%pre.$cmp
fi
if test -r $pp_wrkdir/%post.$cmp; then
pp_aix_make_script $root_wrkdir/$pp_aix_bff_name.$ex.post_i \
< $pp_wrkdir/%post.$cmp
fi
if test -r $pp_wrkdir/%preun.$cmp; then
pp_aix_make_script $root_wrkdir/$pp_aix_bff_name.$ex.unpost_i \
< $pp_wrkdir/%preun.$cmp
fi
if test -r $pp_wrkdir/%postun.$cmp; then
pp_aix_make_script $root_wrkdir/$pp_aix_bff_name.$ex.unpre_i \
< $pp_wrkdir/%postun.$cmp
fi
# remove empty files
for f in $user_wrkdir/$pp_aix_bff_name.$ex.* $root_wrkdir/$pp_aix_bff_name.$ex.*; do
if test ! -s "$f"; then
pp_debug "removing empty $f"
rm -f "$f"
fi
done
# copy/link the root files so we can do an easy backup later
pp_aix_copy_root $instroot < $root_files
echo "%"
echo "]"
done
echo "}"
} > $pp_wrkdir/lpp_name
if $pp_opt_debug; then
echo "/lpp_name :"
cat $pp_wrkdir/lpp_name
fi >&2
#-- copy the /lpp_name file to the destdir
pp_add_transient_file /lpp_name
cp $pp_wrkdir/lpp_name $pp_destdir/lpp_name
#-- copy the liblpp.a files under destdir for packaging
(cd $user_wrkdir && pp_verbose ar -c -g -r liblpp.a $name.*) ||
pp_error "ar error"
if test -s $user_wrkdir/liblpp.a; then
pp_add_transient_file $instuser/liblpp.a
pp_verbose cp $user_wrkdir/liblpp.a $pp_destdir$instuser/liblpp.a ||
pp_error "cannot create user liblpp.a"
fi
(cd $root_wrkdir && pp_verbose ar -c -g -r liblpp.a $name.*) ||
pp_error "ar error"
if test -s $root_wrkdir/liblpp.a; then
pp_add_transient_file $instroot/liblpp.a
pp_verbose cp $root_wrkdir/liblpp.a $pp_destdir$instroot/liblpp.a ||
pp_error "cannot create root liblpp.a"
fi
{ echo ./lpp_name
test -s $user_wrkdir/liblpp.a && echo .$instuser/liblpp.a
test -s $root_wrkdir/liblpp.a && echo .$instroot/liblpp.a
cat $user_wrkdir/$name.*.al # includes the relocated root files!
} > $pp_wrkdir/bff.list
if test -n "$pp_aix_abis_seen" -a x"$pp_aix_arch_std" = x"auto"; then
case "$pp_aix_abis_seen" in
"ppc ppc64"|"ppc64 ppc")
pp_aix_arch_std=ppc64
;;
ppc|ppc64)
pp_aix_arch_std=$pp_aix_abis_seen
;;
*" "*)
pp_warn "multiple architectures detected: $pp_aix_abis_seen"
pp_aix_arch_std=unknown
;;
"")
pp_warn "no binary executables detected; using noarch"
pp_aix_arch_std=noarch
;;
*)
pp_warn "unknown architecture detected $pp_aix_abis_seen"
pp_aix_arch_std=$pp_aix_abis_seen
;;
esac
fi
. $pp_wrkdir/%fixup
outbff=`pp_backend_aix_names`
pp_debug "creating: $pp_wrkdir/$outbff"
(cd $pp_destdir && pp_verbose /usr/sbin/backup -i -q -p -f -) \
< $pp_wrkdir/bff.list \
> $pp_wrkdir/$outbff || pp_error "backup failed"
$pp_aix_sudo /usr/sbin/installp -l -d $pp_wrkdir/$outbff
}
pp_backend_aix_cleanup () {
:
}
pp_backend_aix_names () {
echo "$name.`[ $pp_aix_version ] && pp_aix_version_fix $pp_aix_version || pp_aix_version_fix "$version"`.bff"
}
pp_backend_aix_install_script () {
typeset pkgname platform
#
# The script should take a first argument being the
# operation; further arguments refer to components or services
#
# list-components -- lists components in the pkg
# install component... -- installs the components
# uninstall component... -- uninstalles the components
# list-services -- lists the services in the pkg
# start service... -- starts the name service
# stop service... -- stops the named services
# print-platform -- prints the platform group
#
pkgname="`pp_backend_aix_names`"
platform="`pp_backend_aix_probe`" # XXX should be derived from files
fsets=
for cmp in $pp_components; do
case "$cmp" in
run) ex=rte;;
doc) ex=doc;;
dev) ex=adt;;
dbg) ex=diag;;
esac
fsets="$fsets $name.$ex"
done
echo '#!/bin/sh'
pp_install_script_common
cat <<-.
cpt_to_fileset () {
test x"\$*" = x"all" &&
set -- $pp_components
for cpt
do
case "\$cpt" in
run) echo "$name.rte";;
doc) echo "$name.doc";;
dev) echo "$name.adt";;
dbg) echo "$name.diag";;
*) usage;;
esac
done
}
test \$# -eq 0 && usage
op="\$1"; shift
case "\$op" in
list-components)
test \$# -eq 0 || usage \$op
echo "$pp_components"
;;
list-services)
test \$# -eq 0 || usage \$op
echo "$pp_services"
;;
list-files)
test \$# -ge 1 || usage \$op
echo \${PP_PKGDESTDIR:-.}/$pkgname
;;
install)
test \$# -ge 1 || usage \$op
verbose /usr/sbin/installp -acX -V0 -F \
-d \${PP_PKGDESTDIR:-.}/$pkgname \
\`cpt_to_fileset "\$@"\`
;;
uninstall)
test \$# -ge 1 || usage \$op
verbose /usr/sbin/installp -u -e/dev/null \
-V0 \`cpt_to_fileset "\$@"\`
;;
start|stop)
test \$# -ge 1 || usage \$op
ec=0
for svc
do
verbose \${op}src -s \$svc || ec=1
done
exit \$ec
;;
print-platform)
echo "$platform"
;;
*)
usage;;
esac
.
}
pp_backend_aix_init_svc_vars () {
:
}
pp_backend_aix_probe () {
echo "${pp_aix_os}-${pp_aix_arch_std}"
}
pp_backend_aix_vas_platforms () {
case "${pp_aix_arch_std}" in
ppc*) :;;
*) pp_die "unknown architecture ${pp_aix_arch_std}";;
esac
case "${pp_aix_os}" in
aix43) echo "aix-43";;
aix51) echo "aix-51 aix-43";;
aix52) echo "aix-51 aix-43";;
aix53) echo "aix-53 aix-51 aix-43";;
aix61) echo "aix-53 aix-51 aix-43";;
*) pp_die "unknown system ${pp_aix_os}";;
esac
}
pp_backend_aix_function () {
case "$1" in
pp_mkgroup) cat <<'.';;
/usr/sbin/lsgroup "$1" >/dev/null &&
return 0
echo "Creating group $1"
/usr/bin/mkgroup -A "$1"
.
pp_mkuser:depends) echo pp_mkgroup;;
pp_mkuser) cat <<'.';;
/usr/sbin/lsuser "$1" >/dev/null &&
return 0
pp_mkgroup "${2:-$1}" || return 1
echo "Creating user $1"
/usr/bin/mkuser \
login=false \
rlogin=false \
account_locked=true \
home="${3:-/nohome.$1}" \
pgrp="${2:-$1}" \
"$1"
.
pp_havelib) cat <<'.';;
case "$2" in
"") pp_tmp_name="lib$1.so";;
*.*.*) pp_tmp_name="lib$1.so.$2";;
*.*) pp_tmp_name="lib$1.so.$2.0";;
*) pp_tmp_name="lib$1.so.$2";;
esac
for pp_tmp_dir in `echo "/usr/lib:/lib${3:+:$3}" | tr : ' '`; do
test -r "$pp_tmp_dir/$pp_tmp_name" -a \
-r "$pp_tmp_dir/lib$1.so" && return 0
done
return 1
.
*) false;;
esac
}
pp_platforms="$pp_platforms sd"
pp_backend_sd_detect () {
test x"$1" = x"HP-UX"
}
pp_backend_sd_init () {
pp_sd_sudo=
pp_sd_startlevels=2
pp_sd_stoplevels=auto
pp_sd_config_file=
pp_sd_vendor=
pp_sd_vendor_tag=Quest
pp_sd_default_start=1 # config_file default start value
pp_readlink_fn=pp_ls_readlink # HPUX has no readlink
pp_shlib_suffix='.sl' # .so on most other platforms
pp_sd_detect_os
}
pp_sd_detect_os () {
typeset revision
revision=`uname -r`
pp_sd_os="${revision#?.}"
test -z "$pp_sd_os" &&
pp_warn "cannot detect OS version"
pp_sd_os_std="hpux`echo $pp_sd_os | tr -d .`"
case "`uname -m`" in
9000/[678]??) pp_sd_arch_std=hppa;;
ia64) pp_sd_arch_std=ia64;;
*) pp_sd_arch_std=unknown;;
esac
}
pp_sd_write_files () {
typeset t m o g f p st line dm
while read t m o g f p st; do
line=" file"
case "$f" in *v*) line="$line -v";; esac # FIXME for uninstall
case ${pp_sd_os} in
10.*)
case $t in
f) dm=644;;
d) p=${p%/}; dm=755;;
esac
;;
*)
case $t in
f) dm=644;;
d) line="$line -t d"; p=${p%/}; dm=755;;
s) line="$line -t s";;
esac
;;
esac
test x"$o" = x"-" && o=root
test x"$g" = x"-" && g=sys
test x"$m" = x"-" && m=$dm
case $t in
s)
# swpackage will make unqualified links relative to the
# current working (source) directory, not the destination;
# we need to qualify them to prevent this.
case "$st" in
[!/]*) st="`dirname \"$p\"`/$st";;
esac
echo "$line -o $o -g $g -m $m $st $p"
;;
*)
echo "$line -o $o -g $g -m $m $pp_destdir$p $p"
;;
esac
done
}
pp_sd_service_group_script () {
typeset grp svcs scriptpath out
grp="$1"
svcs="$2"
scriptpath="/sbin/init.d/$grp"
out="$pp_destdir$scriptpath"
pp_add_file_if_missing $scriptpath run 755 || return 0
cat <<-. > $out
#!/sbin/sh
# generated by pp $pp_version
svcs="$svcs"
.
cat <<-'.' >> $out
#-- starts services in order.. stops them all if any break
pp_start () {
undo=
for svc in \$svcs; do
/sbin/init.d/\$svc start
case \$? in
0|4)
undo="\$svc \$undo"
;;
*)
if test -n "\$undo"; then
for svc in \$undo; do
/sbin/init.d/\$svc stop
done
return 1
fi
;;
esac
done
return 0
}
#-- stops services in reverse
pp_stop () {
reverse=
for svc in \$svcs; do
reverse="\$svc \$reverse"
done
rc=0
for svc in \$reverse; do
/sbin/init.d/\$svc stop || rc=\$?
done
return \$rc
}
case \$1 in
start_msg) echo "Starting \$svcs";;
stop_msg) echo "Stopping \$svcs";;
start) pp_start;;
stop) pp_stop;;
*) echo "usage: \$0 {start|stop|start_msg|stop_msg}"
exit 1;;
esac
.
}
pp_sd_service_script () {
typeset svc config_file config_value scriptpath out
svc="$1"
scriptpath="/sbin/init.d/$svc"
config_file=${pp_sd_config_file:-/etc/rc.config.d/$svc}
sd_config_var=`echo run-$svc | tr '[a-z]-' '[A-Z]_'`
sd_config_value=${pp_sd_default_start:-0}
pp_load_service_vars "$svc"
test -n "$user" -a x"$user" != x"root" &&
cmd="SHELL=/usr/bin/sh /usr/bin/su $user -c \"exec `echo $cmd | sed -e 's,[$\\\`],\\&,g'`\""
if test -z "$pidfile"; then
pidfile="/var/run/$svc.pid"
cmd="$cmd & echo \$! > \$pidfile"
fi
pp_debug "config file is $config_file"
pp_add_file_if_missing $scriptpath run 755
pp_add_file_if_missing $config_file run 644 v
cat <<-. >> $pp_destdir$config_file
# Controls whether the $svc service is started
$sd_config_var=$sd_config_value
.
if test ! -f $pp_destdir$scriptpath; then
cat <<-. > $pp_destdir$scriptpath
#!/sbin/sh
# generated by pp $pp_version
svc="$svc"
pidfile="$pidfile"
config_file="$config_file"
pp_start () {
$cmd
}
pp_disabled () {
test \${$sd_config_var:-0} -eq 0
}
pp_stop () {
if test ! -s "\$pidfile"; then
echo "Unable to stop \$svc (no pid file)"
return 1
else
read pid < "\$pidfile"
if kill -0 "\$pid" 2>/dev/null; then
if kill -${stop_signal:-TERM} "\$pid"; then
rm -f "\$pidfile"
return 0
else
echo "Unable to stop \$svc"
return 1
fi
else
rm -f "\$pidfile"
return 0
fi
fi
}
pp_running () {
if test ! -s "\$pidfile"; then
return 1
else
read pid < "\$pidfile"
kill -0 "\$pid" 2>/dev/null
fi
}
case \$1 in
start_msg) echo "Starting the \$svc service";;
stop_msg) echo "Stopping the \$svc service";;
start)
if test -f "\$config_file"; then
. \$config_file
fi
if pp_disabled; then
exit 2
elif pp_running; then
echo "\$svc already running";
exit 0
elif pp_start; then
echo "\$svc started";
# rc(1M) says we should exit 4, but nobody expects it!
exit 0
else
exit 1
fi;;
stop) if pp_stop; then
echo "\$svc stopped";
exit 0
else
exit 1
fi;;
*) echo "usage: \$0 {start|stop|start_msg|stop_msg}"
exit 1;;
esac
.
fi
}
pp_sd_make_service () {
typeset level startpriority stoppriority startlevels stoplevels
typeset svc svcvar symtype
svc="$1"
svcvar=`pp_makevar $svc`
case ${pp_sd_os} in
10.*) symtype="file";;
*) symtype="file -t s";;
esac
# TODO: Figure out why this check is here
#-- don't do anything if the script exists
#if test -s "$pp_destdir/sbin/init.d/$svc"; then
# pp_error "$pp_destdir/sbin/init.d/$svc exists"
# return
#fi
# symlink the script, depending on the priorities chosen
eval startpriority='${pp_sd_startpriority_'$svcvar'}'
eval stoppriority='${pp_sd_stoppriority_'$svcvar'}'
test -z "$startpriority" && startpriority="${pp_sd_startpriority:-50}"
test -z "$stoppriority" && stoppriority="${pp_sd_stoppriority:-50}"
eval startlevels='${pp_sd_startlevels_'$svcvar'}'
test -z "$startlevels" && startlevels="$pp_sd_startlevels"
eval stoplevels='${pp_sd_stoplevels_'$svcvar'}'
test -z "$stoplevels" && stoplevels="$pp_sd_stoplevels"
# create the script and config file
pp_sd_service_script $svc
# fix the priority up
case "$startpriority" in
???) :;;
??) startpriority=0$startpriority;;
?) startpriority=00$startpriority;;
esac
case "$stoppriority" in
???) :;;
??) stoppriority=0$stoppriority;;
?) stoppriority=00$stoppriority;;
esac
if test x"$stoplevels" = x"auto"; then
stoplevels=
test -z "$startlevels" || for level in $startlevels; do
stoplevels="$stoplevels `expr $level - 1`"
done
fi
# create the symlinks
test -z "$startlevels" || for level in $startlevels; do
echo " ${symtype}" \
"/sbin/init.d/$svc" \
"/sbin/rc$level.d/S$startpriority$svc"
done
test -z "$stoplevels" || for level in $stoplevels; do
echo " ${symtype}" \
"/sbin/init.d/$svc" \
"/sbin/rc$level.d/K$stoppriority$svc"
done
}
pp_sd_control () {
typeset ctrl script
typeset cpt
ctrl="$1"; shift
cpt="$1"; shift
script="$pp_wrkdir/control.$ctrl.$cpt"
cat <<. >$script
.
cat "$@" >> $script
echo "exit 0" >> $script
/usr/bin/chmod +x $script
echo " $ctrl $script"
}
pp_sd_depend () {
typeset _name _vers
while read _name _vers; do
case "$_name" in ""| "#"*) continue ;; esac
echo " prerequisites $_name ${_vers:+r>= $_vers}"
done
}
pp_sd_conflict () {
typeset _name _vers
while read _name _vers; do
case "$_name" in ""| "#"*) continue ;; esac
echo " exrequisites $_name ${_vers:+r>= $_vers}"
done
}
pp_backend_sd () {
typeset psf cpt svc outfile release swp_flags
psf=$pp_wrkdir/psf
release="?.${pp_sd_os%.[0-9][0-9]}.*"
echo "depot" > $psf
echo "layout_version 1.0" >>$psf
#-- vendor
cat <<. >>$psf
vendor
tag $pp_sd_vendor_tag
title "${pp_sd_vendor:-$vendor}"
end
product
tag $name
revision $version
vendor_tag $pp_sd_vendor_tag
is_patch false
title "$summary"
copyright "$copyright"
machine_type *
os_name HP-UX
os_release $release
os_version ?
directory /
is_locatable false
.
test -n "$description" \
&& echo $description > $pp_wrkdir/description \
&& cat <<. >> $psf
description < $pp_wrkdir/description
.
# make convenience service groups
if test -n "$pp_service_groups"; then
for grp in $pp_service_groups; do
pp_sd_service_group_script \
$grp "`pp_service_get_svc_group $grp`"
done
fi
for cpt in $pp_components; do
cat <<. >>$psf
fileset
tag ${pp_sd_fileset_tag:-$cpt}
title "${summary:-cpt}"
revision $version
.
test -s $pp_wrkdir/%depend.$cpt &&
pp_sd_depend < $pp_wrkdir/%depend.$cpt >> $psf
test -s $pp_wrkdir/%conflict.$cpt &&
pp_sd_conflict < $pp_wrkdir/%conflict.$cpt >> $psf
#-- make sure services are shut down during uninstall
if test $cpt = run -a -n "$pp_services"; then
for svc in $pp_services; do
pp_prepend $pp_wrkdir/%preun.$cpt <<-.
/sbin/init.d/$svc stop
.
done
fi
#-- we put the post/preun code into configure/unconfigure
# and not postinstall/preremove, because configure/unconfigure
# scripts are run on the hosts where the package is installed,
# not loaded (a subtle difference).
test -s $pp_wrkdir/%pre.$cpt &&
pp_sd_control checkinstall $cpt $pp_wrkdir/%pre.$cpt >> $psf
test -s $pp_wrkdir/%post.$cpt &&
pp_sd_control configure $cpt $pp_wrkdir/%post.$cpt >> $psf
test -s $pp_wrkdir/%preun.$cpt &&
pp_sd_control unconfigure $cpt $pp_wrkdir/%preun.$cpt >> $psf
test -s $pp_wrkdir/%postun.$cpt &&
pp_sd_control postremove $cpt $pp_wrkdir/%postun.$cpt >> $psf
test -s $pp_wrkdir/%check.$cpt &&
pp_sd_control checkinstall $cpt $pp_wrkdir/%check.$cpt >> $psf
if test $cpt = run -a -n "$pp_services"; then
for svc in $pp_services; do
#-- service names are 10 chars max on hpux
case "$svc" in ???????????*)
pp_warn "service name '$svc' is too long for hpux";;
esac
pp_sd_make_service $svc >> $psf
done
#pp_sd_make_service_config
fi
pp_sd_write_files < $pp_wrkdir/%files.$cpt >> $psf
#-- end fileset clause
cat <<. >>$psf
end
.
done
#-- end product clause
cat <<. >>$psf
end
.
$pp_opt_debug && cat $psf >&2
test -s $pp_wrkdir/%fixup && . $pp_wrkdir/%fixup
outfile=`pp_backend_sd_names`
case ${pp_sd_os} in
10.*)
swp_flags="-x target_type=tape"
;;
*)
swp_flags="-x media_type=tape"
;;
esac
if pp_verbose ${pp_sd_sudo} /usr/sbin/swpackage -s $psf $swp_flags \
@ $pp_wrkdir/$outfile
then
pp_verbose ${pp_sd_sudo} /usr/sbin/swlist -l file -s $pp_wrkdir/$outfile
else
pp_error "swpackage failed"
fi
}
pp_backend_sd_cleanup () {
:
}
pp_backend_sd_names () {
echo "$name-$version.$pp_sd_arch_std.depot"
}
pp_backend_sd_install_script () {
typeset pkgname platform
pkgname=`pp_backend_sd_names`
platform="`pp_backend_sd_probe`"
echo "#!/bin/sh"
pp_install_script_common
cat <<.
cpt_to_tags () {
test x"\$*" = x"all" && set -- $pp_components
for cpt
do
echo "$name.\$cpt"
done
}
test \$# -eq 0 && usage
op="\$1"; shift
case "\$op" in
list-components)
test \$# -eq 0 || usage \$op
echo "$pp_components"
;;
list-services)
test \$# -eq 0 || usage \$op
echo "$pp_services"
;;
list-files)
test \$# -ge 1 || usage \$op
echo \${PP_PKGDESTDIR:-.}/$pkgname
;;
install)
test \$# -ge 1 || usage \$op
verbose /usr/sbin/swinstall -x verbose=0 \
-s \${PP_PKGDESTDIR:-\`pwd\`}/$pkgname \
\`cpt_to_tags "\$@"\`
;;
uninstall)
test \$# -ge 1 || usage \$op
verbose /usr/sbin/swremove -x verbose=0 \
\`cpt_to_tags "\$@"\`
;;
start|stop)
test \$# -ge 1 || usage \$op
ec=0
for svc
do
verbose /sbin/init.d/\$svc \$op
[ \$? -eq 4 -o \$? -eq 0 ] || ec=1
done
exit \$ec
;;
print-platform)
echo "$platform"
;;
*)
usage
;;
esac
.
}
pp_backend_sd_probe () {
echo "${pp_sd_os_std}-${pp_sd_arch_std}"
}
pp_backend_sd_vas_platforms () {
case "`pp_backend_sd_probe`" in
hpux*-hppa) echo hpux-pa;;
hpux*-ia64) echo hpux-ia64 hpux-pa;;
*) pp_die "unknown system `pp_backend_sd_probe`";;
esac
}
pp_backend_sd_init_svc_vars () {
:
}
pp_backend_sd_function () {
case "$1" in
pp_mkgroup) cat <<'.';;
/usr/sbin/groupmod "$1" 2>/dev/null ||
/usr/sbin/groupadd "$1"
.
pp_mkuser:depends) echo pp_mkgroup;;
pp_mkuser) cat <<'.';;
pp_mkgroup "${2:-$1}" || return 1
/usr/sbin/useradd \
-g "${2:-$1}" \
-d "${3:-/nonexistent}" \
-s "${4:-/bin/false}" \
"$1"
.
pp_havelib) cat <<'.';;
for pp_tmp_dir in `echo /usr/lib${3:+:$3} | tr : ' '`; do
test -r "$pp_tmp_dir/lib$1${2:+.$2}.sl" && return 0
done
return 1
.
*) false;;
esac
}
pp_platforms="$pp_platforms solaris"
pp_backend_solaris_detect () {
test x"$1" = x"SunOS"
}
pp_backend_solaris_init () {
pp_solaris_category=
pp_solaris_istates="s S 1 2 3" # run-states when install is ok
pp_solaris_rstates="s S 1 2 3" # run-states when remove is ok
pp_solaris_maxinst=
pp_solaris_vendor=
pp_solaris_pstamp=
pp_solaris_copyright=
pp_solaris_name=
pp_solaris_desc=
pp_solaris_package_arch=auto
pp_solaris_detect_os
pp_solaris_detect_arch
pp_solaris_init_svc
#-- readlink not reliably available on Solaris
pp_readlink_fn=pp_ls_readlink
}
pp_solaris_detect_os () {
typeset osrel
osrel=`/usr/bin/uname -r`
case "$osrel" in
5.[0-6]) pp_solaris_os="sol2${osrel#5.}";;
5.*) pp_solaris_os="sol${osrel#5.}";;
esac
test -z "$pp_solaris_os" &&
pp_warn "can't determine OS suffix from uname -r"
}
pp_solaris_detect_arch () {
pp_solaris_arch=`/usr/bin/optisa amd64 sparcv9 i386 sparc`
[ -z "$pp_solaris_arch" ] &&
pp_error "can't determine processor architecture"
case "$pp_solaris_arch" in
amd64) pp_solaris_arch_std=x86_64;;
i386) pp_solaris_arch_std=i386;;
sparcv9) pp_solaris_arch_std=sparc64;;
sparc) pp_solaris_arch_std=sparc;;
*) pp_solaris_arch_std=unknown;;
esac
}
pp_solaris_is_request_script_necessary () {
typeset has_optional_services
has_optional_services=no
for _svc in $pp_services; do
pp_load_service_vars $_svc
if test "$optional" = "yes"; then
has_optional_services=yes
fi
done
# If the package has no optional services and only one component, don't
# create a request script at all.
if test "$has_optional_services" = "no" &&
test `echo $pp_components | wc -w` -eq 1; then
return 1 # no
fi
return 0 # yes
}
pp_solaris_request () {
typeset _cmp _svc
#-- The common part of the request script contains the ask() function
# and resets the CLASSES list to empty
cat <<'.'
trap 'exit 3' 15
ask () {
ans=`ckyorn -d "$1" \
-p "Do you want to $2"` \
|| exit $?
case "$ans" in y*|Y*) return 0;; *) return 1;; esac
}
CLASSES=
.
#-- each of our components adds itself to the CLASSES list
for _cmp in $pp_components; do
case "$_cmp" in
run) :;;
doc) echo 'ask y "install the documentation files" &&';;
dev) echo 'ask y "install the development files" &&';;
dbg) echo 'ask n "install the diagnostic files" &&';;
esac
echo ' CLASSES="$CLASSES '$_cmp'"'
done
#-- the request script writes the CLASSES var to its output
cat <<'.'
echo "CLASSES=$CLASSES" > $1
.
if test -n "$pp_services"; then
echo 'SERVICES='
for _svc in $pp_services; do
pp_load_service_vars $_svc
if test "$enable" = "yes"; then
_default_prompt=y
else
_default_prompt=n
fi
if test "$optional" = "yes"; then
echo 'ask '$_default_prompt' "install '$_svc' service" &&'
fi
echo ' SERVICES="$SERVICES '$_svc'"'
done
echo 'echo "SERVICES=$SERVICES" >> $1'
fi
}
pp_solaris_procedure () {
cat <<.
#-- $2 for $1 component of $name
case " \$CLASSES " in *" $1 "*)
.
cat
cat <<.
;; esac
.
}
pp_solaris_depend () {
typeset _name _vers
while read _name _vers; do
if test -n "$_name"; then
echo "P $_name $_name"
test -n "$_vers" && echo " $_vers"
fi
done
}
pp_solaris_conflict () {
typeset _name _vers
while read _name _vers; do
if test -n "$_name"; then
echo "I $_name $_name"
test -n "$_vers" && echo " $_vers"
fi
done
}
pp_solaris_space() {
echo "$2:$3:$1" >> $pp_wrkdir/space.cumulative
}
pp_solaris_sum_space () {
if test -s $pp_wrkdir/space.cumulative; then
sort -t: +2 < $pp_wrkdir/space.cumulative |
awk -F: 'NR==1{n=$3}{if($3==n){b+=$1;i+=$2}else{print n" "b" "i;b=$1;i=$2;n=$3}}END{print n" "b" "i}' > $pp_wrkdir/space
fi
}
pp_solaris_proto () {
typeset t m o g f p st
typeset abi
while read t m o g f p st; do
# Use Solaris default mode, owner and group if all unspecified
if test x"$m$o$g" = x"---"; then
m="?"; o="?"; g="?"
fi
test x"$o" = x"-" && o="root"
case "$t" in
f) test x"$g" = x"-" && g="bin"
test x"$m" = x"-" && m=444
case "$f" in
*v*) echo "v $1 $p=$pp_destdir$p $m $o $g";;
*) echo "f $1 $p=$pp_destdir$p $m $o $g";;
esac
if test -r "$pp_destdir$p"; then
#-- Use file to record ABI types seen
case "`file "$pp_destdir$p"`" in
*"ELF 32"*80386*) abi=i386;;
*"ELF 64"*AMD*) abi=x86_64;;
*"ELF 32"*SPARC*) abi=sparc;;
*"ELF 64"*SPARC*) abi=sparc64;;
*) abi=;;
esac
if test -n "$abi"; then
pp_add_to_list pp_solaris_abis_seen $abi
fi
fi
;;
d) test x"$g" = x"-" && g="sys"
test x"$m" = x"-" && m=555
echo "d $1 $p $m $o $g"
;;
s) test x"$g" = x"-" && g="bin"
test x"$m" = x"-" && m=777
if test x"$m" != x"777" -a x"$m" != x"?"; then
pp_warn "$p: invalid mode $m for symlink, should be 777 or -"
fi
echo "s $1 $p=$st $m $o $g"
;;
esac
done
}
pp_backend_solaris () {
typeset _cmp _svc _grp
prototype=$pp_wrkdir/prototype
: > $prototype
pkginfo=$pp_wrkdir/pkginfo
: > $pkginfo
echo "i pkginfo=$pkginfo" >> $prototype
case "${pp_solaris_name:-$name}" in
[0-9]*)
pp_error "Package name '${pp_solaris_name:-$name}'" \
"cannot start with a number"
;;
???????????????*)
pp_warn "Package name '${pp_solaris_name:-$name}'" \
"too long for Solaris 2.6 or 2.7 (max 9 characters)"
;;
??????????*)
pp_warn "Package name '${pp_solaris_name:-$name}'" \
"too long for 2.7 Solaris (max 9 characters)"
;;
esac
#-- generate the package info file
echo "VERSION=$version" >> $pkginfo
echo "PKG=${pp_solaris_name:-$name}" >> $pkginfo
echo "CLASSES=$pp_components" >> $pkginfo
echo "BASEDIR=/" >> $pkginfo
echo "NAME=$name $version" >> $pkginfo
echo "CATEGORY=${pp_solaris_category:-application}" >> $pkginfo
desc="${pp_solaris_desc:-$description}"
test -n "$desc" &&
echo "DESC=$desc" >> $pkginfo
test -n "$pp_solaris_rstates" &&
echo "RSTATES=$pp_solaris_rstates" >> $pkginfo
test -n "$pp_solaris_istates" &&
echo "ISTATES=$pp_solaris_istates" >> $pkginfo
test -n "$pp_solaris_maxinst" &&
echo "MAXINST=$pp_solaris_maxinst" >> $pkginfo
test -n "${pp_solaris_vendor:-$vendor}" &&
echo "VENDOR=${pp_solaris_vendor:-$vendor}" >> $pkginfo
test -n "$pp_solaris_pstamp" &&
echo "PSTAMP=$pp_solaris_pstamp" >> $pkginfo
if test -n "${pp_solaris_copyright:-$copyright}"; then
echo "${pp_solaris_copyright:-$copyright}" > $pp_wrkdir/copyright
echo "i copyright=$pp_wrkdir/copyright" >> $prototype
fi
#-- scripts to run before and after install
: > $pp_wrkdir/postinstall
: > $pp_wrkdir/preremove
: > $pp_wrkdir/postremove
for _cmp in $pp_components; do
#-- add the preinstall scripts in definition order
if test -s $pp_wrkdir/%pre.$_cmp; then
pp_solaris_procedure $_cmp preinst < $pp_wrkdir/%pre.$_cmp \
>> $pp_wrkdir/preinstall
fi
#-- add the postinstall scripts in definition order
if test -s $pp_wrkdir/%post.$_cmp; then
pp_solaris_procedure $_cmp postinst < $pp_wrkdir/%post.$_cmp \
>> $pp_wrkdir/postinstall
fi
#-- add the preremove rules in reverse definition order
if test -s $pp_wrkdir/%preun.$_cmp; then
pp_solaris_procedure $_cmp preremove < $pp_wrkdir/%preun.$_cmp |
pp_prepend $pp_wrkdir/preremove
fi
#-- add the postremove scripts in definition order
if test -s $pp_wrkdir/%postun.$_cmp; then
pp_solaris_procedure $_cmp postremove < $pp_wrkdir/%postun.$_cmp \
>> $pp_wrkdir/postremove
fi
#-- Add the check script in definition order
if test -s $pp_wrkdir/%check.$_cmp; then
pp_solaris_procedure $_cmp checkinstall \
< $pp_wrkdir/%check.$_cmp \
>> $pp_wrkdir/checkinstall
fi
#-- All dependencies and conflicts are merged together for Solaris pkgs
test -s $pp_wrkdir/%depend.$_cmp &&
pp_solaris_depend < $pp_wrkdir/%depend.$_cmp >> $pp_wrkdir/depend
test -s $pp_wrkdir/%conflict.$_cmp &&
pp_solaris_conflict < $pp_wrkdir/%conflict.$_cmp >> $pp_wrkdir/depend
done
if pp_solaris_is_request_script_necessary; then
pp_solaris_request > $pp_wrkdir/request
fi
test -n "$pp_services" &&
for _svc in $pp_services; do
pp_load_service_vars $_svc
pp_solaris_smf $_svc
pp_solaris_make_service $_svc
pp_solaris_install_service $_svc | pp_prepend $pp_wrkdir/postinstall
pp_solaris_remove_service $_svc | pp_prepend $pp_wrkdir/preremove
pp_solaris_remove_service $_svc | pp_prepend $pp_wrkdir/postremove
unset pp_svc_xml_file
done
test -n "$pp_service_groups" &&
for _grp in $pp_service_groups; do
pp_solaris_make_service_group \
$_grp "`pp_service_get_svc_group $_grp`"
done
#-- if installf was used; we need to indicate a termination
grep installf $pp_wrkdir/postinstall >/dev/null &&
echo 'installf -f $PKGINST' >> $pp_wrkdir/postinstall
pp_solaris_sum_space
# NB: pkginfo and copyright are added earlier
for f in compver depend space checkinstall \
preinstall request postinstall \
preremove postremove; do
if test -s $pp_wrkdir/$f; then
case $f in
*install|*remove|request)
# turn scripts into a proper shell scripts
mv $pp_wrkdir/$f $pp_wrkdir/$f.tmp
{ echo "#!/bin/sh";
echo "# $f script for ${pp_solaris_name:-$name}-$version"
cat $pp_wrkdir/$f.tmp
echo "exit 0"; } > $pp_wrkdir/$f
chmod +x $pp_wrkdir/$f
rm -f $pp_wrkdir/$f.tmp
;;
esac
if $pp_opt_debug; then
pp_debug "contents of $f:"
cat $pp_wrkdir/$f >&2
fi
echo "i $f=$pp_wrkdir/$f" >> $prototype
fi
done
#-- create the prototype file which lists the files to install
# do this as late as possible because files could be added
pp_solaris_abis_seen=
for _cmp in $pp_components; do
pp_solaris_proto $_cmp < $pp_wrkdir/%files.$_cmp
done >> $prototype
if test x"$pp_solaris_package_arch" = x"auto"; then
if pp_contains "$pp_solaris_abis_seen" sparc64; then
pp_solaris_package_arch_std="sparc64"
echo "ARCH=sparcv9" >> $pkginfo
elif pp_contains "$pp_solaris_abis_seen" sparc; then
pp_solaris_package_arch_std="sparc"
echo "ARCH=sparc" >> $pkginfo
elif pp_contains "$pp_solaris_abis_seen" x86_64; then
pp_solaris_package_arch_std="x86_64"
echo "ARCH=amd64" >> $pkginfo
elif pp_contains "$pp_solaris_abis_seen" i386; then
pp_solaris_package_arch_std="i386"
echo "ARCH=i386" >> $pkginfo
else
pp_warn "No ELF files found: not supplying an ARCH type"
pp_solaris_package_arch_std="noarch"
fi
else
pp_solaris_package_arch_std="$pp_solaris_package_arch"
echo "ARCH=$pp_solaris_package_arch" >> $pkginfo
fi
mkdir $pp_wrkdir/pkg
. $pp_wrkdir/%fixup
if $pp_opt_debug; then
echo "$pkginfo::"; cat $pkginfo
echo "$prototype::"; cat $prototype
fi >&2
pkgmk -d $pp_wrkdir/pkg -f $prototype \
|| { error "pkgmk failed"; return; }
pkgtrans -s $pp_wrkdir/pkg \
$pp_wrkdir/`pp_backend_solaris_names` \
${pp_solaris_name:-$name} \
|| { error "pkgtrans failed"; return; }
}
pp_backend_solaris_cleanup () {
:
}
pp_backend_solaris_names () {
echo ${pp_solaris_name:-$name}-$version-${pp_solaris_package_arch_std:-$pp_solaris_arch}.pkg
}
pp_backend_solaris_install_script () {
typeset pkgname platform
platform="${pp_solaris_os:-solaris}-${pp_solaris_package_arch_std:-$pp_solaris_arch}"
echo "#! /sbin/sh"
pp_install_script_common
pkgname=`pp_backend_solaris_names`
cat <<.
tmpnocheck=/tmp/nocheck\$\$
tmpresponse=/tmp/response\$\$
trap 'rm -f \$tmpnocheck \$tmpresponse' 0
make_tmpfiles () {
cat <<-.. > \$tmpresponse
CLASSES=\$*
SERVICES=$pp_services
..
cat <<-.. > \$tmpnocheck
mail=
instance=overwrite
partial=nocheck
runlevel=nocheck
idepend=nocheck
rdepend=nocheck
space=nocheck
setuid=nocheck
conflict=nocheck
action=nocheck
basedir=default
..
}
test \$# -eq 0 && usage
op="\$1"; shift
case "\$op" in
list-components)
test \$# -eq 0 || usage \$op
echo "$pp_components"
;;
list-services)
test \$# -eq 0 || usage \$op
echo "$pp_services"
;;
list-files)
test \$# -ge 1 || usage \$op
echo \${PP_PKGDESTDIR:-.}/$pkgname
;;
install)
test \$# -ge 1 || usage \$op
make_tmpfiles "\$@"
verbose /usr/sbin/pkgadd -n -d \${PP_PKGDESTDIR:-.}/$pkgname \
-r \$tmpresponse \
-a \$tmpnocheck \
${pp_solaris_name:-$name}
;;
uninstall)
test \$# -ge 1 || usage \$op
make_tmpfiles "\$@"
verbose /usr/sbin/pkgrm -n \
-a \$tmpnocheck \
${pp_solaris_name:-$name}
;;
start|stop)
test \$# -ge 1 || usage \$op
ec=0
for svc
do
verbose /etc/init.d/\$svc \$op || ec=1
done
exit \$ec
;;
print-platform)
echo "$platform"
;;
*)
usage
;;
esac
.
}
pp_solaris_dynlib_depend () {
xargs ldd 2>/dev/null |
sed -e '/^[^ ]*:$/d' -e 's,.*=>[ ]*,,' -e 's,^[ ]*,,' |
sort -u |
grep -v '^/usr/platform/' | (
set -- ""; shift
while read p; do
set -- "$@" -p "$p"
if [ $# -gt 32 ]; then
echo "$# is $#" >&2
pkgchk -l "$@"
set -- ""; shift
fi
done
[ $# -gt 0 ] && pkgchk -l "$@"
)|
awk '/^Current status:/{p=0} p==1 {print $1} /^Referenced by/ {p=1}' |
sort -u |
xargs -l32 pkginfo -x |
awk 'NR % 2 == 1 { name=$1; } NR%2 == 0 { print name, $2 }'
}
pp_solaris_add_dynlib_depends () {
typeset tmp
tmp=$pp_wrkdir/tmp.dynlib
for _cmp in $pp_components; do
awk '{print destdir $6}' destdir="$pp_destdir" \
< $pp_wrkdir/%files.$_cmp |
pp_solaris_dynlib_depend > $tmp
if test -s $tmp; then
cat $tmp >> $pp_wrkdir/%depend.$_cmp
fi
rm -f $tmp
done
}
pp_backend_solaris_probe () {
echo "${pp_solaris_os}-${pp_solaris_arch_std}"
}
pp_backend_solaris_vas_platforms () {
case `pp_backend_solaris_probe` in
sol10-sparc* | sol9-sparc* | sol8-sparc*)
echo solaris8-sparc solaris7-sparc solaris26-sparc;;
sol7-sparc*) echo solaris7-sparc solaris26-sparc;;
sol26-sparc*) echo solaris26-sparc;;
sol8-*86) echo solaris8-x86;;
sol10-*86 | sol10-x86_64)
echo solaris10-x64 solaris8-x86;;
*) pp_die "unknown system `pp_backend_solaris_probe`";;
esac
}
pp_backend_solaris_function() {
case "$1" in
pp_mkgroup) cat<<'.';;
/usr/sbin/groupmod "$1" 2>/dev/null && return 0
/usr/sbin/groupadd "$1"
.
pp_mkuser:depends) echo pp_mkgroup;;
pp_mkuser) cat<<'.';;
id "$1" >/dev/null 2>/dev/null && return 0
pp_mkgroup "${2:-$1}" || return 1
/usr/sbin/useradd \
-g "${2:-$1}" \
-d "${3:-/nonexistent}" \
-s "${4:-/bin/false}" \
"$1"
.
*) false;;
esac
}
pp_backend_solaris_init_svc_vars () {
_smf_category=${pp_solaris_smf_category:-application}
_smf_method_envvar_name=${smf_method_envvar_name:-"PP_SMF_SERVICE"}
pp_solaris_service_shell=/sbin/sh
}
pp_solaris_init_svc () {
smf_version=1
smf_type=service
solaris_user=
solaris_stop_signal=
solaris_sysv_init_start=S70 # invocation order for start scripts
solaris_sysv_init_kill=K30 # invocation order for kill scripts
solaris_sysv_init_start_states="2" # states to install start link
solaris_sysv_init_kill_states="S 0 1" # states to install kill link
#
# To have the service be installed to start automatically,
# %service foo
# solaris_sysv_init_start_states="S 0 1 2"
#
}
pp_solaris_smf () {
typeset f _pp_solaris_service_script svc _pp_solaris_manpage
pp_solaris_name=${pp_solaris_name:-$name}
pp_solaris_manpath=${pp_solaris_manpath:-"/usr/share/man"}
pp_solaris_mansect=${pp_solaris_mansect:-1}
smf_start_timeout=${smf_start_timeout:-60}
smf_stop_timeout=${smf_stop_timeout:-60}
smf_restart_timeout=${smf_restart_timeout:-60}
svc=${pp_solaris_smf_service_name:-$1}
_pp_solaris_service_script=${pp_solaris_service_script:-"/etc/init.d/${pp_solaris_service_script_name:-$svc}"}
_pp_solaris_manpage=${pp_solaris_manpage:-$svc}
if [ -z $pp_svc_xml_file ]; then
pp_svc_xml_file="/var/svc/manifest/$_smf_category/$svc.xml"
echo "## Generating the smf service manifest file for $pp_svc_xml_file"
else
echo "## SMF service manifest file already defined at $pp_svc_xml_file"
if [ -z $pp_solaris_smf_service_name ] || [ -z $pp_solaris_smf_category ] || [ -z $pp_solaris_service_script ] || [ -z $smf_method_envvar_name ]; then
pp_error "All required variables are not set.\n"\
"When using a custom manifest file all of the following variables must be set:\n"\
"pp_solaris_smf_service_name, pp_solaris_smf_category, pp_solaris_service_script and smf_method_envvar_name.\n\n"\
"Example:\n"\
" \$pp_solaris_smf_category=application\n"\
" \$pp_solaris_smf_service_name=pp\n\n"\
" \n\n"\
"Example:\n"\
" \$pp_solaris_service_script=/etc/init.d/pp\n\n"\
" \n\n"\
"Example:\n"\
" \$smf_method_envvar_name=PP_SMF_SERVICE\n\n"\
" \n"\
" \n"\
" \n"
return 1
fi
return 0
fi
f=$pp_svc_xml_file
pp_add_file_if_missing $f ||
return 0
pp_solaris_add_parent_dirs "$f"
_pp_solaris_smf_dependencies="
"
_pp_solaris_smf_dependencies=${pp_solaris_smf_dependencies:-$_pp_solaris_smf_dependencies}
cat <<-. >$pp_destdir$f
$_pp_solaris_smf_dependencies
$pp_solaris_smf_additional_dependencies
$description
.
}
pp_solaris_make_service_group () {
typeset group out file svcs svc
group="$1"
svcs="$2"
file="/etc/init.d/$group"
out="$pp_destdir$file"
#-- return if the script is supplied already
pp_add_file_if_missing "$file" run 755 || return 0
pp_solaris_add_parent_dirs "$file"
echo "#! /sbin/sh" > $out
echo "# polypkg service group script for these services:" >> $out
echo "svcs=\"$svcs\"" >> $out
cat <<'.' >>$out
#-- starts services in order.. stops them all if any break
pp_start () {
undo=
for svc in $svcs; do
if /etc/init.d/$svc start; then
undo="$svc $undo"
else
if test -n "$undo"; then
for svc in $undo; do
/etc/init.d/$svc stop
done
return 1
fi
fi
done
return 0
}
#-- stops services in reverse
pp_stop () {
reverse=
for svc in $svcs; do
reverse="$svc $reverse"
done
rc=0
for svc in $reverse; do
/etc/init.d/$svc stop || rc=$?
done
return $rc
}
#-- returns true only if all services return true status
pp_status () {
rc=0
for svc in $svcs; do
/etc/init.d/$svc status || rc=$?
done
return $rc
}
case "$1" in
start) pp_start;;
stop) pp_stop;;
status) pp_status;;
restart) pp_stop && pp_start;;
*) echo "usage: $0 {start|stop|restart|status}" >&2; exit 1;;
esac
.
}
pp_solaris_make_service () {
typeset file out _cmd svc
svc="${pp_solaris_smf_service_name:-$1}"
file=${pp_solaris_service_script:-"/etc/init.d/${pp_solaris_service_script_name:-$svc}"}
out="$pp_destdir$file"
#-- return if we don't need to create the init script
pp_add_file_if_missing "$file" run 755 ||
return 0
pp_solaris_add_parent_dirs "$file"
echo "#! /sbin/sh" >$out
echo "#-- This service init file generated by polypkg" >>$out
#-- Start SMF integration.
if [ -n "$pp_svc_xml_file" ] ; then
cat <<_EOF >>$out
if [ -x /usr/sbin/svcadm ] && [ "x\$1" != "xstatus" ] && [ "t\$$_smf_method_envvar_name" = "t" ] ; then
case "\$1" in
start)
echo "starting $svc"
/usr/sbin/svcadm clear svc:/$_smf_category/$svc:default >/dev/null 2>&1
/usr/sbin/svcadm enable -s $_smf_category/$svc
RESULT=\$?
if [ "\$RESULT" -ne 0 ] ; then
echo "Error \$RESULT starting $svc" >&2
fi
;;
stop)
echo "stopping $svc"
/usr/sbin/svcadm disable -ts $_smf_category/$svc
RESULT=0
;;
restart)
echo "restarting $svc"
/usr/sbin/svcadm disable -ts $_smf_category/$svc
/usr/sbin/svcadm clear svc:/$_smf_category/$svc:default >/dev/null 2>&1
/usr/sbin/svcadm enable -s $_smf_category/$svc
RESULT=\$?
if [ "\$RESULT" -ne 0 ] ; then
echo "Error \$RESULT starting $svc" >&2
fi
;;
*)
echo "Usage: $file {start|stop|restart|status}" >&2
RESULT=1
esac
exit $RESULT
fi
_EOF
fi
#-- construct a start command that builds a pid file as needed
# and forks the daemon
_cmd="$cmd";
if test -z "$pidfile"; then
# The service does not define a pidfile, so we have to make
# our own up. On Solaris systems where there is no /var/run
# we must use /tmp to guarantee the pid files are removed after
# a system crash.
cat <<. >>$out
pp_piddir="/var/run"
test -d "\$pp_piddir/." || pp_piddir="/tmp"
pidfile="\$pp_piddir/$svc.pid"
.
_cmd="$cmd & echo \$! > \$pidfile"
else
# The service is able to write its own PID file
cat <<. >>$out
pidfile="$pidfile"
.
fi
if test "${user:-root}" != "root"; then
_cmd="su $user -c exec $_cmd";
fi
cat <<. >>$out
stop_signal="${stop_signal:-TERM}"
svc="${svc}"
# generated command to run $svc as a daemon process
pp_exec () { $_cmd; }
.
#-- write the invariant section of the init script
cat <<'.' >>$out
# returns true if $svc is running
pp_running () {
test -s "$pidfile" || return 1
read pid junk < "$pidfile" 2>/dev/null
test ${pid:-0} -gt 1 &&
kill -0 "$pid" 2>/dev/null
}
# prints a message describing $svc's running state
pp_status () {
if pp_running; then
echo "service $svc is running (pid $pid)"
return 0
elif test -f "$pidfile"; then
echo "service $svc is not running, but pid file exists"
return 2
else
echo "service $svc is not running"
return 1
fi
}
# starts $svc
pp_start () {
if pp_running; then
echo "service $svc already running" >&2
return 0
fi
echo "starting $svc... \c"
if pp_exec; then
echo "done."
else
echo "ERROR."
exit 1
fi
}
# stops $svc
pp_stop () {
if pp_running; then
echo "stopping $svc... \c"
if kill -$stop_signal $pid; then
rm -f "$pidfile"
echo "done."
else
echo "ERROR."
return 1
fi
else
echo "service $svc already stopped" >&2
return 0
fi
}
umask 022
case "$1" in
start) pp_start;;
stop) pp_stop;;
status) pp_status;;
restart) pp_stop && pp_start;;
*) echo "usage: $0 {start|stop|restart|status}" >&2; exit 1;;
esac
.
}
pp_solaris_remove_service () {
typeset file svc
svc="${pp_solaris_smf_service_name:-$1}"
file=${pp_solaris_service_script:-"/etc/init.d/${pp_solaris_service_script_name:-$svc}"}
echo '
'$file' stop >/dev/null 2>/dev/null
if [ "x${PKG_INSTALL_ROOT}" = 'x' ]; then
if [ -x /usr/sbin/svcadm ] ; then
# Likely un-needed, but just in case.
/usr/sbin/svcadm disable -s '$svc' 2>/dev/null
/usr/sbin/svccfg delete '$svc' 2>/dev/null
fi
fi
'
}
pp_solaris_install_service () {
typeset s k l file svc
svc="${pp_solaris_smf_service_name:-$1}"
file=${pp_solaris_service_script:-"/etc/init.d/${pp_solaris_service_script_name:-$svc}"}
s="${solaris_sysv_init_start}$svc"
k="${solaris_sysv_init_kill}$svc"
echo '
if [ "x${PKG_INSTALL_ROOT}" != "x" ]; then
if [ -x ${PKG_INSTALL_ROOT}/usr/sbin/svcadm ]; then
echo "/usr/sbin/svccfg import '$pp_svc_xml_file' 2>/dev/null" >> ${PKG_INSTALL_ROOT}/var/svc/profile/upgrade
else'
test -n "${solaris_sysv_init_start_states}" &&
for state in ${solaris_sysv_init_start_states}; do
l="/etc/rc$state.d/$s"
echo "echo '$l'"
echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=$file s"
pp_solaris_space /etc/rc$state.d 0 1
done
test -n "${solaris_sysv_init_kill_states}" &&
for state in ${solaris_sysv_init_kill_states}; do
l="/etc/rc$state.d/$k"
echo "echo '$l'"
echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=$file s"
pp_solaris_space /etc/rc$state.d 0 1
done
echo '
fi
else
if [ -x /usr/sbin/svcadm ]; then
echo "Registering '$svc' with SMF"
/usr/sbin/svcadm disable -s '$svc' 2>/dev/null
/usr/sbin/svccfg delete '$svc' 2>/dev/null
/usr/sbin/svccfg import '$pp_svc_xml_file'
else'
test -n "${solaris_sysv_init_start_states}" &&
for state in ${solaris_sysv_init_start_states}; do
l="/etc/rc$state.d/$s"
echo "echo '$l'"
echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=$file s"
pp_solaris_space /etc/rc$state.d 0 1
done
test -n "${solaris_sysv_init_kill_states}" &&
for state in ${solaris_sysv_init_kill_states}; do
l="/etc/rc$state.d/$k"
echo "echo '$l'"
echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=$file s"
pp_solaris_space /etc/rc$state.d 0 1
done
echo '
fi
fi'
}
pp_solaris_add_parent_dirs () {
typeset dir
dir=${1%/*}
while test -n "$dir"; do
if awk "\$6 == \"$dir/\" {exit 1}" < $pp_wrkdir/%files.run; then
echo "d - - - - $dir/" >> $pp_wrkdir/%files.run
fi
dir=${dir%/*}
done
}
pp_platforms="$pp_platforms deb"
pp_backend_deb_detect () {
test -f /etc/debian_version
}
pp_deb_cmp_full_name () {
local prefix
prefix="${pp_deb_name:-$name}"
case "$1" in
run) echo "${prefix}" ;;
dbg) echo "${prefix}-${pp_deb_dbg_pkgname}";;
dev) echo "${prefix}-${pp_deb_dev_pkgname}";;
doc) echo "${prefix}-${pp_deb_doc_pkgname}";;
*) pp_error "unknown component '$1'";
esac
}
pp_backend_deb_init () {
pp_deb_dpkg_version="2.0"
pp_deb_name=
pp_deb_version=
pp_deb_release=
pp_deb_arch=
pp_deb_arch_std=
pp_deb_maintainer="Quest Software, Inc "
pp_deb_copyright=
pp_deb_distro=
pp_deb_control_description=
pp_deb_summary=
pp_deb_description=
pp_deb_dbg_pkgname="dbg"
pp_deb_dev_pkgname="dev"
pp_deb_doc_pkgname="doc"
pp_deb_section=contrib # Free software that depends on non-free software
# Detect the host architecture
pp_deb_detect_arch
# Make sure any programs we require are installed
pp_deb_check_required_programs
}
pp_deb_check_required_programs () {
local p needed notfound ok
needed= notfound=
for prog in dpkg dpkg-deb install md5sum fakeroot
do
if which $prog 2>/dev/null >/dev/null; then
pp_debug "$prog: found"
else
pp_debug "$prog: not found"
case "$prog" in
dpkg|dpkg-deb) p=dpkg;;
install|md5sum) p=coreutils;;
fakeroot) p=fakeroot;;
*) pp_die "unexpected dpkg tool $prog";;
esac
notfound="$notfound $prog"
pp_contains "$needed" "$p" || needed="$needed $p"
fi
done
if [ -n "$notfound" ]; then
pp_error "cannot find these programs: $notfound"
pp_error "please install these packages: $needed"
fi
}
pp_deb_munge_description () {
# Insert a leading space on each line, replace blank lines with a
#space followed by a full-stop.
pp_deb_control_description="`echo ${pp_deb_description:-$description} | \
sed 's,^\(.*\)$, \1, ' | sed 's,^[ \t]*$, .,g' | fmt -w 80`"
}
pp_deb_detect_arch () {
pp_deb_arch=`dpkg --print-architecture`
pp_deb_arch_std=`uname -m`
}
pp_deb_sanitize_version() {
echo "$@" | tr -d -c '[:alnum:].+-:~'
}
pp_deb_version_final() {
if test -n "$pp_deb_version"; then
# Don't sanitize; assume the user is sane (hah!)
echo "$pp_deb_version"
else
pp_deb_sanitize_version "$version"
fi
}
pp_deb_conflict () {
local _name _vers _conflicts
_conflicts="Conflicts:"
while read _name _vers; do
case "$_name" in ""| "#"*) continue ;; esac
_conflicts="$_conflicts $_name"
test -n "$_vers" && _conflicts="$_conflicts $_name (>= $vers)"
_conflicts="${_conflicts},"
done
echo "${_conflicts%,}"
}
pp_deb_make_control() {
local cmp="$1"
local installed_size
# compute the installed size
installed_size=`pp_deb_files_size < $pp_wrkdir/%files.$cmp`
package_name=`pp_deb_cmp_full_name "$cmp"`
cat <<-.
Package: ${package_name}
Version: `pp_deb_version_final`-${pp_deb_release:-1}
Section: ${pp_deb_section:-contrib}
Priority: optional
Architecture: ${pp_deb_arch}
Maintainer: ${pp_deb_maintainer:-$maintainer}
Description: ${pp_deb_summary:-$summary}
${pp_deb_control_description}
Installed-Size: ${installed_size}
.
if test -s $pp_wrkdir/%depend."$cmp"; then
sed -ne '/^[ ]*$/!s/^[ ]*/Depends: /p' \
< $pp_wrkdir/%depend."$cmp"
fi
if test -s $pp_wrkdir/%conflict."$cmp"; then
pp_deb_conflict < $pp_wrkdir/%conflict."$cmp"
fi
}
pp_deb_make_md5sums() {
local cmp="$1"; shift
local pkg_dir
pkg_dir=$pp_wrkdir/`pp_deb_cmp_full_name $cmp`
(cd $pkg_dir && md5sum "$@") > $pkg_dir/DEBIAN/md5sums ||
pp_error "cannot make md5sums"
}
pp_deb_make_package_maintainer_script() {
local output="$1"
local source="$2"
local desc="$3"
# See if we need to create this script at all
if [ -s "$source" ]
then
# Create header
cat <<-. >$output || pp_error "Cannot create $output"
#!/bin/sh
# $desc
# Generated by PolyPackage $pp_version
.
cat $source >> "$output" || pp_error "Cannot append to $output"
# Set perms
chmod 755 "$output" || pp_error "Cannot chmod $output"
fi
}
pp_deb_handle_services() {
local svc
#-- add service start/stop code
if test -n "$pp_services"; then
#-- record the uninstall commands in reverse order
for svc in $pp_services; do
pp_load_service_vars $svc
# Create init script (unless one exists)
pp_deb_service_make_init_script $svc
#-- append %post code to install the svc
test x"yes" = x"$enable" &&
cat<<-. >> $pp_wrkdir/%post.run
case "\$1" in
configure)
# Install the service links
update-rc.d $svc defaults
;;
esac
.
#-- prepend %preun code to stop svc
cat<<-. | pp_prepend $pp_wrkdir/%preun.run
case "\$1" in
remove|deconfigure|upgrade)
# Stop the $svc service
invoke-rc.d $svc stop
;;
esac
.
#-- prepend %postun code to remove service
cat<<-. | pp_prepend $pp_wrkdir/%postun.run
case "\$1" in
purge)
# Remove the service links
update-rc.d $svc remove
;;
esac
.
done
#pp_deb_service_remove_common | pp_prepend $pp_wrkdir/%preun.run
fi
}
pp_deb_fakeroot () {
if test -s $pp_wrkdir/fakeroot.save; then
fakeroot -i $pp_wrkdir/fakeroot.save -s $pp_wrkdir/fakeroot.save "$@"
else
fakeroot -s $pp_wrkdir/fakeroot.save "$@"
fi
}
pp_deb_files_size () {
local t m o g f p st
while read t m o g f p st; do
case $t in
f|s) du -k "${pp_destdir}$p";;
d) echo 4;;
esac
done | awk '{n+=$1} END {print n}'
}
pp_deb_make_DEBIAN() {
local cmp="${1:-run}"
local data cmp_full_name
local old_umask
old_umask=`umask`
umask 0022
cmp_full_name=`pp_deb_cmp_full_name $cmp`
data=$pp_wrkdir/$cmp_full_name
# Create DEBIAN dir $data/DEBIAN
mkdir -p $data/DEBIAN
# Create control file
pp_deb_make_control $cmp > $data/DEBIAN/control
# Copy in conffiles
if test -f $pp_wrkdir/%conffiles.$cmp; then
cp $pp_wrkdir/%conffiles.$cmp $data/DEBIAN/conffiles
fi
# Create preinst
pp_deb_make_package_maintainer_script "$data/DEBIAN/preinst" \
"$pp_wrkdir/%pre.$cmp" "Pre-install script for $cmp_full_name"\
|| exit $?
# Create postinst
pp_deb_make_package_maintainer_script "$data/DEBIAN/postinst" \
"$pp_wrkdir/%post.$cmp" "Post-install script for $cmp_full_name"\
|| exit $?
# Create prerm
pp_deb_make_package_maintainer_script "$data/DEBIAN/prerm" \
"$pp_wrkdir/%preun.$cmp" "Pre-uninstall script for $cmp_full_name"\
|| exit $?
# Create postrm
pp_deb_make_package_maintainer_script "$data/DEBIAN/postrm" \
"$pp_wrkdir/%postun.$cmp" "Post-uninstall script for $cmp_full_name"\
|| exit $?
umask $old_umask
}
pp_deb_make_data() {
local _l t m o g f p st data
local data share_doc owner group
cmp=$1
data=$pp_wrkdir/`pp_deb_cmp_full_name $cmp`
cat $pp_wrkdir/%files.${cmp} | while read t m o g f p st; do
if test x"$m" = x"-"; then
case "$t" in
d) m=755;;
f) m=644;;
esac
fi
test x"$o" = x"-" && o=root
test x"$g" = x"-" && g=root
case "$t" in
f) # Files
pp_deb_fakeroot install -D -o $o -g $g -m ${m} $pp_destdir/$p $data/$p;
if [ x"$f" = x"v" ]
then
# File marked as "volatile". Assume this means it's a conffile
# TODO: check this as admins like modified conffiles to be left
# behind
echo "$p" >> $pp_wrkdir/%conffiles.$cmp
fi;;
d) # Directories
pp_deb_fakeroot install -m ${m} -o $o -g $g -d $data/$p;;
s) # Symlinks
# Remove leading / from vars
rel_p=`echo $p | sed s,^/,,`
rel_st=`echo $st | sed s,^/,,`
# TODO: we are always doing absolute links here. We should follow
# the debian policy of relative links when in the same top-level
# directory
(cd $data; ln -sf $st $rel_p);;
*) pp_error "Unsupported data file type: $t";;
esac
done
# If no copyright file is present add one. This is a debian requirement.
share_doc="/usr/share/doc/`pp_deb_cmp_full_name $cmp`"
if [ ! -f "$data/$share_doc/copyright" ]
then
echo "${pp_deb_copyright:-$copyright}" > "$pp_wrkdir/copyright"
install -D -m 644 "$pp_wrkdir/copyright" "$data/$share_doc/copyright"
fi
}
pp_deb_makedeb () {
local cmp
local package_build_dir
cmp="$1"
package_build_dir=$pp_wrkdir/`pp_deb_cmp_full_name $cmp`
# Create package dir
mkdir -p $package_build_dir
# Copy in data
pp_deb_make_data $cmp ||
pp_die "Could not make DEBIAN data files for $cmp"
# Make control files
# must be done after copying data so conffiles are found
pp_deb_make_DEBIAN $cmp ||
pp_die "Could not make DEBIAN control files for $cmp"
# Create md5sums
pp_deb_make_md5sums $cmp `(cd $package_build_dir;
find . -name DEBIAN -prune -o -type f -print | sed "s,^\./,,")` ||
pp_die "Could not make DEBIAN md5sums for $cmp"
}
pp_backend_deb () {
local debname
# Munge description for control file inclusion
pp_deb_munge_description
# Handle services
pp_deb_handle_services $cmp
for cmp in $pp_components
do
debname=`pp_deb_name $cmp`
pp_deb_makedeb $cmp
done
. $pp_wrkdir/%fixup
for cmp in $pp_components
do
debname=`pp_deb_name $cmp`
# Create debian package
pp_debug "Building `pp_deb_cmp_full_name $cmp` -> $output"
pp_deb_fakeroot dpkg-deb \
--build $pp_wrkdir/`pp_deb_cmp_full_name $cmp` \
$pp_wrkdir/$debname ||
pp_error "failed to create $cmp package"
done
}
pp_backend_deb_cleanup () {
# rm -rf $pp_wrkdir
:
}
pp_deb_name () {
local cmp="${1:-run}"
echo `pp_deb_cmp_full_name $cmp`"_"`pp_deb_version_final`"-${pp_deb_release:-1}_${pp_deb_arch}.deb"
}
pp_backend_deb_names () {
for cmp in $pp_components
do
pp_deb_name $cmp
done
}
pp_backend_deb_install_script () {
local cmp _cmp_full_name
echo "#!/bin/sh"
pp_install_script_common
cat <<.
cmp_to_pkgname () {
test x"\$*" = x"all" &&
set -- $pp_components
for cmp
do
case \$cmp in
.
for cmp in $pp_components; do
echo "$cmp) echo '`pp_deb_cmp_full_name $cmp`';;"
done
cat <<.
*) usage;;
esac
done
}
cmp_to_pathname () {
test x"\$*" = x"all" &&
set -- $pp_components
for cmp
do
case \$cmp in
.
for cmp in $pp_components; do
echo "$cmp) echo \${PP_PKGDESTDIR:-.}/'`pp_deb_name $cmp`';;"
done
cat <<.
*) usage;;
esac
done
}
test \$# -eq 0 && usage
op="\$1"; shift
case "\$op" in
list-components)
test \$# -eq 0 || usage \$op
echo $pp_components
;;
list-services)
test \$# -eq 0 || usage \$op
echo $pp_services
;;
list-files)
test \$# -ge 1 || usage \$op
cmp_to_pathname "\$@"
;;
install)
test \$# -ge 1 || usage \$op
dpkg --install \`cmp_to_pathname "\$@"\`
;;
uninstall)
test \$# -ge 1 || usage \$op
dpkg --remove \`cmp_to_pkgname "\$@"\`; :
;;
start|stop)
test \$# -ge 1 || usage \$op
ec=0
for svc
do
/etc/init.d/\$svc \$op || ec=1
done
exit \$ec
;;
print-platform)
test \$# -eq 0 || usage \$op
echo "linux-${pp_deb_arch}"
;;
*)
usage
;;
esac
.
}
pp_backend_deb_probe() {
local arch distro release
pp_deb_detect_arch
# /etc/debian_version exists on Debian & Ubuntu, so it's no use
# to us. Use lsb_release instead.
case `(lsb_release -is || echo no-lsb) 2>/dev/null` in
Debian)
distro=deb
;;
Ubuntu)
distro=ubu
;;
no-lsb)
echo unknown-$pp_deb_arch_std
return 0
;;
*)
distro=unknown
;;
esac
release=`lsb_release -rs`
# If release is not numeric, use the codename
case $release in
*[!.0-9r]*)
release=`lsb_release -cs`
case $release in
buzz)
release="11"
;;
rex)
release="12"
;;
bo)
release="13"
;;
hamm)
release="20"
;;
slink)
release="21"
;;
potato)
release="22"
;;
woody)
release="30"
;;
sarge)
release="31"
;;
etch)
release="40"
;;
lenny)
release="50"
;;
squeeze)
release="60"
;;
esac
;;
*)
# Remove trailing revision number and any dots
release=`echo $release | cut -dr -f1 | tr -d .`
;;
esac
echo $distro$release-$pp_deb_arch_std
}
pp_backend_deb_vas_platforms () {
case "$pp_deb_arch_std" in
x86_64) echo "linux-x86_64.deb";; # DO NOT add linux-x86.deb here!!
*86) echo "linux-x86.deb";;
*) pp_die "unknown architecture ${pp_deb_arch_std}";;
esac
}
pp_backend_deb_init_svc_vars () {
reload_signal=
start_runlevels=${pp_deb_default_start_runlevels-"2 3 4 5"} # == lsb default-start
stop_runlevels=${pp_deb_default_stop_runlevels-"0 1 6"} # == lsb default-stop
svc_description="${pp_deb_default_svc_description}" # == lsb short descr
svc_process=
lsb_required_start='$local_fs $network'
lsb_should_start=
lsb_required_stop='$local_fs'
lsb_description=
start_priority=50
stop_priority=50 #-- stop_priority = 100 - start_priority
}
pp_deb_service_make_init_script () {
local svc=$1
local script=/etc/init.d/$svc
local out=$pp_destdir$script
local _process _cmd
pp_add_file_if_missing $script run 755 v || return 0
#-- start out as an empty shell script
cat <<-'.' >$out
#!/bin/sh
.
#-- determine the process name from $cmd unless $svc_process is given
set -- $cmd
#_process=${svc_process:-"$1"} --? WTF
#-- construct a start command that builds a pid file if needed
#-- the command name in /proc/[pid]/stat is limited to 15 characters
_cmd="$cmd";
_cmd_path=`echo $cmd | cut -d" " -f1`
_cmd_name=`basename $_cmd_path | cut -c1-15`
_cmd_args=`echo $cmd | cut -d" " -f2-`
test x"$_cmd_path" != x"$_cmd_args" || _cmd_args=
#-- generate the LSB init info
cat <<-. >>$out
### BEGIN INIT INFO
# Provides: ${svc}
# Required-Start: ${lsb_required_start}
# Should-Start: ${lsb_should_start}
# Required-Stop: ${lsb_required_stop}
# Default-Start: ${start_runlevels}
# Default-Stop: ${stop_runlevels}
# Short-Description: ${svc_description:-no description}
### END INIT INFO
# Generated by PolyPackage ${pp_version}
# ${copyright}
.
if test x"${svc_description}" = x"${pp_deb_default_svc_description}"; then
svc_description=
fi
#-- write service-specific definitions
cat <<. >>$out
NAME="${_cmd_name}"
DESC="${svc_description:-$svc service}"
USER="${user}"
GROUP="${group}"
PIDFILE="${pidfile}"
STOP_SIGNAL="${stop_signal}"
RELOAD_SIGNAL="${reload_signal}"
CMD="${_cmd}"
DAEMON="${_cmd_path}"
DAEMON_ARGS="${_cmd_args}"
SCRIPTNAME=${script}
.
#-- write the generic part of the init script
cat <<'.' >>$out
[ -x "$DAEMON" ] || exit 0
[ -r /etc/default/$NAME ] && . /etc/default/$NAME
[ -f /etc/default/rcS ] && . /etc/default/rcS
. /lib/lsb/init-functions
do_start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
if [ -n "$PIDFILE" ]
then
pidfile_opt="--pidfile $PIDFILE"
else
pidfile_opt="--make-pidfile --background --pidfile /var/run/$NAME.pid"
fi
if [ -n "$USER" ]
then
user_opt="--user $USER"
fi
if [ -n "$GROUP" ]
then
group_opt="--group $GROUP"
fi
start-stop-daemon --start --quiet $pidfile_opt $user_opt --exec $DAEMON --test > /dev/null \
|| return 1
# Note: there seems to be no way to tell whether the daemon will fork itself or not, so pass
# --background for now
start-stop-daemon --start --quiet $pidfile_opt $user_opt --exec $DAEMON -- \
$DAEMON_ARGS \
|| return 2
}
do_stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
if [ -n "$PIDFILE" ]
then
pidfile_opt="--pidfile $PIDFILE"
else
pidfile_opt="--pidfile /var/run/$NAME.pid"
fi
if [ -n "$USER" ]
then
user_opt="--user $USER"
fi
if [ -n $STOP_SIGNAL ]
then
signal_opt="--signal $STOP_SIGNAL"
fi
start-stop-daemon --stop --quiet $signal_opt --retry=TERM/30/KILL/5 $pidfile_opt --name $NAME
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
# Wait for children to finish too if this is a daemon that forks
# and if the daemon is only ever run from this initscript.
# If the above conditions are not satisfied then add some other code
# that waits for the process to drop all resources that could be
# needed by services started subsequently. A last resort is to
# sleep for some time.
start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
[ "$?" = 2 ] && return 2
# Many daemons don't delete their pidfiles when they exit.
test -z $PIDFILE || rm -f $PIDFILE
return "$RETVAL"
}
do_reload() {
#
# If the daemon can reload its configuration without
# restarting (for example, when it is sent a SIGHUP),
# then implement that here.
#
if [ -n "$PIDFILE" ]
then
pidfile_opt="--pidfile $PIDFILE"
else
pidfile_opt="--pidfile /var/run/$NAME.pid"
fi
if [ -n "$RELOAD_SIGNAL" ]
then
start-stop-daemon --stop --signal $RELOAD_SIGNAL --quiet $pidfile_opt --name $NAME
fi
return 0
}
case "$1" in
start)
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
do_start
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
stop)
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
do_stop
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
reload|force-reload)
if [ -n "$RELOAD_SIGNAL" ]
then
log_daemon_msg "Reloading $DESC" "$NAME"
do_reload
log_end_msg $?
else
# Do a restart instead
"$0" restart
fi
;;
restart)
#
# If the "reload" option is implemented then remove the
# 'force-reload' alias
#
log_daemon_msg "Restarting $DESC" "$NAME"
do_stop
case "$?" in
0|1)
do_start
case "$?" in
0) log_end_msg 0 ;;
1) log_end_msg 1 ;; # Old process is still running
*) log_end_msg 1 ;; # Failed to start
esac
;;
*)
# Failed to stop
log_end_msg 1
;;
esac
;;
*)
#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 3
;;
esac
:
.
chmod 755 $out
}
pp_backend_deb_function() {
case "$1" in
pp_mkgroup) cat<<'.';;
/usr/sbin/groupmod "$1" 2>/dev/null && return 0
/usr/sbin/groupadd "$1"
.
pp_mkuser:depends) echo pp_mkgroup;;
pp_mkuser) cat<<'.';;
pp_tmp_system=
id -u "$1" >/dev/null 2>/dev/null && return 0
# deb 3.1's useradd changed API in 4.0. Gah!
/usr/sbin/useradd --help 2>&1 | /bin/grep -q .--system &&
pp_tmp_system=--system
pp_mkgroup "${2:-$1}" || return 1
/usr/sbin/useradd \
-g "${2:-$1}" \
-d "${3:-/nonexistent}" \
-s "${4:-/bin/false}" \
$pp_tmp_system \
"$1"
.
pp_havelib) cat<<'.';;
for pp_tmp_dir in `echo "/usr/lib:/lib${3:+:$3}" | tr : ' '`; do
test -r "$pp_tmp_dir/lib$1.so{$2:+.$2}" && return 0
done
return 1
.
*) false;;
esac
}
pp_platforms="$pp_platforms kit"
pp_backend_kit_detect () {
test x"$1" = x"OSF1"
}
pp_backend_kit_init () {
pp_kit_name=
pp_kit_package=
pp_kit_desc=
pp_kit_version=
pp_kit_subset=
pp_readlink_fn=pp_ls_readlink
pp_kit_startlevels="2 3"
pp_kit_stoplevels="0 2 3"
}
pp_backend_kit () {
typeset mi_file k_file svc outfile
typeset desc
pp_backend_kit_names > /dev/null
if test -z "$pp_kit_desc"; then
pp_kit_desc="$description"
fi
mi_file="$pp_wrkdir/$pp_kit_subset.mi"
k_file="$pp_wrkdir/$pp_kit_subset.k"
scp_file="$pp_wrkdir/$pp_kit_subset.scp"
desc="${pp_kit_desc:-$description}"
cat <<-. >> $k_file
NAME='$name'
CODE=$pp_kit_name
VERS=$pp_kit_version
MI=$mi_file
COMPRESS=0
%%
$pp_kit_subset . 0 '$desc'
.
if test -n "$pp_services"; then
for svc in $pp_services; do
pp_kit_make_service $svc
pp_prepend $pp_wrkdir/%preun.run <<-.
/sbin/init.d/$svc stop
.
done
fi
pp_backend_kit_make_mi "$mi_file"
pp_backend_kit_make_scp
#rm -rf $pp_wrkdir/kit_dest
mkdir -p $pp_wrkdir/kit_dest
pp_backend_kit_kits $k_file $pp_opt_destdir $pp_wrkdir/kit_dest
tar cvf $pp_wrkdir/$pp_kit_subset.tar -C $pp_wrkdir/kit_dest .
gzip -c $pp_wrkdir/$pp_kit_subset.tar > $pp_wrkdir/$pp_kit_subset.tar.gz
#rm -rf $pp_wrkdir/$pp_kit_subset.tar $pp_wrkdir/scps
}
pp_backend_kit_make_mi () {
# XXX this information should go into the .inv files
typeset t m o g f p st line dm
while read t m o g f p st; do
case $t in
f|d)
echo "0 .$p $pp_kit_subset"
echo " chmod $m $p" >> $pp_wrkdir/%post.run
if [ x"$o" = x"-" ] ; then
echo " chown root $p" >> $pp_wrkdir/%post.run
else
echo " chown $o $p" >> $pp_wrkdir/%post.run
fi
if [ x"$g" = x"-" ] ; then
echo " chgrp 0 $p" >> $pp_wrkdir/%post.run
else
echo " chgrp $g $p" >> $pp_wrkdir/%post.run
fi
;;
s)
echo " ln -s $st $p" >> $pp_wrkdir/%post.run
echo " rm -f $p" >> $pp_wrkdir/%preun.run
;;
esac
done < $pp_wrkdir/%files.run | sort -k3 |uniq > $1
}
pp_backend_kit_make_scp () {
scpdir="$pp_wrkdir/scps"
mkdir "$scpdir" && touch "$scpdir"/$pp_kit_subset.scp
cat <"$scpdir"/$pp_kit_subset.scp
. /usr/share/lib/shell/libscp
case "\$ACT" in
PRE_L)
STL_ScpInit
;;
POST_L)
STL_ScpInit
STL_LinkCreate
EOF
cat $pp_wrkdir/%post.run >>"$scpdir"/$pp_kit_subset.scp
cat >>"$scpdir"/$pp_kit_subset.scp <>"$scpdir"/$pp_kit_subset.scp
cat >>"$scpdir"/$pp_kit_subset.scp </dev/null ||
/usr/sbin/groupadd $1
.
pp_mkuser) cat <<'.';;
eval user=\$$#
grep "^$user:" /etc/passwd >/dev/null ||
/usr/sbin/useradd -s /usr/bin/false "$@"
.
pp_havelib) cat <<'.';;
for dir in `echo /usr/lib${3+:$3} | tr : ' '`; do
test -r "$dir/lib$1.${2-sl}" && return 0
done
return 1
.
*) pp_error "unknown function request: $1";;
esac
}
pp_backend_kit_init_svc_vars () {
:
}
pp_backend_kit_probe () {
echo tru64-`uname -r | sed 's/V\([0-9]*\)\.\([0-9]*\)/\1\2/'`
}
pp_kit_service_group_script () {
typeset grp svcs scriptpath out
grp="$1"
svcs="$2"
scriptpath="/sbin/init.d/$grp"
out="$pp_destdir$scriptpath"
pp_add_file_if_missing $scriptpath run 755 || return 0
cat <<-. > $out
#!/sbin/sh
# generated by pp $pp_version
svcs="$svcs"
.
cat <<-'.' >> $out
#-- starts services in order.. stops them all if any break
pp_start () {
undo=
for svc in $svcs; do
/sbin/init.d/$svc start
case $? in
0|4)
undo="$svc $undo"
;;
*)
if test -n "$undo"; then
for svc in $undo; do
/sbin/init.d/$svc stop
done
return 1
fi
;;
esac
done
return 0
}
#-- stops services in reverse
pp_stop () {
reverse=
for svc in $svcs; do
reverse="$svc $reverse"
done
rc=0
for svc in $reverse; do
/sbin/init.d/$svc stop || rc=$?
done
return $rc
}
case "$1" in
start_msg) echo "Starting $svcs";;
stop_msg) echo "Stopping $svcs";;
start) pp_start;;
stop) pp_stop;;
*) echo "usage: $0 {start|stop|start_msg|stop_msg}"
exit 1;;
esac
.
}
pp_kit_service_script () {
typeset svc scriptpath out
svc="$1"
scriptpath="/sbin/init.d/$svc"
pp_load_service_vars "$svc"
test -n "$user" -a x"$user" != x"root" &&
cmd="SHELL=/usr/bin/sh /usr/bin/su $user -c \"exec `echo $cmd | sed -e 's,[$\\\`],\\&,g'`\""
if test -z "$pidfile"; then
pidfile="/var/run/$svc.pid"
cmd="$cmd & echo \$! > \$pidfile"
fi
pp_add_file_if_missing $scriptpath run 755
cat <<-. > $pp_destdir$scriptpath
svc="$svc"
pidfile="$pidfile"
pp_start () {
$cmd
}
.
cat <<-'.' >>$pp_destdir$scriptpath
pp_stop () {
if test ! -s "$pidfile"; then
echo "Unable to stop $svc (no pid file)"
return 1
else
read pid < "$pidfile"
if kill -0 "$pid" 2>/dev/null; then
if kill -${stop_signal:-TERM} "$pid"; then
rm -f "$pidfile"
return 0
else
echo "Unable to stop $svc"
return 1
fi
else
rm -f "$pidfile"
return 0
fi
fi
}
pp_running () {
if test ! -s "$pidfile"; then
return 1
else
read pid < "$pidfile"
kill -0 "$pid" 2>/dev/null
fi
}
case "$1" in
start_msg) echo "Starting the $svc service";;
stop_msg) echo "Stopping the $svc service";;
start)
if pp_running; then
echo "$svc already running";
exit 0
elif pp_start; then
echo "$svc started";
# rc(1M) says we should exit 4, but nobody expects it!
exit 0
else
exit 1
fi
;;
stop)
if pp_stop; then
echo "$svc stopped";
exit 0
else
exit 1
fi
;;
*) echo "usage: $0 {start|stop|start_msg|stop_msg}"
exit 1
;;
esac
.
}
pp_kit_make_service () {
typeset level priority startlevels stoplevels
typeset svc svcvar
svc="$1"
svcvar=`pp_makevar $svc`
#-- don't do anything if the script exists
if test -s "$pp_destdir/sbin/init.d/$svc"; then
pp_error "$pp_destdir/sbin/init.d/$svc exists"
return
fi
# symlink the script, depending on the priorities chosen
eval priority='${pp_kit_priority_'$svcvar'}'
test -z "$priority" && priority="${pp_kit_priority:-50}"
eval startlevels='${pp_kit_startlevels_'$svcvar'}'
test -z "$startlevels" && startlevels="$pp_kit_startlevels"
eval stoplevels='${pp_kit_stoplevels_'$svcvar'}'
test -z "$stoplevels" && stoplevels="$pp_kit_stoplevels"
# create the script and config file
pp_kit_service_script $svc
# fix the priority up
case "$priority" in
???) :;;
??) priority=0$priority;;
?) priority=00$priority;;
esac
if test x"$stoplevels" = x"auto"; then
stoplevels=
test -z "$startlevels" || for level in $startlevels; do
stoplevels="$stoplevels `expr $level - 1`"
done
fi
# create the symlinks
test -z "$startlevels" || for level in $startlevels; do
echo " ln -s /sbin/init.d/$svc /sbin/rc$level.d/S$priority$svc" >>$pp_wrkdir/%post.run
echo " rm /sbin/rc$level.d/S$priority$svc" >>$pp_wrkdir/%preun.run
done
test -z "$stoplevels" || for level in $stoplevels; do
echo " ln -s /sbin/init.d/$svc /sbin/rc$level.d/K$priority$svc" >>$pp_wrkdir/%post.run
echo " rm -f /sbin/rc$level.d/K$priority$svc" >>$pp_wrkdir/%preun.run
done
}
pp_backend_kit_sizes () {
awk '
BEGIN { root = usr = var = 0; }
{
if (substr($9, 1, 1) != "l")
if (substr($10, 1, 6) == "./var/")
var += $2;
else if (substr($10, 1, 10) == "./usr/var/")
var += $2
else if (substr($10, 1, 6) == "./usr/")
usr += $2
else
root += $2
}
END { printf "%d\t%d\t%d", root, usr, var }
' "$@"
}
pp_kit_kits_global () {
line=`sed -n '/^%%/q;/^'$2'=/{s/^'$2'=//p;q;}' <"$1"`
test -z "$line" && return 1
eval "echo $line"
:
}
pp_backend_kit_kits () {
typeset KITFILE FROMDIR TODIR
typeset SCPDIR
SCPDIR="$pp_wrkdir/scps"
PATH="/usr/lbin:/usr/bin:/etc:/usr/ucb:$PATH"; export PATH # XXX
#umask 2 # XXX
test $# -ge 3 || pp_die "pp_backend_kit_kits: too few arguments"
KITFILE="$1"; shift
FROMDIR="$1"; shift
TODIR="$1"; shift
test -f "$KITFILE" || pp_die "$KITFILE not found"
test -d "$FROMDIR" || pp_die "$FROMDIR not found"
test -d "$TODIR" || pp_die "$TODIR not found"
INSTCTRL="$TODIR/instctrl"
mkdir -p "$INSTCTRL" || pp_die "cannot create instctrl directory"
chmod 775 "$INSTCTRL"
grep "%%" $KITFILE > /dev/null || pp_die "no %% in $KITFILE"
typeset NAME CODE VERS MI ROOT COMPRESS
typeset S_LIST ALLSUBS
NAME=`pp_kit_kits_global "$KITFILE" NAME` || pp_die "no NAME in $KITFILE"
CODE=`pp_kit_kits_global "$KITFILE" CODE` || pp_die "no CODE in $KITFILE"
VERS=`pp_kit_kits_global "$KITFILE" VERS` || pp_die "no VERS in $KITFILE"
MI=`pp_kit_kits_global "$KITFILE" MI` || pp_die "no MI in $KITFILE"
ROOT=`pp_kit_kits_global "$KITFILE" ROOT`
COMPRESS=`pp_kit_kits_global "$KITFILE" COMPRESS`
test -f "$MI" || pp_die "Inventory file $MI not found"
case "$ROOT" in
*ROOT)
test -f "$TODIR/$ROOT" ||
pp_die "Root image $ROOT not found in $TODIR" ;;
esac
ALLSUBS=`awk 'insub==1 {print $1} /^%%/ {insub=1}' <"$KITFILE"`
test $# -eq 0 && set -- $ALLSUBS
pp_debug "Creating $# $NAME subsets."
pp_debug "ALLSUBS=<$ALLSUBS>"
if test x"$COMPRESS" = x"1"; then
COMPRESS=:
else
COMPRESS=false
fi
#rm -f *.ctrl Volume*
for SUB
do
test -z "$SUB" && pp_die "SUB is empty"
typeset INV CTRL ROOTSIZE USRSIZE VARSIZE TSSUB
#rm -f Volume*
case $SUB in
.*) :;;
*) pp_verbose rm -f "$TODIR/$SUB"* "$INSTCTRL/$SUB"*;;
esac
TSSUB="$pp_wrkdir/ts.$SUB"
pp_debug "kits: Subset $SUB"
INV="$SUB.inv"
CTRL="$SUB.ctrl"
pp_debug "kits: Generating media creation information..."
# Invcutter takes as input
# SUB dir/path
# and generates stl_inv(4) files, like this
# f 0 00000 0 0 100644 2/11/09 010 f dir/path none SUB
grep " $SUB\$" "$MI" |
pp_verbose /usr/lbin/invcutter \
-v "$VERS" -f "$FROMDIR" > "$INSTCTRL/$INV" ||
pp_die "failed to create $INSTCTRL/$INV"
chmod 664 "$INSTCTRL/$INV"
pp_backend_kit_sizes "$INSTCTRL/$INV" > "$pp_wrkdir/kit.sizes"
read ROOTSIZE USRSIZE VARSIZE < "$pp_wrkdir/kit.sizes"
# Prefix each line with $FROMDIR. This will be stripped
awk '$1 != "d" {print from $10}' from="$FROMDIR/" \
> "$TSSUB" < "$INSTCTRL/$INV" ||
pp_die "failed"
NVOLS=0
pp_debug "kits: Creating $SUB control file..."
sed '1,/^%%/d;/^'"$SUB"'/{p;q;}' < "$KITFILE" > "$pp_wrkdir/kit.line"
read _SUB _IGNOR DEPS FLAGS DESC < "$pp_wrkdir/kit.line"
if test -z "$_SUB"; then
pp_warn "No such subset $SUB in $KITFILE"
continue
fi
DEPS=`echo $DEPS | tr '|' ' '`
case $FLAGS in
FLGEXP*) pp_verbose FLAGS='"${'"$FLAGS"'}"' ;;
esac
case $DESC in
*%*) DESC=`echo $DESC|awk -F% '{printf "%-36s%%%s\n", $1, $2}'`;;
esac
cat > "$INSTCTRL/$CTRL" <<-.
NAME='$NAME $SUB'
DESC=$DESC
ROOTSIZE=$ROOTSIZE
USRSIZE=$USRSIZE
VARSIZE=$VARSIZE
NVOLS=1:$NVOLS
MTLOC=1:$TLOC
DEPS="$DEPS"
FLAGS=$FLAGS
.
chmod 664 "$INSTCTRL/$CTRL"
pp_debug "kits: Making tar image"
pp_verbose tar cfPR "$TODIR/$SUB" "$FROMDIR/" "$TSSUB" ||
pp_error "problem creating kit file"
if $COMPRESS; then
pp_debug "kits: Compressing"
(cd "$TODIR" && compress -f -v "$SUB") ||
pp_die "problem compressing $TODIR/$SUB"
SPC=`expr $SUB : '\(...\).*'` # first three characters
SVC=`expr $SUB : '.*\(...\)'` # last three characters
: > "$INSTCTRL/$SPC$SVC.comp"
chmod 664 "$INSTCTRL/$SPC$SVC.comp"
pp_debug "kits: Padding compressed file to 10kB" # wtf?
rm -f "$TODIR/$SUB"
pp_verbose \
dd if="$TODIR/$SUB.Z" of="$TODIR/$SUB" bs=10k conv=sync ||
pp_die "problem moving compressed file"
rm -f "$TODIR/$SUB.Z"
fi
chmod 664 "$TODIR/$SUB"
if test -f "$SCPDIR/$SUB.scp"; then
cp "$SCPDIR/$SUB.scp" "$INSTCTRL/$SUB.scp"
chmod 755 "$INSTCTRL/$SUB.scp"
else
pp_debug "kits: null subset control program for $SUB"
: > "$INSTCTRL/$SUB.scp"
chmod 744 "$INSTCTRL/$SUB.scp"
fi
pp_debug "kits: Finished creating media image for $SUB"
done
pp_debug "kits: Creating $CODE.image"
case "$ROOT" in
*ROOT) ALLSUBS="$ROOT $ALLSUBS"
;;
esac
(cd "$TODIR" && sum $ALLSUBS) > "$INSTCTRL/$CODE.image"
chmod 664 "$INSTTRL/$CODE.image"
pp_debug "kits: Creating INSTCTRL"
(cd "$INSTCTRL" && tar cpvf - *) > "$TODIR/INSTCTRL"
chmod 664 "$TODIR/INSTCTRL"
cp "$INSTCTRL/$CODE.image" "$TODIR/$CODE.image"
chmod 664 "$TODIR/$CODE.image"
pp_debug "kits: Media image production complete"
}
pp_platforms="$pp_platforms rpm"
pp_backend_rpm_detect () {
test x"$1" = x"Linux" -a ! -f /etc/debian_version
}
pp_backend_rpm_init () {
pp_rpm_version=
pp_rpm_summary=
pp_rpm_description=
pp_rpm_group="Applications/Internet"
pp_rpm_license="Unspecified"
pp_rpm_vendor=
pp_rpm_url=
pp_rpm_packager=
pp_rpm_provides=
pp_rpm_requires=
pp_rpm_release=
pp_rpm_epoch=
pp_rpm_dev_group="Development/Libraries"
pp_rpm_dbg_group="Development/Tools"
pp_rpm_doc_group="Documentation"
pp_rpm_dev_description=
pp_rpm_dbg_description=
pp_rpm_doc_description=
pp_rpm_dev_requires=
pp_rpm_dbg_requires=
pp_rpm_doc_requires=
pp_rpm_dev_provides=
pp_rpm_dbg_provides=
pp_rpm_doc_provides=
pp_rpm_dbg_pkgname=debug
pp_rpm_dev_pkgname=devel
pp_rpm_doc_pkgname=doc
pp_rpm_defattr_uid=root
pp_rpm_defattr_gid=root
pp_rpm_detect_arch
pp_rpm_detect_distro
pp_rpm_rpmbuild=`pp_rpm_detect_rpmbuild`
# SLES8 doesn't always come with readlink
test -x /usr/bin/readlink -o -x /bin/readlink ||
pp_readlink_fn=pp_ls_readlink
}
pp_rpm_detect_arch () {
pp_rpm_arch=auto
#-- Find the default native architecture that RPM is configured to use
cat <<-. >$pp_wrkdir/dummy.spec
Name: dummy
Version: 1
Release: 1
Summary: dummy
Group: ${pp_rpm_group}
License: ${pp_rpm_license}
%description
dummy
.
$pp_opt_debug && cat $pp_wrkdir/dummy.spec
pp_rpm_arch_local=`rpm -q --qf '%{arch}\n' --specfile $pp_wrkdir/dummy.spec`
rm $pp_wrkdir/dummy.spec
#-- Ask the kernel what machine architecture is in use
local arch
for arch in "`uname -m`" "`uname -p`"; do
case "$arch" in
i?86)
pp_rpm_arch_std=i386
break
;;
x86_64|ppc|ppc64|ia64|s390|s390x)
pp_rpm_arch_std="$arch"
break
;;
powerpc)
# Probably AIX
case "`/usr/sbin/lsattr -El proc0 -a type -F value`" in
PowerPC_POWER*) pp_rpm_arch_std=ppc64;;
*) pp_rpm_arch_std=ppc;;
esac
break
;;
*) pp_rpm_arch_std=unknown
;;
esac
done
#-- Later on, when files are processed, we use 'file' to determine
# what platform ABIs are used. This is used when pp_rpm_arch == auto
pp_rpm_arch_seen=
}
pp_rpm_detect_distro () {
pp_rpm_distro=
if test -f /etc/whitebox-release; then
pp_rpm_distro=`awk '
/^White Box Enterprise Linux release/ { print "wbel" $6; exit; }
' /etc/whitebox-release`
elif test -f /etc/mandrakelinux-release; then
pp_rpm_distro=`awk '
/^Mandrakelinux release/ { print "mand" $3; exit; }
' /etc/mandrake-release`
elif test -f /etc/mandrake-release; then
pp_rpm_distro=`awk '
/^Linux Mandrake release/ { print "mand" $4; exit; }
/^Mandrake Linux release/ { print "mand" $4; exit; }
' /etc/mandrake-release`
elif test -f /etc/fedora-release; then
pp_rpm_distro=`awk '
/^Fedora Core release/ { print "fc" $4; exit; }
/^Fedora release/ { print "f" $3; exit; }
' /etc/fedora-release`
elif test -f /etc/redhat-release; then
pp_rpm_distro=`awk '
/^Red Hat Enterprise Linux/ { print "rhel" $7; exit; }
/^CentOS release/ { print "centos" $3; exit; }
/^CentOS Linux release/ { print "centos" $4; exit; }
/^Red Hat Linux release/ { print "rh" $5; exit; }
' /etc/redhat-release`
elif test -f /etc/SuSE-release; then
pp_rpm_distro=`awk '
/^SuSE Linux [0-9]/ { print "suse" $3; exit; }
/^SUSE LINUX [0-9]/ { print "suse" $3; exit; }
/^openSUSE [0-9]/ { print "suse" $2; exit; }
/^S[uU]SE Linux Enterprise Server [0-9]/ { print "sles" $5; exit; }
/^S[uU]SE LINUX Enterprise Server [0-9]/ { print "sles" $5; exit; }
/^SuSE SLES-[0-9]/ { print "sles" substr($2,6); exit; }
' /etc/SuSE-release`
elif test -f /etc/pld-release; then
pp_rpm_distro=`awk '
/^[^ ]* PLD Linux/ { print "pld" $1; exit; }
' /etc/pld-release`
elif test X"`uname -s 2>/dev/null`" = X"AIX"; then
local r v
r=`uname -r`
v=`uname -v`
pp_rpm_distro="aix$v$r"
fi
pp_rpm_distro=`echo $pp_rpm_distro | tr -d .`
test -z "$pp_rpm_distro" &&
pp_warn "unknown distro"
}
pp_rpm_detect_rpmbuild () {
local cmd
for cmd in rpmbuild rpm; do
if `which $cmd > /dev/null 2>&1`; then
echo $cmd
return 0
fi
done
pp_error "Could not find rpmbuild"
# Default to `rpmbuild` in case it magically appears
echo rpmbuild
return 1
}
pp_rpm_label () {
local label arg
label="$1"; shift
for arg
do
test -z "$arg" || echo "$label: $arg"
done
}
pp_rpm_writefiles () {
local _l t m o g f p st fo farch
while read t m o g f p st; do
_l="$p"
test $t = d && _l="%dir ${_l%/}/"
if test x"$m" = x"-"; then
case "$t" in
d) m=755;;
f) m=644;;
esac
fi
test x"$o" = x"-" && o="${pp_rpm_defattr_uid:-root}"
test x"$g" = x"-" && g="${pp_rpm_defattr_gid:-root}"
_l="%attr($m,$o,$g) $_l"
if test "$t" = "f" -a x"$pp_rpm_arch" = x"auto"; then
fo=`file "${pp_destdir}$p" 2>/dev/null`
#NB: The following should match executables and shared objects,
#relocatable objects. It will not match .a files however.
case "$fo" in
*": ELF 32-bit LSB "*", Intel 80386"*)
farch=i386;;
*": ELF 64-bit LSB "*", AMD x86-64"*|\
*": ELF 64-bit LSB "*", x86-64"*)
farch=x86_64;;
*": ELF 32-bit MSB "*", PowerPC"*)
farch=ppc;;
*": ELF 64-bit MSB "*", 64-bit PowerPC"*)
farch=ppc64;;
*": ELF 64-bit LSB "*", IA-64"*)
farch=ia64;;
*": ELF 32-bit MSB "*", IBM S/390"*)
farch=s390;;
*": ELF 64-bit MSB "*", IBM S/390"*)
farch=s390x;;
*"executable (RISC System/6000)"*)
farch=ppc;;
*"64-bit XCOFF executable"*)
farch=ppc64;;
*" ELF "*)
farch=ELF;;
*)
farch=noarch;;
esac
# If file(1) doesn't provide enough info, try readelf(1)
if test "$farch" = "ELF"; then
fo=`readelf -h "${pp_destdir}$p" | awk '{if ($1 == "Class:") {class=$2} else if ($1 == "Machine:") {machine=$0; sub(/^ *Machine: */, "", machine)}} END {print class " " machine}' 2>/dev/null`
case "$fo" in
"ELF32 Intel 80386")
farch=i386;;
"ELF64 "*[xX]"86-64")
farch=x86_64;;
"ELF32 PowerPC")
farch=ppc;;
"ELF64 PowerPC"*)
farch=ppc64;;
"ELF64 IA-64")
farch=ia64;;
"ELF32 IBM S/390")
farch=s390;;
"ELF64 IBM S/390")
farch=s390x;;
*)
farch=noarch;;
esac
fi
pp_debug "file: $fo -> $farch"
test x"$farch" = x"noarch" || pp_add_to_list pp_rpm_arch_seen $farch
fi
case $f in *v*) _l="%config(noreplace) $_l";; esac
echo "$_l"
done
echo
}
pp_rpm_subname () {
case "$1" in
run) : ;;
dbg) echo "${2}${pp_rpm_dbg_pkgname}";;
dev) echo "${2}${pp_rpm_dev_pkgname}";;
doc) echo "${2}${pp_rpm_doc_pkgname}";;
*) pp_error "unknown component '$1'";
esac
}
pp_rpm_depend () {
local _name _vers
while read _name _vers; do
case "$_name" in ""| "#"*) continue ;; esac
echo "Requires: $_name ${_vers:+>= $_vers}"
done
}
pp_rpm_conflict () {
local _name _vers
while read _name _vers; do
case "$_name" in ""| "#"*) continue ;; esac
echo "Conflicts: $_name ${_vers:+>= $_vers}"
done
}
pp_rpm_override_requires () {
local orig_find_requires
if test -z "$pp_rpm_depend_filter_cmd"; then
return 0
fi
orig_find_requires=`rpm --eval '%{__find_requires}'`
cat << EOF > "$pp_wrkdir/filtered-find-requires"
$orig_find_requires \$@ | $pp_rpm_depend_filter_cmd
EOF
chmod +x "$pp_wrkdir/filtered-find-requires"
echo "%define __find_requires $pp_wrkdir/filtered-find-requires"
# Might be necessary for old versions of RPM? Not for 4.4.2.
#echo "%define _use_internal_dependency_generator 0"
}
pp_backend_rpm () {
local cmp specfile _summary _group _desc _pkg _subname svc
specfile=$pp_wrkdir/$name.spec
: > $specfile
#-- force existence of a 'run' component
pp_add_component run
: >> $pp_wrkdir/%files.run
if test -z "$pp_rpm_arch"; then
pp_error "Unknown RPM architecture"
return 1
fi
#-- Write the header components of the RPM spec file
cat <<-. >>$specfile
Name: ${pp_rpm_name:-$name}
Version: ${pp_rpm_version:-$version}
Release: ${pp_rpm_release:-1}
Summary: ${pp_rpm_summary:-$summary}
Group: ${pp_rpm_group}
License: ${pp_rpm_license}
.
if test -n "$pp_rpm_url"; then
pp_rpm_label "URL" "$pp_rpm_url" >>$specfile
fi
pp_rpm_label "Vendor" "${pp_rpm_vendor:-$vendor}" >>$specfile
pp_rpm_label "Packager" "$pp_rpm_packager" >>$specfile
pp_rpm_label "Provides" "$pp_rpm_provides" >>$specfile
pp_rpm_label "Requires" "$pp_rpm_requires" >>$specfile
test -n "$pp_rpm_serial" && pp_warn "pp_rpm_serial deprecated"
if test -n "$pp_rpm_epoch"; then
#-- Epoch was introduced in RPM 2.5.6
case `$pp_rpm_rpmbuild --version 2>/dev/null` in
1.*|2.[0-5].*|2.5.[0-5])
pp_rpm_label "Serial" $pp_rpm_epoch >>$specfile;;
*)
pp_rpm_label "Epoch" $pp_rpm_epoch >>$specfile;;
esac
fi
if test -n "$pp_rpm_requires"; then
pp_rpm_label "Requires" "$pp_rpm_requires" >>$specfile
elif test -s $pp_wrkdir/%depend.run; then
pp_rpm_depend < $pp_wrkdir/%depend.run >> $specfile
fi
if test -s $pp_wrkdir/%conflict.run; then
pp_rpm_conflict < $pp_wrkdir/%conflict.run >> $specfile
fi
pp_rpm_override_requires >> $specfile
cat <<-. >>$specfile
%description
${pp_rpm_description:-$description}
.
for cmp in $pp_components; do
case $cmp in
run) continue;;
dev) _summary="development tools for $pp_rpm_summary"
_group="$pp_rpm_dev_group"
_desc="${pp_rpm_dev_description:-Development libraries for $name. $pp_rpm_description.}"
;;
doc) _summary="documentation for $pp_rpm_summary"
_group="$pp_rpm_doc_group"
_desc="${pp_rpm_doc_description:-Documentation for $name. $pp_rpm_description.}"
;;
dbg) _summary="diagnostic tools for $pp_rpm_summary"
_group="$pp_rpm_dbg_group"
_desc="${pp_rpm_dbg_description:-Diagnostic tools for $name.}"
;;
esac
_subname=`pp_rpm_subname $cmp`
cat <<-.
%package $_subname
Summary: $name $_summary
Group: $_group
.
eval '_pkg="$pp_rpm_'$cmp'_requires"'
if test -n "$_pkg"; then
eval pp_rpm_label Requires ${pp_rpm_name:-$name} $_pkg
elif test -s $pp_wrkdir/%depend.$cmp; then
pp_rpm_depend < $pp_wrkdir/%depend.$cmp >> $specfile
fi
if test -s $pp_wrkdir/%conflict.$cmp; then
pp_rpm_conflict < $pp_wrkdir/%conflict.$cmp >> $specfile
fi
eval '_pkg="$pp_rpm_'$cmp'_provides"'
eval pp_rpm_label Provides $_pkg
cat <<-.
%description $_subname
$_desc
.
done >>$specfile
#-- NB: we don't put any %prep, %build or %install RPM sections
# into the spec file.
#-- add service start/stop code
if test -n "$pp_services"; then
pp_rpm_service_install_common >> $pp_wrkdir/%post.run
#-- record the uninstall commands in reverse order
for svc in $pp_services; do
pp_load_service_vars $svc
pp_rpm_service_make_init_script $svc
#-- append %post code to install the svc
pp_rpm_service_install $svc >> $pp_wrkdir/%post.run
#-- prepend %preun code to uninstall svc
# (use files in case vars are modified)
pp_rpm_service_remove $svc | pp_prepend $pp_wrkdir/%preun.run
done
pp_rpm_service_remove_common | pp_prepend $pp_wrkdir/%preun.run
fi
# make convenience service groups
if test -n "$pp_service_groups"; then
for grp in $pp_service_groups; do
pp_rpm_service_group_make_init_script \
$grp "`pp_service_get_svc_group $grp`"
done
fi
#-- Write the RPM %file sections
# (do this after services, since services adds to %files.run)
for cmp in $pp_components; do
_subname=`pp_rpm_subname $cmp`
if test -s $pp_wrkdir/%check.$cmp; then
echo ""
echo "%pre $_subname"
cat $pp_wrkdir/%check.$cmp
echo : # causes script to exit true by default
fi
if test -s $pp_wrkdir/%files.$cmp; then
echo ""
echo "%files $_subname"
pp_rpm_writefiles < $pp_wrkdir/%files.$cmp
fi
if test -n "$pp_rpm_ghost"; then
for ghost in $pp_rpm_ghost; do
echo "%ghost $ghost"
done
fi
if test -s $pp_wrkdir/%pre.$cmp; then
echo ""
echo "%pre $_subname"
cat $pp_wrkdir/%pre.$cmp
echo : # causes script to exit true
fi
if test -s $pp_wrkdir/%post.$cmp; then
echo ""
echo "%post $_subname"
cat $pp_wrkdir/%post.$cmp
echo : # causes script to exit true
fi
if test -s $pp_wrkdir/%preun.$cmp; then
echo ""
echo "%preun $_subname"
cat $pp_wrkdir/%preun.$cmp
echo : # causes script to exit true
fi
if test -s $pp_wrkdir/%postun.$cmp; then
echo ""
echo "%postun $_subname"
cat $pp_wrkdir/%postun.$cmp
echo : # causes script to exit true
fi
done >>$specfile
#-- create a suitable work area for rpmbuild
cat <<-. >$pp_wrkdir/.rpmmacros
%_topdir $pp_wrkdir
# XXX Note escaped %% for use in headerSprintf
%_rpmfilename %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
.
mkdir $pp_wrkdir/RPMS
mkdir $pp_wrkdir/BUILD
if test x"$pp_rpm_arch" = x"auto"; then
#-- Reduce the arch_seen list to exactly one item
case "$pp_rpm_arch_seen" in
"i386 x86_64"|"x86_64 i386")
pp_rpm_arch_seen=x86_64;;
*"s390 s390x"* | *"s390x s390"* )
pp_rpm_arch_seen=s390x;;
*" "*)
pp_error "detected multiple targets: $pp_rpm_arch_seen"
pp_rpm_arch_seen=unknown;; # not detected
"")
pp_warn "detected no binaries: using target noarch"
pp_rpm_arch_seen=noarch;;
*)
pp_debug "detected architecture $pp_rpm_arch_seen"
esac
pp_rpm_arch="$pp_rpm_arch_seen"
fi
. $pp_wrkdir/%fixup
$pp_opt_debug && cat $specfile
pp_debug "creating: `pp_backend_rpm_names`"
pp_debug "pp_rpm_arch_seen = <${pp_rpm_arch_seen}>"
pp_debug "pp_rpm_arch = <${pp_rpm_arch}>"
HOME=$pp_wrkdir \
pp_verbose \
$pp_rpm_rpmbuild -bb \
--buildroot="$pp_destdir/" \
--target="${pp_rpm_arch}" \
--define='_unpackaged_files_terminate_build 0' \
--define='_use_internal_dependency_generator 0' \
`$pp_opt_debug && echo --verbose || echo --quiet` \
$pp_rpm_rpmbuild_extra_flags \
$specfile ||
pp_error "Problem creating RPM packages"
for f in `pp_backend_rpm_names`; do
# The package might be in an arch-specific subdir
pkgfile=not-found
for dir in $pp_wrkdir/RPMS/${pp_rpm_arch} $pp_wrkdir/RPMS; do
if test -f $dir/$f; then
pkgfile=$dir/$f
fi
done
if test x"$pkgfile" = x"not-found"; then
pp_error "Problem predicting RPM filename: $f"
else
ln $pkgfile $pp_wrkdir/$f
fi
done
}
pp_rpm_output_name () {
echo "${pp_rpm_name:-$name}`pp_rpm_subname "$1" -`-${pp_rpm_version:-$version}-${pp_rpm_release:-1}.${pp_rpm_arch}.rpm"
}
pp_backend_rpm_names () {
local cmp _subname
for cmp in $pp_components; do
pp_rpm_output_name $cmp
done
}
pp_backend_rpm_cleanup () {
:
}
pp_rpm_print_requires () {
local _subname _name
echo "CPU:$pp_rpm_arch"
## XXX should be lines of the form (from file/ldd/objdump)
# EXEC:/bin/sh
# RTLD:libc.so.4:open
rpm -q --requires -p $pp_wrkdir/`pp_rpm_output_name $1` |sed -e '/^rpmlib(/d;s/ //g;s/^/RPM:/' | sort -u
}
pp_backend_rpm_install_script () {
local cmp _subname
echo "#!/bin/sh"
pp_install_script_common
cat <<.
cmp_to_pkgname () {
local oi name
if test x"\$1" = x"--only-installed"; then
#-- only print if installation detected
oi=false
shift
else
oi=true
fi
test x"\$*" = x"all" &&
set -- $pp_components
for cmp
do
case \$cmp in
.
for cmp in $pp_components; do
_subname=`pp_rpm_subname $cmp -`
echo "$cmp) name=${pp_rpm_name:-$name}${_subname};;"
done
cat <<.
*) usage;;
esac
if \$oi || rpm -q "\$name" >/dev/null 2>/dev/null; then
echo "\$name"
fi
done
}
cmp_to_pathname () {
test x"\$*" = x"all" &&
set -- $pp_components
for cmp
do
case \$cmp in
.
for cmp in $pp_components; do
echo "$cmp) echo \${PP_PKGDESTDIR:-.}/`pp_rpm_output_name $cmp` ;;"
done
cat <<.
*) usage;;
esac
done
}
print_requires () {
test x"\$*" = x"all" &&
set -- $pp_components
for cmp
do
case \$cmp in
.
for cmp in $pp_components; do
echo "$cmp) cat <<'._end'"
pp_rpm_print_requires $cmp
echo "._end"; echo ';;'
done
cat <<.
*) usage;;
esac
done
}
test \$# -eq 0 && usage
op="\$1"; shift
case "\$op" in
list-components)
test \$# -eq 0 || usage \$op
echo $pp_components
;;
list-services)
test \$# -eq 0 || usage \$op
echo $pp_services
;;
list-files)
test \$# -ge 1 || usage \$op
cmp_to_pathname "\$@"
;;
install)
test \$# -ge 1 || usage \$op
verbose rpm -U --replacepkgs --oldpackage \
\`cmp_to_pathname "\$@"\`
;;
uninstall)
test \$# -ge 1 || usage \$op
pkgs=\`cmp_to_pkgname --only-installed "\$@"\`
if test -z "\$pkgs"; then
verbosemsg "nothing to uninstall"
else
verbose rpm -e \$pkgs
fi
;;
start|stop)
test \$# -ge 1 || usage \$op
ec=0
for svc
do
verbose /etc/init.d/\$svc \$op || ec=1
done
exit \$ec
;;
print-platform)
test \$# -eq 0 || usage \$op
echo "linux-${pp_rpm_arch}"
;;
print-requires)
test \$# -ge 1 || usage \$op
print_requires "\$@"
;;
*)
usage
;;
esac
.
}
pp_backend_rpm_probe () {
echo "${pp_rpm_distro}-${pp_rpm_arch_std}"
}
pp_backend_rpm_vas_platforms () {
case "$pp_rpm_arch_std" in
x86_64) echo "linux-x86_64.rpm linux-x86.rpm";;
*86) echo "linux-x86.rpm";;
s390) echo "linux-s390";;
s390x) echo "linux-s390x";;
ppc*) echo "linux-glibc23-ppc64 linux-glibc22-ppc64";;
ia64) echo "linux-ia64";;
*) pp_die "unknown architecture $pp_rpm_arch_std";;
esac
}
pp_rpm_service_install_common () {
cat <<-'.'
_pp_install_service () {
local svc level
svc="$1"
if [ -x /usr/lib/lsb/install_initd -a ! -r /etc/redhat-release ]
then
# LSB-style install
/usr/lib/lsb/install_initd /etc/init.d/$svc &> /dev/null
elif [ -x /sbin/chkconfig ]; then
# Red Hat/chkconfig-style install
/sbin/chkconfig --add $svc &> /dev/null
/sbin/chkconfig $svc off &> /dev/null
else
: # manual links under /etc/init.d
fi
}
_pp_enable_service () {
local svc level
svc="$1"
if [ -x /usr/lib/lsb/install_initd -a ! -r /etc/redhat-release ]
then
# LSB-style install
: # not sure how to enable
elif [ -x /sbin/chkconfig ]; then
# Red Hat/chkconfig-style install
/sbin/chkconfig $svc on &> /dev/null
else
# manual install
set -- `sed -n -e 's/^# Default-Start://p' /etc/init.d/$svc`
start_priority=`sed -n -e 's/^# X-Quest-Start-Priority:[[:space:]]*//p' /etc/init.d/$svc`
stop_priority=`sed -n -e 's/^# X-Quest-Stop-Priority:[[:space:]]*//p' /etc/init.d/$svc`
# Provide default start & stop priorities of 20 & 80 in
# accordance with Debian update-rc.d defaults
if [ -z "$start_priority" ]; then
start_priority=20
fi
if [ -z "$stop_priority" ]; then
stop_priority=80
fi
if [ -d "/etc/rc.d" ];then
rcdir=/etc/rc.d
else
rcdir=/etc
fi
for level
do ln -sf /etc/init.d/$svc $rcdir/rc$level.d/S$start_priority$svc; done
set -- `sed -n -e 's/^# Default-Stop://p' /etc/init.d/$svc`
for level
do ln -sf /etc/init.d/$svc $rcdir/rc$level.d/K$stop_priority$svc; done
fi
}
.
}
pp_rpm_service_remove_common () {
cat <<-'.'
_pp_remove_service () {
local svc
svc="$1"
/etc/init.d/$svc stop >/dev/null 2>&1
if [ -x /usr/lib/lsb/remove_initd -a ! -r /etc/redhat-release ]
then
/usr/lib/lsb/remove_initd /etc/init.d/$svc &> /dev/null
elif [ -x /sbin/chkconfig ]; then
/sbin/chkconfig --del $svc &> /dev/null
else
if [ -d "/etc/rc.d" ];then
rcdir=/etc/rc.d
else
rcdir=/etc
fi
rm -f $rcdir/rc?.d/[SK]??$svc
fi
}
.
}
pp_rpm_service_install () {
pp_rpm_service_make_init_script $1 >/dev/null ||
pp_error "could not create init script for service $1"
echo "_pp_install_service $1"
test $enable = yes && echo "_pp_enable_service $1"
}
pp_rpm_service_remove () {
cat <<-.
if [ "\$1" = "remove" -o "\$1" = "0" ]; then
# only remove the service if not upgrade
_pp_remove_service $1
fi
.
}
pp_backend_rpm_init_svc_vars () {
reload_signal=
start_runlevels=${pp_rpm_default_start_runlevels-"2 3 4 5"} # == lsb default-start
stop_runlevels=${pp_rpm_default_stop_runlevels-"0 1 6"} # == lsb default-stop
svc_description="${pp_rpm_default_svc_description}" # == lsb short descr
svc_process=
lsb_required_start='$local_fs $network'
lsb_should_start=
lsb_required_stop=
lsb_description=
start_priority=50
stop_priority=50 #-- stop_priority = 100 - start_priority
}
pp_rpm_service_group_make_init_script () {
local grp=$1
local svcs="$2"
local script=/etc/init.d/$grp
local out=$pp_destdir$script
pp_add_file_if_missing $script run 755 || return 0
cat <<-. >>$out
#!/bin/sh
svcs="$svcs"
.
cat <<-'.' >>$out
#-- prints usage message
pp_usage () {
echo "usage: $0 {start|stop|status|restart|reload|condrestart|try-restart|force-reload}" >&2
return 2
}
#-- starts services in order.. stops them all if any break
pp_start () {
undo=
for svc in $svcs; do
if /etc/init.d/$svc start; then
undo="$svc $undo"
else
if test -n "$undo"; then
for svc in $undo; do
/etc/init.d/$svc stop
done
return 1
fi
fi
done
return 0
}
#-- stops services in reverse
pp_stop () {
reverse=
for svc in $svcs; do
reverse="$svc $reverse"
done
rc=0
for svc in $reverse; do
/etc/init.d/$svc stop || rc=$?
done
return $rc
}
#-- returns true only if all services return true status
pp_status () {
rc=0
for svc in $svcs; do
/etc/init.d/$svc status || rc=$?
done
return $rc
}
pp_reload () {
rc=0
for svc in $svcs; do
/etc/init.d/$svc reload || rc=$?
done
return $rc
}
case "$1" in
start) pp_start;;
stop) pp_stop;;
restart) pp_stop; pp_start;;
status) pp_status;;
try-restart|condrestart)
if pp_status >/dev/null; then
pp_restart
fi;;
reload) pp_reload;;
force-reload) if pp_status >/dev/null; then
pp_reload
else
pp_restart
fi;;
*) pp_usage;;
esac
.
chmod 755 $out
}
pp_rpm_service_make_init_script () {
local svc=$1
local script=/etc/init.d/$svc
local out=$pp_destdir$script
local _process _cmd _rpmlevels
pp_add_file_if_missing $script run 755 || return 0
#-- start out as an empty shell script
cat <<-'.' >$out
#!/bin/sh
.
#-- determine the process name from $cmd unless $svc_process is given
set -- $cmd
_process=${svc_process:-"$1"}
#-- construct a start command that builds a pid file if needed
_cmd="$cmd";
if test -z "$pidfile"; then
pidfile=/var/run/$svc.pid
_cmd="$cmd & echo \$! > \$pidfile"
fi
if test "$user" != "root"; then
_cmd="su $user -c exec $_cmd";
fi
#-- generate the Red Hat chkconfig headers
_rpmlevels=`echo $start_runlevels | tr -d ' '`
cat <<-. >>$out
# chkconfig: ${_rpmlevels:--} ${start_priority:-50} ${stop_priority:-50}
# description: ${svc_description:-no description}
# processname: ${_process}
# pidfile: ${pidfile}
.
#-- generate the LSB init info
cat <<-. >>$out
### BEGIN INIT INFO
# Provides: ${svc}
# Required-Start: ${lsb_required_start}
# Should-Start: ${lsb_should_start}
# Required-Stop: ${lsb_required_stop}
# Default-Start: ${start_runlevels}
# Default-Stop: ${stop_runlevels}
# Short-Description: ${svc_description}
### END INIT INFO
# Generated by PolyPackage ${pp_version}
# ${copyright}
.
if test x"${svc_description}" = x"${pp_rpm_default_svc_description}"; then
svc_description=
fi
#-- write service-specific definitions
cat <<. >>$out
#-- definitions specific to service ${svc}
svc_name="${svc_description:-$svc service}"
user="${user}"
pidfile="${pidfile}"
stop_signal="${stop_signal}"
reload_signal="${reload_signal}"
pp_exec_cmd () { $_cmd; }
.
#-- write the generic part of the init script
cat <<'.' >>$out
#-- use system message logging, if available
if [ -f /lib/lsb/init-functions -a ! -r /etc/redhat-release ]; then
. /lib/lsb/init-functions
pp_success_msg () { log_success_msg "$@"; }
pp_failure_msg () { log_failure_msg "$@"; }
pp_warning_msg () { log_warning_msg "$@"; }
elif [ -f /etc/init.d/functions ]; then
. /etc/init.d/functions
pp_success_msg () { echo -n "$*"; success "$@"; echo; }
pp_failure_msg () { echo -n "$*"; failure "$@"; echo; }
pp_warning_msg () { echo -n "$*"; warning "$@"; echo; }
else
pp_success_msg () { echo ${1:+"$*:"} OK; }
pp_failure_msg () { echo ${1:+"$*:"} FAIL; }
pp_warning_msg () { echo ${1:+"$*:"} WARNING; }
fi
#-- prints a status message
pp_msg () { echo -n "$*: "; }
#-- prints usage message
pp_usage () {
echo "usage: $0 {start|stop|status|restart|reload|condrestart|try-restart|force-reload}" >&2
return 2
}
#-- reloads the service, if possible
# returns 0=success 1=failure 3=unimplemented
pp_reload () {
test -n "$reload_signal" || return 3 # unimplemented
pp_msg "Reloading ${svc_name}"
if pp_signal -${reload_signal}; then
pp_success_msg
return 0
else
pp_failure_msg "not running"
return 1
fi
}
#-- delivers signal $1 to the pidfile
# returns 0=success 1=failure
pp_signal () {
if test -r "$pidfile"; then
read pid < $pidfile
kill "$@" "$pid" 2>/dev/null
else
return 1
fi
}
#-- prints information about the service status
# returns 0=running 1=crashed 3=stopped
pp_status () {
pp_msg "Checking for ${svc_name}"
if pp_signal -0; then
pp_success_msg "running"
return 0
elif test -r "$pidfile"; then
pp_failure_msg "not running (crashed)"
return 1
else
pp_failure_msg "not running"
return 3
fi
}
#-- starts the service
# returns 0=success 1=failure
pp_start () {
pp_msg "Starting ${svc_name}"
if pp_status >/dev/null; then
pp_warning_msg "already started"
return 0
elif pp_exec_cmd; then
pp_success_msg
return 0
else
pp_failure_msg "cannot start"
return 1
fi
}
#-- stops the service
# returns 0=success (always)
pp_stop () {
pp_msg "Stopping ${svc_name}"
if pp_signal -${stop_signal}; then
pp_success_msg
else
pp_success_msg "already stopped"
fi
rm -f "$pidfile"
return 0
}
#-- stops and starts the service
pp_restart () {
pp_stop
pp_start
}
case "$1" in
start) pp_start;;
stop) pp_stop;;
restart) pp_restart;;
status) pp_status;;
try-restart|condrestart)
if pp_status >/dev/null; then
pp_restart
fi;;
reload) pp_reload;;
force-reload) if pp_status >/dev/null; then
pp_reload
else
pp_restart
fi;;
*) pp_usage;;
esac
.
chmod 755 $out
}
pp_backend_rpm_function () {
case "$1" in
pp_mkgroup) cat<<'.';;
/usr/sbin/groupadd -f -r "$1"
.
pp_mkuser:depends) echo pp_mkgroup;;
pp_mkuser) cat<<'.';;
pp_mkgroup "${2:-$1}" || return 1
/usr/sbin/useradd \
-g "${2:-$1}" \
-M -d "${3:-/nonexistent}" \
-s "${4:-/bin/false}" \
-r "$1"
.
pp_havelib) cat<<'.';;
for pp_tmp_dir in `echo "/usr/lib:/lib${3:+:$3}" | tr : ' '`; do
test -r "$pp_tmp_dir/lib$1.so{$2:+.$2}" && return 0
done
return 1
.
*) false;;
esac
}
: NOTES <<.
# creating a dmg file for publishing on the web
hdiutil create -srcfolder /path/foo foo.dmg
hdiutil internet-enable -yes /path/foo.dmg
# Layout for packages
-/component/
-/extras/postinstall
-/extras/postupgrade
# /Developer/usr/bin/packagemaker (man packagemaker)
Make a bunch of packages, and then build a 'distribution'
which is only understood by macos>10.4
# Message files in the resource path used are
Welcome.{rtf,html,rtfd,txt} - limited text shown in Intro
ReadMe.{rtf,html,rtfd,txt} - scrollable/printable, after Intro
License.{rtf,html,rtfd,txt} - ditto, user must click 'Accept'
background.{jpg,tif,gif,pict,eps,pdf} 620x418 background image
# These scripts looked for in the resource path
InstallationCheck $pkgpath $defaultloc $targetvol
0:ok 32:warn 32+x:warn[1] 64:stop 96+x:stop[2]
VolumeCheck $volpath
0:ok 32:failure 32+x:failure[3]
preflight $pkgpath $targetloc $targetvol [priv]
preinstall $pkgpath $targetloc $targetvol [priv]
preupgrade $pkgpath $targetloc $targetvol [priv]
postinstall $pkgpath $targetloc $targetvol [priv]
postupgrade $pkgpath $targetloc $targetvol [priv]
postflight $pkgpath $targetloc $targetvol [priv]
0:ok else fail (for all scripts)
A detailed reason is deduced by finding an index x (16..31)
in the file InstallationCheck.strings or VolumeCheck.strings.
Scripts marked [priv] are executed with root privileges.
None of the [priv] scripts are used by metapackages.
# Default permissions
Permissions of existing directories should match those
of a clean install of the OS; typically root:admin 0775
New directories or files should be 0775 or 0664 with the
appropriate user:group.
Exceptions:
/etc root:admin 0755
/var root:admin 0755
Info.plist = {
CFBundleGetInfoString: "1.2.3, Quest Software, Inc.",
CFBundleIdentifier: "com.quest.rc.openssh",
CFBundleShortVersionString: "1.2.3",
IFMajorVersion: 1,
IFMinorVersion: 2,
IFPkgFlagAllowBackRev: false,
IFPkgFlagAuthorizationAction: "AdminAuthorization",
IFPkgFlagDefaultLocation: "/",
IFPkgFlagFollowLinks: true,
IFPkgFlagInstallFat: false,
IFPkgFlagInstalledSize: , # this is added by packagemaker
IFPkgFlagIsRequired: false,
IFPkgFlagOverwritePermissions: false,
IFPkgFlagRelocatable: false,
IFPkgFlagRestartAction: "NoRestart",
IFPkgFlagRootVolumeOnly: false,
IFPkgFlagUpdateInstalledLanguages: false,
IFPkgFormatVersion= 0.10000000149011612,
IFRequirementDicts: [ {
Level = "requires",
SpecArgument = "/opt/quest/lib/libvas.4.2.0.dylib",
SpecType = "file",
TestObject = true,
TestOperator = "eq", } ]
}
Description.plist = {
IFPkgDescriptionDescription = "this is the description text",
IFPkgDescriptionTitle = "quest-openssh"
}
# Startup scripts
'launchd' is a kind of combined inetd and rc/init.d system.
Create a /Library/LaunchDaemons/$daemonname.plist file
Examples found in /System/Library/LaunchDaemons/
See manual page launchd.plist(5) for details:
{ Label: "com.quest.rc.foo", # required
Program: "/sbin/program",
ProgramArguments: [ "/sbin/program", "arg1", "arg2" ], # required
RunAtLoad: true,
WatchPaths: [ "/etc/crontab" ],
QueueDirectories: [ "/var/cron/tabs" ],
inetdCompatibility: { Wait: false }, # inetd-only
OnDemand: false, # recommended
SessionCreate: true,
UserName: "nobody",
InitGroups: true,
Sockets: { # inetd only
Listeners: {
SockServiceName: "ssh",
Bonjour: ["ssh", "sftp-ssh"], } },
Disabled: false,
StandardErrorPath: "/dev/null",
}
How to add a new user
dscl . -create /Users/$user
dscl . -create /Users/$user UserShell /bin/bash
dscl . -create /Users/$user RealName "$user"
dscl . -create /Users/$user UniqueID $uid
dscl . -create /Users/$user PrimaryGroupID $gid
dscl . -create /Users/$user NFSHomeDirectory /Users/$user
dscl . -passwd /Users/$user "$passwd"
mkdir /Users/$user
chown $uid.$gid /Users/$user
.
pp_platforms="$pp_platforms macos"
pp_backend_macos_detect () {
[ x"$1" = x"Darwin" ]
}
pp_backend_macos_init () {
pp_macos_default_bundle_id_prefix="com.quest.rc."
pp_macos_bundle_id=
pp_macos_bundle_vendor=
pp_macos_bundle_version=
pp_macos_bundle_info_string=
pp_macos_pkg_type=bundle
pp_macos_pkg_license=
pp_macos_pkg_readme=
pp_macos_pkg_welcome=
pp_macos_sudo=sudo
pp_macos_installer_plugin=
# OS X puts the library version *before* the .dylib extension
pp_shlib_suffix='*.dylib'
}
pp_macos_plist () {
typeset in
in=""
while test $# -gt 0; do
case "$1" in
start-plist) cat <<-.; in=" "; shift ;;
.
end-plist) echo ""; in=; shift;;
'[') echo "$in"; in="$in "; shift;;
']') echo "$in"; in="${in# }"; shift;;
'{') echo ""; in="$in "; shift;;
'}') echo ""; in="${in# }"; shift;;
key) shift; echo "$in$1"; shift;;
string) shift;
echo "$1" | sed -e 's/&/&/g;s//\>/g;' \
-e 's/^/'"$in"'/;s/$/<\/string>/';
shift;;
true) echo "$in"; shift;;
false) echo "$in"; shift;;
real) shift; echo "$in$1"; shift;;
integer) shift; echo "$in$1"; shift;;
date) shift; echo "$in$1"; shift;; # ISO 8601 format
data) shift; echo "$in$1"; shift;; # base64 encoded
*) pp_error "pp_macos_plist: bad argument '$1'"; shift;;
esac
done
}
pp_macos_rewrite_cpio () {
typeset script
script=$pp_wrkdir/cpio-rewrite.pl
cat <<-'.' >$script
#!/usr/bin/perl
#
# Filter a cpio file, applying the user/group/mode specified in %files
#
# A CPIO header block has octal fields at the following offset/lengths:
# 0 6 magic
# 6 6 dev
# 12 6 ino
# 18 6 mode
# 24 6 uid
# 30 6 gid
# 36 6 nlink
# 42 6 rdev
# 48 11 mtime
# 59 6 namesize (including NUL terminator)
# 65 11 filesize
# 76 --
#
use strict;
use warnings;
no strict 'subs';
# set %uid, %gid, %mode based on %files
my (%uid, %gid, %mode, %users, %groups);
my %type_map = ( d => 0040000, f => 0100000, s => 0120000 );
while () {
my ($type,$mode,$uid,$gid,$flags,$name) =
m/^(.) (\S+) (\S+) (\S+) (\S+) (\S+)/;
$mode = $type eq "f" ? "0644" : "0755" if $mode eq "-";
$uid = 0 if $uid eq "-";
$gid = 0 if $gid eq "-";
if ($uid ne "=" and $uid =~ m/\D/) {
unless (exists $users{$uid}) {
my @pw = getpwnam($uid) or die "bad username '$uid'";
$users{$uid} = $pw[2];
}
$uid = $users{$uid};
}
if ($gid ne "=" and $gid =~ m/\D/) {
unless (exists $groups{$gid}) {
my @gr = getgrnam($gid) or die "bad group'$gid'";
$groups{$gid} = $gr[2];
}
$gid = $groups{$gid};
}
$name =~ s:/$:: if $type eq "d";
$name = ".".$name."\0";
$uid{$name} = sprintf("%06o",int($uid)) unless $uid eq "=";
$gid{$name} = sprintf("%06o",int($gid)) unless $gid eq "=";
$mode{$name} = sprintf("%06o",oct($mode)|$type_map{$type}) unless $mode eq "=";
}
undef %users;
undef %groups;
# parse the cpio file
my $hdrlen = 76;
while (read(STDIN, my $header, $hdrlen)) {
my ($name, $namesize, $filesize);
my $filepad = 0;
if ($header =~ m/^07070[12]/) {
# SVR4 ASCII format, convert to ODC
if ($hdrlen == 76) {
# Read in rest of header and update header len for SVR4
read(STDIN, $header, 110 - 76, 76);
$hdrlen = 110;
}
my $ino = hex(substr($header, 6, 8)) & 0x3ffff;
my $mode = hex(substr($header, 14, 8)) & 0x3ffff;
my $uid = hex(substr($header, 22, 8)) & 0x3ffff;
my $gid = hex(substr($header, 30, 8)) & 0x3ffff;
my $nlink = hex(substr($header, 38, 8)) & 0x3ffff;
my $mtime = hex(substr($header, 46, 8)) & 0xffffffff;
$filesize = hex(substr($header, 54, 8)) & 0xffffffff;
my $dev_maj = hex(substr($header, 62, 8));
my $dev_min = hex(substr($header, 70, 8));
my $dev = &makedev($dev_maj, $dev_min) & 0x3ffff;
my $rdev_maj = hex(substr($header, 78, 8));
my $rdev_min = hex(substr($header, 86, 8));
my $rdev = &makedev($rdev_maj, $rdev_min) & 0x3ffff;
$namesize = hex(substr($header, 94, 8)) & 0x3ffff;
read(STDIN, $name, $namesize);
# Header + name is padded to a multiple of 4 bytes
my $namepad = (($hdrlen + $namesize + 3) & 0xfffffffc) - ($hdrlen + $namesize);
read(STDIN, my $padding, $namepad) if ($namepad);
# File data is padded to be a multiple of 4 bytes
$filepad = (($filesize + 3) & 0xfffffffc) - $filesize;
my $new_header = sprintf("070707%06o%06o%06o%06o%06o%06o%06o%011o%06o%011o", $dev, $ino, $mode, $uid, $gid, $nlink, $rdev, $mtime, $namesize, $filesize);
$header = $new_header;
} elsif ($header =~ m/^070707/) {
# POSIX Portable ASCII Format
$namesize = oct(substr($header, 59, 6));
$filesize = oct(substr($header, 65, 11));
read(STDIN, $name, $namesize);
} else {
die "bad magic";
}
# update uid, gid and mode (already in octal)
substr($header, 24, 6) = $uid{$name} if exists $uid{$name};
substr($header, 30, 6) = $gid{$name} if exists $gid{$name};
substr($header, 18, 6) = $mode{$name} if exists $mode{$name};
print($header, $name);
# check for trailer at EOF
last if $filesize == 0 && $name =~ /^TRAILER!!!\0/;
# copy-through the file data
while ($filesize > 0) {
my $seg = 8192;
$seg = $filesize if $filesize < $seg;
read(STDIN, my $data, $seg);
print $data;
$filesize -= $seg;
}
# If file data is padded, skip it
read(STDIN, my $padding, $filepad) if ($filepad);
}
# pass through any padding at the end (blocksize-dependent)
for (;;) {
my $numread = read(STDIN, my $data, 8192);
last unless $numread;
print $data;
}
exit(0);
sub makedev {
(((($_[0] & 0xff)) << 24) | ($_[1] & 0xffffff));
}
__DATA__
.
# Append to the script the %files data
cat "$@" > $script
/usr/bin/perl $script || pp_error "pp_macos_rewrite_cpio error";
}
pp_macos_files_bom () {
typeset _l t m o g f p st owner
while read t m o g f p st; do
# make sure that $m is padded up to 4 digits long
case "$m" in
?) m="000$m";;
??) m="00$m";;
???) m="0$m";;
?????*) pp_error "pp_macos_writebom: mode '$m' too long";;
esac
# convert owner,group into owner/group in octal
case $o in -) o=0;; esac
case $g in -) g=0;; esac
owner=`pp_d2o $o`/`pp_d2o $g`
case $t in
f)
test x"$m" = x"000-" && m=0644
echo ".$p 10$m $owner `
/usr/bin/cksum < "${pp_destdir}$p" |
awk '{print $2 " " $1}'`"
;;
d)
test x"$m" = x"000-" && m=0755
echo ".${p%/} 4$m $owner"
;;
s)
test x"$m" = x"000-" && m=0755
rl=`/usr/bin/readlink "${pp_destdir}$p"`
#test x"$rl" = x"$st" ||
# pp_error "symlink mismatch $rl != $st"
echo ".$p 12$m $owner `
/usr/bin/readlink -n "${pp_destdir}$p" |
/usr/bin/cksum |
awk '{print $2 " " $1}'` $st"
;;
esac
done
}
pp_macos_bom_fix_parents () {
perl -pe '
sub dirname { my $d=shift; $d=~s,/[^/]*$,,; $d; }
sub chk { my $d=shift;
&chk(&dirname($d)) if $d =~ m,/,;
unless ($seen{$d}++) {
# Make sure we do not override system directories
if ($d =~ m:^\./(etc|var)$:) {
my $tgt = "private/$1";
my ($sum, $len) = split(/\s+/, `/usr/bin/printf "$tgt" | /usr/bin/cksum /dev/stdin`);
print "$d\t120755\t0/0\t$len\t$sum\t$tgt\n";
} elsif ($d eq "." || $d eq "./Library") {
print "$d\t41775\t0/80\n";
} elsif ($d eq "./Applications" || $d eq "./Developer") {
print "$d\t40775\t0/80\n";
} else {
print "$d\t40755\t0/0\n";
}
}
}
m/^(\S+)\s+(\d+)/;
if (oct($2) & 040000) {
$seen{$1}++; # directory
}
&chk(&dirname($1));'
}
pp_macos_files_size () {
typeset _l t m o g f p st owner
while read t m o g f p st; do
case $t in
f) wc -c < "${pp_destdir}$p";;
s) echo 4095;;
d) ;; # always seems to be zero
esac
done | awk '{n+=1+int($1/4096)} END {print n*4}'
}
pp_o2d () {
awk 'BEGIN { x=0; '`echo "$1" |
sed -e 's/./x=x*8+&;/g'`'print x;}' /dev/null; then
rm -f "$2"
/usr/bin/mkbom -i "$1" "$2"
return
fi
# On 10.4 we have this nonsense.
pp_warn "mkbom workaround: copying source files to staging area"
bomstage=$pp_wrkdir/bom_stage
$pp_macos_sudo /bin/mkdir "$bomstage"
while IFS=' ' read path mode ugid size cksumi linkpath; do
if test -h "$pp_destdir/$path"; then
$pp_macos_sudo /bin/ln -s "$linkpath" "$bomstage/$path"
else
if test -d "$pp_destdir/$path"; then
$pp_macos_sudo /bin/mkdir -p "$bomstage/$path"
else
$pp_macos_sudo /bin/cp "$pp_destdir/$path" "$bomstage/$path"
fi
$pp_macos_sudo /bin/chmod $mode "$bomstage/$path"
$pp_macos_sudo /usr/sbin/chown `echo $ugid| tr / :` "$bomstage/$path"
fi
done <"$1"
(cd $bomstage && $pp_macos_sudo mkbom . $pp_wrkdir/bom_stage.bom) ||
pp_error "mkbom failed"
$pp_macos_sudo mv $pp_wrkdir/bom_stage.bom "$2"
}
pp_backend_macos () {
: ${pp_macos_bundle_id:=$pp_macos_default_bundle_id_prefix$name}
case "$pp_macos_pkg_type" in
bundle) pp_backend_macos_bundle;;
flat) pp_backend_macos_flat;;
*) pp_error "unsupported package type $pp_macos_pkg_type";;
esac
}
pp_backend_macos_bundle () {
typeset pkgdir Contents Resources lprojdir svc
typeset Info_plist Description_plist
typeset bundle_vendor bundle_version size cmp filelists
mac_version=`sw_vers -productVersion`
bundle_vendor=${pp_macos_bundle_vendor:-$vendor}
if test -z "$pp_macos_bundle_version"; then
bundle_version=`echo "$version.0.0.0" | sed -n -e 's/[^0-9.]//g' \
-e 's/^\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*/\1/p'`
else
bundle_version="$pp_macos_bundle_version"
fi
source_version=`echo $version | sed 's/.*\.//'`
# build the package layout
pkgdir=$pp_wrkdir/$name.pkg
Contents=$pkgdir/Contents
Resources=$Contents/Resources
lprojdir=$Resources/en.lproj
mkdir $pkgdir $Contents $Resources $lprojdir ||
pp_error "Can't make package temporary directories"
echo "major: 1" > $Resources/package_version
echo "minor: 0" >> $Resources/package_version
echo "pmkrpkg1" > $Contents/PkgInfo
case $mac_version in
"10.6"*)
xattr -w "com.apple.TextEncoding" "macintosh;0" "$Resources/package_version"
xattr -w "com.apple.TextEncoding" "macintosh;0" "$Contents/PkgInfo"
;;
esac
# Copy welcome file/dir for display at package install time.
if test -n "$pp_macos_pkg_welcome"; then
typeset sfx
sfx=`echo "$pp_macos_pkg_welcome"|sed 's/^.*\.\([^\.]*\)$/\1/'`
case "$sfx" in
rtf|html|rtfd|txt) ;;
*) sfx=txt;;
esac
cp -R ${pp_macos_pkg_welcome} $Resources/Welcome.$sfx
fi
# Copy readme file/dir for display at package install time.
if test -n "$pp_macos_pkg_readme"; then
typeset sfx
sfx=`echo "$pp_macos_pkg_readme"|sed 's/^.*\.\([^\.]*\)$/\1/'`
case "$sfx" in
rtf|html|rtfd|txt) ;;
*) sfx=txt;;
esac
cp -R ${pp_macos_pkg_readme} $Resources/ReadMe.$sfx
fi
# Copy license file/dir for display at package install time.
if test -n "$pp_macos_pkg_license"; then
typeset sfx
sfx=`echo "$pp_macos_pkg_license"|sed 's/^.*\.\([^\.]*\)$/\1/'`
case "$sfx" in
rtf|html|rtfd|txt) ;;
*) sfx=txt;;
esac
cp -R ${pp_macos_pkg_license} $Resources/License.$sfx
fi
# Add services (may modify %files)
for svc in $pp_services .; do
test . = "$svc" && continue
pp_macos_add_service $svc
done
# Find file lists (%files.* includes ignore files)
for cmp in $pp_components; do
test -f $pp_wrkdir/%files.$cmp && filelists="$filelists${filelists:+ }$pp_wrkdir/%files.$cmp"
done
# compute the installed size
size=`cat $filelists | pp_macos_files_size`
#-- Create Info.plist
Info_plist=$Contents/Info.plist
pp_macos_plist \
start-plist \{ \
key CFBundleGetInfoString string \
"${pp_macos_bundle_info_string:-$version $bundle_vendor}" \
key CFBundleIdentifier string \
"${pp_macos_bundle_id}" \
key CFBundleName string "$name" \
key CFBundleShortVersionString string "$bundle_version" \
key IFMajorVersion integer 1 \
key IFMinorVersion integer 0 \
key IFPkgFlagAllowBackRev false \
key IFPkgFlagAuthorizationAction string "RootAuthorization" \
key IFPkgFlagDefaultLocation string "/" \
key IFPkgFlagFollowLinks true \
key IFPkgFlagInstallFat true \
key IFPkgFlagInstalledSize integer $size \
key IFPkgFlagIsRequired false \
key IFPkgFlagOverwritePermissions true \
key IFPkgFlagRelocatable false \
key IFPkgFlagRestartAction string "NoRestart" \
key IFPkgFlagRootVolumeOnly true \
key IFPkgFlagUpdateInstalledLanguages false \
key IFPkgFlagUseUserMask false \
key IFPkgFormatVersion real 0.10000000149011612 \
key SourceVersion string $source_version \
\} end-plist> $Info_plist
# write en.lproj/Description.plist
Description_plist=$lprojdir/Description.plist
pp_macos_plist \
start-plist \{ \
key IFPkgDescriptionDeleteWarning string "" \
key IFPkgDescriptionDescription string "$pp_macos_bundle_info_string" \
key IFPkgDescriptionTitle string "$name" \
key IFPkgDescriptionVersion string "$version" \
\} end-plist > $Description_plist
# write Resources/files
awk '{print $6}' $filelists > $Resources/files
# write package size file
printf \
"NumFiles 0
InstalledSize $size
CompressedSize 0
" > $Resources/$name.sizes
# write Resources/preinstall
for cmp in $pp_components; do
if test -s $pp_wrkdir/%pre.$cmp; then
if test ! -s $Resources/preinstall; then
echo "#!/bin/sh" > $Resources/preinstall
chmod +x $Resources/preinstall
fi
cat $pp_wrkdir/%pre.$cmp >> $Resources/preinstall
echo : >> $Resources/preinstall
fi
done
# write Resources/postinstall
for cmp in $pp_components; do
if test -s $pp_wrkdir/%post.$cmp; then
if test ! -s $Resources/postinstall; then
echo "#!/bin/sh" > $Resources/postinstall
chmod +x $Resources/postinstall
fi
cat $pp_wrkdir/%post.$cmp >> $Resources/postinstall
echo : >> $Resources/postinstall
fi
done
# write Resources/postupgrade
for cmp in $pp_components; do
if test -s $pp_wrkdir/%postup.$cmp; then
if test ! -s $Resources/postupgrade; then
echo "#!/bin/sh" > $Resources/postupgrade
chmod +x $Resources/postupgrade
fi
cat $pp_wrkdir/%postup.$cmp >> $Resources/postupgrade
echo : >> $Resources/postupgrade
fi
done
# write Resources/preremove
for cmp in $pp_components; do
if test -s $pp_wrkdir/%preun.$cmp; then
if test ! -s $Resources/preremove; then
echo "#!/bin/sh" > $Resources/preremove
chmod +x $Resources/preremove
fi
cat $pp_wrkdir/%preun.$cmp >> $Resources/preremove
echo : >> $Resources/preremove
fi
done
# write Resources/postremove
for cmp in $pp_components; do
if test -s $pp_wrkdir/%postun.$cmp; then
if test ! -s $Resources/postremove; then
echo "#!/bin/sh" > $Resources/postremove
chmod +x $Resources/postremove
fi
cat $pp_wrkdir/%postun.$cmp >> $Resources/postremove
echo : >> $Resources/postremove
fi
done
# write uninstall info
echo "version=$version" > $Resources/uninstall
if [ -n "$pp_macos_requires" ];then
echo "requires=$pp_macos_requires" >> $Resources/uninstall
fi
. $pp_wrkdir/%fixup
# Create the bill-of-materials (Archive.bom)
cat $filelists | pp_macos_files_bom | sort |
pp_macos_bom_fix_parents > $pp_wrkdir/tmp.bomls
pp_macos_mkbom $pp_wrkdir/tmp.bomls $Contents/Archive.bom
# Create the cpio archive (Archive.pax.gz)
(
cd $pp_destdir &&
awk '{ print "." $6 }' $filelists | sed 's:/$::' | sort | /usr/bin/cpio -o | pp_macos_rewrite_cpio $filelists | gzip -9f -c > $Contents/Archive.pax.gz
)
# Copy installer plugins if any
if test -n "$pp_macos_installer_plugin"; then
if test ! -f "$pp_macos_installer_plugin/InstallerSections.plist"; then
pp_error "Missing InstallerSections.plist file in $pp_macos_installer_plugin"
fi
mkdir -p $pkgdir/Plugins
cp -R "$pp_macos_installer_plugin"/* $pkgdir/Plugins
fi
test -d $pp_wrkdir/bom_stage && $pp_macos_sudo rm -rf $pp_wrkdir/bom_stage
rm -f ${name}-${version}.dmg
hdiutil create -fs HFS+ -srcfolder $pkgdir -volname $name ${name}-${version}.dmg
}
pp_backend_macos_flat () {
typeset pkgdir bundledir Resources lprojdir svc
typeset Info_plist Description_plist
typeset bundle_vendor bundle_version size numfiles cmp filelists
mac_version=`sw_vers -productVersion`
bundle_vendor=${pp_macos_bundle_vendor:-$vendor}
if test -z "$pp_macos_bundle_version"; then
bundle_version=`echo "$version.0.0.0" | sed -n -e 's/[^0-9.]//g' \
-e 's/^\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*/\1/p'`
else
bundle_version="$pp_macos_bundle_version"
fi
source_version=`echo $version | sed 's/.*\.//'`
# build the flat package layout
pkgdir=$pp_wrkdir/pkg
bundledir=$pp_wrkdir/pkg/$name.pkg
Resources=$pkgdir/Resources
lprojdir=$Resources/en.lproj
mkdir $pkgdir $bundledir $Resources $lprojdir ||
pp_error "Can't make package temporary directories"
# Add services (may modify %files)
for svc in $pp_services .; do
test . = "$svc" && continue
pp_macos_add_service $svc
done
# Find file lists (%files.* includes ignore files)
for cmp in $pp_components; do
test -f $pp_wrkdir/%files.$cmp && filelists="$filelists${filelists:+ }$pp_wrkdir/%files.$cmp"
done
# compute the installed size and number of files/dirs
size=`cat $filelists | pp_macos_files_size`
numfiles=`cat $filelists | wc -l`
numfiles="${numfiles##* }"
# Write Distribution file
cat <<-. >$pkgdir/Distribution
$name $version
.
if test -n "$pp_macos_pkg_welcome"; then
cp -R "${pp_macos_pkg_welcome}" $Resources
echo " " >>$pkgdir/Distribution
fi
if test -n "$pp_macos_pkg_readme"; then
cp -R "${pp_macos_pkg_readme}" $Resources
echo " " >>$pkgdir/Distribution
fi
if test -n "$pp_macos_pkg_license"; then
cp -R "${pp_macos_pkg_license}" $Resources
echo " " >>$pkgdir/Distribution
fi
cat <<-. >>$pkgdir/Distribution
#$name.pkg
.
# write scripts archive
# XXX - missing preupgrade, preflight, postflight
mkdir $pp_wrkdir/scripts
for cmp in $pp_components; do
if test -s $pp_wrkdir/%pre.$cmp; then
if test ! -s $pp_wrkdir/scripts/preinstall; then
echo "#!/bin/sh" > $pp_wrkdir/scripts/preinstall
chmod +x $pp_wrkdir/scripts/preinstall
fi
cat $pp_wrkdir/%pre.$cmp >> $pp_wrkdir/scripts/preinstall
echo : >> $pp_wrkdir/scripts/preinstall
fi
if test -s $pp_wrkdir/%post.$cmp; then
if test ! -s $pp_wrkdir/scripts/postinstall; then
echo "#!/bin/sh" > $pp_wrkdir/scripts/postinstall
chmod +x $pp_wrkdir/scripts/postinstall
fi
cat $pp_wrkdir/%post.$cmp >> $pp_wrkdir/scripts/postinstall
echo : >> $pp_wrkdir/scripts/postinstall
fi
if test -s $pp_wrkdir/%postup.$cmp; then
if test ! -s $pp_wrkdir/scripts/postupgrade; then
echo "#!/bin/sh" > $pp_wrkdir/scripts/postupgrade
chmod +x $pp_wrkdir/scripts/postupgrade
fi
cat $pp_wrkdir/%postup.$cmp >> $pp_wrkdir/scripts/postupgrade
echo : >> $pp_wrkdir/scripts/postupgrade
fi
# XXX - not supported
if test -s $pp_wrkdir/%preun.$cmp; then
if test ! -s $pp_wrkdir/scripts/preremove; then
echo "#!/bin/sh" > $pp_wrkdir/scripts/preremove
chmod +x $pp_wrkdir/scripts/preremove
fi
cat $pp_wrkdir/%preun.$cmp >> $pp_wrkdir/scripts/preremove
echo : >> $pp_wrkdir/scripts/preremove
fi
# XXX - not supported
if test -s $pp_wrkdir/%postun.$cmp; then
if test ! -s $pp_wrkdir/scripts/postremove; then
echo "#!/bin/sh" > $pp_wrkdir/scripts/postremove
chmod +x $pp_wrkdir/scripts/postremove
fi
cat $pp_wrkdir/%postun.$cmp >> $pp_wrkdir/scripts/postremove
echo : >> $pp_wrkdir/scripts/postremove
fi
done
if test "`echo $pp_wrkdir/scripts/*`" != "$pp_wrkdir/scripts/*"; then
# write scripts archive, scripts are mode 0755 uid/gid 0/0
# resetting the owner and mode is not strictly required
(
cd $pp_wrkdir/scripts || pp_error "Can't cd to $pp_wrkdir/scripts"
rm -f $pp_wrkdir/tmp.files.scripts
for s in *; do
echo "f 0755 0 0 - ./$s" >>$pp_wrkdir/tmp.files.scripts
done
find . -type f | /usr/bin/cpio -o | pp_macos_rewrite_cpio $pp_wrkdir/tmp.files.scripts | gzip -9f -c > $bundledir/Scripts
)
fi
# Write PackageInfo file
cat <<-. >$bundledir/PackageInfo
.
if test -s $bundledir/Scripts; then
echo " " >>$bundledir/PackageInfo
for s in preflight postflight preinstall postinstall preupgrade postupgrade; do
if test -s "$pp_wrkdir/scripts/$s"; then
echo " <$s file=\"$s\"/>" >>$bundledir/PackageInfo
fi
done
echo " " >>$bundledir/PackageInfo
fi
cat <<-. >>$bundledir/PackageInfo
.
. $pp_wrkdir/%fixup
# Create the bill-of-materials (Bom)
cat $filelists | pp_macos_files_bom | sort |
pp_macos_bom_fix_parents > $pp_wrkdir/tmp.bomls
pp_macos_mkbom $pp_wrkdir/tmp.bomls $bundledir/Bom
# Create the cpio payload
(
cd $pp_destdir || pp_error "Can't cd to $pp_destdir"
awk '{ print "." $6 }' $filelists | sed 's:/$::' | sort | /usr/bin/cpio -o | pp_macos_rewrite_cpio $filelists | gzip -9f -c > $bundledir/Payload
)
# Copy installer plugins if any
if test -n "$pp_macos_installer_plugin"; then
if test ! -f "$pp_macos_installer_plugin/InstallerSections.plist"; then
pp_error "Missing InstallerSections.plist file in $pp_macos_installer_plugin"
fi
mkdir -p $pkgdir/Plugins
cp -R "$pp_macos_installer_plugin"/* $pkgdir/Plugins
fi
test -d $pp_wrkdir/bom_stage && $pp_macos_sudo rm -rf $pp_wrkdir/bom_stage
# Create the flat package with xar (like pkgutil --flatten does)
# Note that --distribution is only supported by Mac OS X 10.6 and above
xar_flags="--compression=bzip2 --no-compress Scripts --no-compress Payload"
case $mac_version in
"10.5"*) ;;
*) xar_flags="$xar_flags --distribution";;
esac
(cd $pkgdir && /usr/bin/xar $xar_flags -cf "../$name-$version.pkg" *)
}
pp_backend_macos_cleanup () {
:
}
pp_backend_macos_names () {
case "$pp_macos_pkg_type" in
bundle) echo ${name}.pkg;;
flat) echo ${name}-${version}.pkg;;
*) pp_error "unsupported package type $pp_macos_pkg_type";;
esac
}
pp_backend_macos_install_script () {
echo '#!/bin/sh'
typeset pkgname platform
pkgname="`pp_backend_macos_names`"
platform="`pp_backend_macos_probe`"
pp_install_script_common
cat <<.
test \$# -eq 0 && usage
op="\$1"; shift
case "\$op" in
list-components)
test \$# -eq 0 || usage \$op
echo "$pp_components"
;;
list-services)
test \$# -eq 0 || usage \$op
echo "$pp_services"
;;
list-files)
test \$# -ge 1 || usage \$op
echo \${PP_PKGDESTDIR:-.}/"$pkgname"
;;
install)
test \$# -ge 1 || usage \$op
vol=/Volumes/pp\$\$
pkg=\$vol/${name}-${version}.pkg
hdiutil attach -readonly -mountpoint \$vol \
\${PP_PKGDESTDIR:-.}/"$pkgname"
trap "hdiutil detach \$vol" 0
installer -pkginfo -pkg \$pkg
installer -verbose -pkg \$pkg -target /
;;
uninstall)
test \$# -ge 1 || usage \$op
# XXX
echo "Uninstall not implemented" >&2
exit 1;;
start|stop)
test \$# -ge 1 || usage \$op
ec=0
for svc
do
# XXX
echo "\${op} not implemented" >&2
ec=1
done
exit \$ec
;;
print-platform)
echo "$platform"
;;
*)
usage;;
esac
.
}
pp_backend_macos_init_svc_vars () {
pp_macos_start_services_after_install=false
pp_macos_service_name=
pp_macos_default_service_id_prefix="com.quest.rc."
pp_macos_service_id=
pp_macos_service_user=
pp_macos_service_group=
pp_macos_service_initgroups=
pp_macos_service_umask=
pp_macos_service_cwd=
pp_macos_service_nice=
pp_macos_svc_plist_file=
}
pp_macos_launchd_plist () {
typeset svc svc_id
svc="$1"
svc_id="$2"
set -- $cmd
if [ -n "$pp_macos_svc_plist_file" ]; then
echo "## Launchd plist file already defined at $pp_macos_svc_plist_file"
return
fi
echo "## Generating the launchd plist file for $svc"
pp_macos_svc_plist_file="$pp_wrkdir/$svc.plist"
cat <<-. > $pp_macos_svc_plist_file
Label
$svc_id
ProgramArguments
.
while test $# != 0; do
printf " $1\n" >> $pp_macos_svc_plist_file
shift
done
cat <<-. >> $pp_macos_svc_plist_file
KeepAlive
.
if test -n "$pp_macos_service_user"; then
printf " UserName\n" >> $pp_macos_svc_plist_file
printf " $pp_macos_service_user\n" >> $pp_macos_svc_plist_file
fi
if test -n "$pp_macos_service_group"; then
printf " GroupName\n" >> $pp_macos_svc_plist_file
printf " $pp_macos_service_group\n" >> $pp_macos_svc_plist_file
fi
if test -n "$pp_macos_service_initgroups"; then
printf " InitGroups\n" >> $pp_macos_svc_plist_file
printf " $pp_macos_service_initgroups\n" >> $pp_macos_svc_plist_file
fi
if test -n "$pp_macos_service_umask"; then
printf " Umask\n" >> $pp_macos_svc_plist_file
printf " $pp_macos_service_umask\n" >> $pp_macos_svc_plist_file
fi
if test -n "$pp_macos_service_cwd"; then
printf " WorkingDirectory\n" >> $pp_macos_svc_plist_file
printf " $pp_macos_service_cwd\n" >> $pp_macos_svc_plist_file
fi
if test -n "$pp_macos_service_nice"; then
printf " Nice\n" >> $pp_macos_svc_plist_file
printf " $pp_macos_service_nice\n" >> $pp_macos_svc_plist_file
fi
cat <<-. >> $pp_macos_svc_plist_file
.
}
pp_macos_add_service () {
typeset svc svc_id plist_file plist_dir
pp_load_service_vars "$1"
svc=${pp_macos_service_name:-$1}
svc_id=${pp_macos_service_id:-$pp_macos_default_service_id_prefix$svc}
#-- create a plist file for svc
pp_macos_launchd_plist "$svc" "$svc_id"
#-- copy the plist file into place and add to %files
plist_dir="/Library/LaunchDaemons"
plist_file="$plist_dir/$svc_id.plist"
mkdir -p "$pp_destdir/$plist_dir"
cp "$pp_macos_svc_plist_file" "$pp_destdir/$plist_file"
pp_add_file_if_missing "$plist_file"
#-- add code to start the service on install
${pp_macos_start_services_after_install} && <<-. >> $pp_wrkdir/%post.$svc
# start service '$svc' automatically after install
launchctl load "$plist_file"
.
}
pp_backend_macos_probe () {
typeset name vers arch
case `sw_vers -productName` in
"Mac OS X") name="macos";;
*) name="unknown";;
esac
vers=`sw_vers -productVersion | sed -e 's/^\([^.]*\)\.\([^.]*\).*/\1\2/'`
arch=`arch`
echo "$name$vers-$arch"
}
pp_backend_macos_vas_platforms () {
echo "osx" # XXX non-really sure what they do.. it should be "macos"
}
pp_backend_macos_function () {
case "$1" in
_pp_macos_search_unused) cat<<'.';;
# Find an unused value in the given path
# args: path attribute minid [maxid]
pp_tmp_val=$3
while :; do
test $pp_tmp_val -ge ${4:-999999} && return 1
/usr/bin/dscl . -search "$1" "$2" $pp_tmp_val |
grep . > /dev/null || break
pp_tmp_val=`expr $pp_tmp_val + 1`
done
echo $pp_tmp_val
.
pp_mkgroup:depends) echo _pp_macos_search_unused;;
pp_mkgroup) cat<<'.';;
set -e
/usr/bin/dscl . -read /Groups/"$1" >/dev/null 2>&1 && return
pp_tmp_gid=`_pp_macos_search_unused /Groups PrimaryGroupID 100`
/usr/bin/dscl . -create /Groups/"$1"
/usr/bin/dscl . -create /Groups/"$1" PrimaryGroupID $pp_tmp_gid
/usr/bin/dscl . -create /Groups/"$1" RealName "Group $1"
/usr/bin/dscl . -create /Groups/"$1" GroupMembership ""
/usr/bin/dscl . -create /Groups/"$1" Password '*'
.
pp_mkuser:depends) echo pp_mkgroup _pp_macos_search_unused;;
pp_mkuser) cat<<'.';;
set -e
/usr/bin/dscl . -read /Users/"$1" >/dev/null 2>&1 && return
pp_tmp_uid=`_pp_macos_search_unused /Users UniqueID 100`
pp_mkgroup "${2:-$1}"
pp_tmp_gid=`/usr/bin/dscl . -read /Groups/"${2:-$1}" \
PrimaryGroupID | awk '{print $2}'`
/usr/bin/dscl . -create /Users/"$1"
/usr/bin/dscl . -create /Users/"$1" PrimaryGroupID $pp_tmp_gid
/usr/bin/dscl . -create /Users/"$1" NFSHomeDirectory \
"${3:-/var/empty}"
/usr/bin/dscl . -create /Users/"$1" UserShell \
"${4:-/usr/bin/false}"
/usr/bin/dscl . -create /Users/"$1" RealName "$1"
/usr/bin/dscl . -create /Users/"$1" UniqueID $pp_tmp_uid
/usr/bin/dscl . -create /Users/"$1" Password '*'
.
pp_havelib) cat<<'.';;
# (use otool -L to find dependent libraries)
for pp_tmp_dir in `echo "${3:+$3:}/usr/local/lib:/lib:/usr/lib" |
tr : ' '`; do
test -r "$pp_tmp_dir/lib$1{$2:+.$2}.dylib" && return 0
done
return 1
.
*) false;;
esac
}
pp_platforms="$pp_platforms inst"
pp_backend_inst_detect () {
case "$1" in
IRIX*) return 0;;
*) return 1;;
esac
}
pp_backend_inst_init () {
pp_readlink_fn=pp_ls_readlink
}
pp_backend_inst_create_idb()
{
typeset t m o g f p st
while read t m o g f p st; do
if test x"$o" = x"-"; then
o="root"
fi
if test x"$g" = x"-"; then
g="sys"
fi
case "$t" in
f) test x"$m" = x"-" && m=444
echo "f 0$m $o $g $p $p $name.sw.base"
;;
d) test x"$m" = x"-" && m=555
echo "d 0$m $o $g $p $p $name.sw.base"
;;
s) test x"$m" = x"-" && m=777
test x"$m" = x"777" ||
pp_warn "$p: invalid mode $m for symlink, should be 777 or -"
echo "l 0$m $o $g $p $p $name.sw.base symval($st)"
;;
esac
done
}
pp_backend_inst_create_spec()
{
echo "product $name"
echo " id \"${summary}. Version: ${version}\""
echo " image sw"
echo " id \"Software\""
echo " version $version"
echo " order 9999"
echo " subsys base"
echo " id \"Base Software\""
echo " replaces self"
echo " exp $name.sw.base"
echo " endsubsys"
echo " endimage"
echo "endproduct"
}
pp_backend_inst () {
curdir=`pwd`
cd "$pp_opt_wrkdir"
# initialize
pp_inst_tardist=tardist
pp_inst_spec=${name}.spec
pp_inst_idb=${name}.idb
rm -rf $pp_inst_tardist $pp_inst_spec $pp_inst_idb
mkdir -p $pp_inst_tardist
# Create idb file
(for _cmp in $pp_components; do
cat %files.$_cmp | sort +4u -6 | pp_backend_inst_create_idb
done) >> $pp_inst_idb
pp_backend_inst_create_spec >> $pp_inst_spec
# Generate tardist
gendist -verbose -all -root / -source $pp_opt_destdir -idb $pp_inst_idb -spec $pp_inst_spec -dist $pp_inst_tardist $name
tar -cvf `pp_backend_inst_names` $pp_inst_tardist
cd "$curdir"
}
pp_backend_inst_cleanup () {
:
}
pp_backend_inst_names () {
echo ${name}-${version}.tardist
}
pp_backend_inst_install_script () {
:
}
pp_backend_inst_function () {
echo false
}
pp_backend_inst_init_svc_vars () {
:
}
pp_backend_inst_probe () {
cpu=`hinv|sed -n '/^CPU/{s/000 /k /;s/^CPU: //;s/ Process.*//;s/^MIPS //;p;q;}'|tr A-Z a-z`
echo irix`uname -r`-$cpu
}
pp_backend_inst_vas_platforms () {
echo "irix-65"
}
pp_platforms="$pp_platforms null"
pp_backend_null_detect () {
! :
}
pp_backend_null_init () {
:
}
pp_backend_null () {
:
}
pp_backend_null_cleanup () {
:
}
pp_backend_null_names () {
:
}
pp_backend_null_install_script () {
:
}
pp_backend_null_function () {
echo false
}
pp_backend_null_init_svc_vars () {
:
}
pp_backend_null_probe () {
echo unknown-unknown
}
pp_backend_null_vas_platforms () {
:
}
quest_require_vas () {
typeset v d
if test $# -ne 1; then
return
fi
set -- `echo "$1" | tr . ' '` 0 0 0
for d
do
echo $d | grep '^[0-9][0-9]*$' > /dev/null ||
pp_error "quest_require_vas: Bad version component $d"
done
test $# -lt 4 &&
pp_error "quest_require_vas: missing version number"
case "$1.$2.$3.$4" in
*.0.0.0) v=$1;;
*.*.0.0) v=$1.$2;;
*.*.*.0) v=$1.$2.$3;;
*) v=$1.$2.$3.$4;;
esac
cat <<.
if test -x /opt/quest/bin/vastool &&
/opt/quest/bin/vastool -v |
awk 'NR == 1 {print \$4}' |
awk -F. '{ if (\$1<$1 || \$1==$1 && ( \
\$2<$2 || \$2==$2 && ( \
\$3<$3 || \$2==$3 && ( \
\$4<$4 )))) exit(1); }'
then
exit 0
else
echo "Requires VAS $v or later"
exit 1
fi
.
}
pp_main ${1+"$@"}